axis-java-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From d...@apache.org
Subject svn commit: r475341 [10/15] - in /webservices/axis2/branches/java/new-trunk: ./ modules/adb-codegen/ modules/adb/ modules/addressing/test-resources/invalid-cardinality-messages/final/ modules/addressing/test-resources/invalid-cardinality-messages/submi...
Date Wed, 15 Nov 2006 18:16:07 GMT
Modified: webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample03/client.axis2.xml
URL: http://svn.apache.org/viewvc/webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample03/client.axis2.xml?view=diff&rev=475341&r1=475340&r2=475341
==============================================================================
--- webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample03/client.axis2.xml (original)
+++ webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample03/client.axis2.xml Wed Nov 15 10:15:56 2006
@@ -1,212 +1,212 @@
-<axisconfig name="AxisJava2.0">
-
-	<module ref="rampart" />
-	
-    <parameter name="OutflowSecurity">
-      <action>
-        <items>UsernameToken</items>
-        <user>bob</user>
-        <passwordCallbackClass>org.apache.rampart.samples.sample03.PWCBHandler</passwordCallbackClass>
-        <passwordType>PasswordText</passwordType>
-      </action>
-    </parameter>
-    	
-    <!-- ================================================= -->
-    <!-- Parameters -->
-    <!-- ================================================= -->
-    <parameter name="hotdeployment" locked="false">true</parameter>
-    <parameter name="hotupdate" locked="false">false</parameter>
-    <parameter name="enableMTOM" locked="false">false</parameter>
-
-    <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
-    <!--that behaviour.-->
-    <parameter name="sendStacktraceDetailsWithFaults" locked="false">true</parameter>
-
-    <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
-    <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
-    <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
-    <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
-    <parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>
-
-    <!--This is the user name and password of admin console-->
-    <parameter name="userName" locked="false">admin</parameter>
-    <parameter name="password" locked="false">axis2</parameter>
-
-    <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
-    <!--<parameter name="services" locked="false">service</parameter>-->
-    <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
-    <!--<parameter name="modules" locked="false">modules</parameter>-->
-
-    <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
-    <!--root which can configured using the following contextRoot parameter-->
-    <!--<parameter name="contextRoot" locked="false">axis2</parameter>-->
-
-    <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguish those endpoints-->
-    <!--<parameter name="servicePath" locked="false">services</parameter>-->
-    <!--<parameter name="restPath" locked="false">rest</parameter>-->
-
-    <!--Set the flag to true if you want to enable transport level session management-->
-    <parameter name="manageTransportSession" locked="false">false</parameter>
-
-    <!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
-    <!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
-    <!--parameters help to tweak the message handling of two main servlets. -->
-
-    <!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
-    <parameter name="enableRESTInAxis2MainServlet" locked="true">true</parameter>
-
-    <!-- Following parameter will completely disable REST handling in both the servlets-->
-    <parameter name="disableREST" locked="true">false</parameter>
-
-    <!-- This will disable the separate servlet we have for REST handling. -->
-    <parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>
-
-
-
-    <!-- ================================================= -->
-    <!-- Message Receivers -->
-    <!-- ================================================= -->
-    <!--This is the Default Message Receiver for the system , if you want to have MessageReceivers for -->
-    <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
-    <!--any operation -->
-    <!--Note : You can override this for particular service by adding the same element with your requirement-->
-    <messageReceivers>
-        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
-                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
-        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
-                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
-    </messageReceivers>
-
-    <!-- ================================================= -->
-    <!-- Target Resolvers -->
-    <!-- ================================================= -->
-    <!-- Uncomment the following and specify the class name for your TargetResolver to add -->
-    <!-- a TargetResolver. TargetResolvers are used to process the To EPR for example to -->
-    <!-- choose a server in a cluster -->
-    <!--<targetResolvers>-->
-    <!--<targetResolver class="" />-->
-    <!--</targetResolvers>-->
-
-
-    <!-- ================================================= -->
-    <!-- Transport Ins -->
-    <!-- ================================================= -->
-    <transportReceiver name="http"
-                       class="org.apache.axis2.transport.http.SimpleHTTPServer">
-        <parameter name="port" locked="false">6060</parameter>
-        <!--If you want to give your own host address for EPR generation-->
-        <!--uncomment following parameter , and set as you required.-->
-        <!--<parameter name="hostname" locked="false">http://myApp.com/ws</parameter>-->
-    </transportReceiver>
-
-    <transportReceiver name="tcp"
-                       class="org.apache.axis2.transport.tcp.TCPServer">
-        <parameter name="port" locked="false">6061</parameter>
-        <!--If you want to give your own host address for EPR generation-->
-        <!--uncomment following parameter , and set as you required.-->
-        <!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>-->
-    </transportReceiver>
-
-    <!-- ================================================= -->
-    <!-- Transport Outs -->
-    <!-- ================================================= -->
-
-    <transportSender name="jms"
-                     class="org.apache.axis2.transport.jms.JMSSender"/>
-    <transportSender name="tcp"
-                     class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
-    <transportSender name="local"
-                     class="org.apache.axis2.transport.local.LocalTransportSender"/>
-    <transportSender name="http"
-                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
-        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
-        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
-    </transportSender>
-    <transportSender name="https"
-                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
-        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
-        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
-    </transportSender>
-
-    <!-- ================================================= -->
-    <!-- Phases  -->
-    <!-- ================================================= -->
-    <phaseOrder type="InFlow">
-        <!--  System pre-defined phases       -->
-         <phase name="Transport">
-            <handler name="RequestURIBasedDispatcher"
-                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
-                <order phase="Transport"/>
-            </handler>
-            <handler name="SOAPActionBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
-                <order phase="Transport"/>
-            </handler>
-        </phase>
-        <phase name="Security"/>
-        <phase name="PreDispatch"/>
-        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
-            <handler name="AddressingBasedDispatcher"
-                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="SOAPMessageBodyBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-            <handler name="InstanceDispatcher"
-                     class="org.apache.axis2.engine.InstanceDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-        </phase>
-        <!--  System pre defined phases       -->
-        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
-        <phase name="OperationInPhase"/>
-    </phaseOrder>
-    <phaseOrder type="OutFlow">
-        <!--      user can add his own phases to this area  -->
-        <phase name="OperationOutPhase"/>
-        <!--system predefined phase-->
-        <!--these phase will run irrespective of the service-->
-        <phase name="PolicyDetermination"/>
-        <phase name="MessageOut"/>
-        <phase name="Security"/>
-    </phaseOrder>
-    <phaseOrder type="InFaultFlow">
-        <phase name="PreDispatch"/>
-        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
-            <handler name="RequestURIBasedDispatcher"
-                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="SOAPActionBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="AddressingBasedDispatcher"
-                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="SOAPMessageBodyBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-            <handler name="InstanceDispatcher"
-                     class="org.apache.axis2.engine.InstanceDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-        </phase>
-        <!--      user can add his own phases to this area  -->
-        <phase name="OperationInFaultPhase"/>
-    </phaseOrder>
-    <phaseOrder type="OutFaultFlow">
-        <!--      user can add his own phases to this area  -->
-        <phase name="OperationOutFaultPhase"/>
-        <phase name="PolicyDetermination"/>
-        <phase name="MessageOut"/>
-    </phaseOrder>
+<axisconfig name="AxisJava2.0">
+
+	<module ref="rampart" />
+	
+    <parameter name="OutflowSecurity">
+      <action>
+        <items>UsernameToken</items>
+        <user>bob</user>
+        <passwordCallbackClass>org.apache.rampart.samples.sample03.PWCBHandler</passwordCallbackClass>
+        <passwordType>PasswordText</passwordType>
+      </action>
+    </parameter>
+    	
+    <!-- ================================================= -->
+    <!-- Parameters -->
+    <!-- ================================================= -->
+    <parameter name="hotdeployment" locked="false">true</parameter>
+    <parameter name="hotupdate" locked="false">false</parameter>
+    <parameter name="enableMTOM" locked="false">false</parameter>
+
+    <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
+    <!--that behaviour.-->
+    <parameter name="sendStacktraceDetailsWithFaults" locked="false">true</parameter>
+
+    <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
+    <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
+    <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
+    <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
+    <parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>
+
+    <!--This is the user name and password of admin console-->
+    <parameter name="userName" locked="false">admin</parameter>
+    <parameter name="password" locked="false">axis2</parameter>
+
+    <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
+    <!--<parameter name="services" locked="false">service</parameter>-->
+    <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
+    <!--<parameter name="modules" locked="false">modules</parameter>-->
+
+    <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
+    <!--root which can configured using the following contextRoot parameter-->
+    <!--<parameter name="contextRoot" locked="false">axis2</parameter>-->
+
+    <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguish those endpoints-->
+    <!--<parameter name="servicePath" locked="false">services</parameter>-->
+    <!--<parameter name="restPath" locked="false">rest</parameter>-->
+
+    <!--Set the flag to true if you want to enable transport level session management-->
+    <parameter name="manageTransportSession" locked="false">false</parameter>
+
+    <!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
+    <!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
+    <!--parameters help to tweak the message handling of two main servlets. -->
+
+    <!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
+    <parameter name="enableRESTInAxis2MainServlet" locked="true">true</parameter>
+
+    <!-- Following parameter will completely disable REST handling in both the servlets-->
+    <parameter name="disableREST" locked="true">false</parameter>
+
+    <!-- This will disable the separate servlet we have for REST handling. -->
+    <parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>
+
+
+
+    <!-- ================================================= -->
+    <!-- Message Receivers -->
+    <!-- ================================================= -->
+    <!--This is the Default Message Receiver for the system , if you want to have MessageReceivers for -->
+    <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
+    <!--any operation -->
+    <!--Note : You can override this for particular service by adding the same element with your requirement-->
+    <messageReceivers>
+        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
+                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
+        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
+                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
+    </messageReceivers>
+
+    <!-- ================================================= -->
+    <!-- Target Resolvers -->
+    <!-- ================================================= -->
+    <!-- Uncomment the following and specify the class name for your TargetResolver to add -->
+    <!-- a TargetResolver. TargetResolvers are used to process the To EPR for example to -->
+    <!-- choose a server in a cluster -->
+    <!--<targetResolvers>-->
+    <!--<targetResolver class="" />-->
+    <!--</targetResolvers>-->
+
+
+    <!-- ================================================= -->
+    <!-- Transport Ins -->
+    <!-- ================================================= -->
+    <transportReceiver name="http"
+                       class="org.apache.axis2.transport.http.SimpleHTTPServer">
+        <parameter name="port" locked="false">6060</parameter>
+        <!--If you want to give your own host address for EPR generation-->
+        <!--uncomment following parameter , and set as you required.-->
+        <!--<parameter name="hostname" locked="false">http://myApp.com/ws</parameter>-->
+    </transportReceiver>
+
+    <transportReceiver name="tcp"
+                       class="org.apache.axis2.transport.tcp.TCPServer">
+        <parameter name="port" locked="false">6061</parameter>
+        <!--If you want to give your own host address for EPR generation-->
+        <!--uncomment following parameter , and set as you required.-->
+        <!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>-->
+    </transportReceiver>
+
+    <!-- ================================================= -->
+    <!-- Transport Outs -->
+    <!-- ================================================= -->
+
+    <transportSender name="jms"
+                     class="org.apache.axis2.transport.jms.JMSSender"/>
+    <transportSender name="tcp"
+                     class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
+    <transportSender name="local"
+                     class="org.apache.axis2.transport.local.LocalTransportSender"/>
+    <transportSender name="http"
+                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
+        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
+        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
+    </transportSender>
+    <transportSender name="https"
+                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
+        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
+        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
+    </transportSender>
+
+    <!-- ================================================= -->
+    <!-- Phases  -->
+    <!-- ================================================= -->
+    <phaseOrder type="InFlow">
+        <!--  System pre-defined phases       -->
+         <phase name="Transport">
+            <handler name="RequestURIBasedDispatcher"
+                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
+                <order phase="Transport"/>
+            </handler>
+            <handler name="SOAPActionBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
+                <order phase="Transport"/>
+            </handler>
+        </phase>
+        <phase name="Security"/>
+        <phase name="PreDispatch"/>
+        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
+            <handler name="AddressingBasedDispatcher"
+                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="SOAPMessageBodyBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+            <handler name="InstanceDispatcher"
+                     class="org.apache.axis2.engine.InstanceDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+        </phase>
+        <!--  System pre defined phases       -->
+        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
+        <phase name="OperationInPhase"/>
+    </phaseOrder>
+    <phaseOrder type="OutFlow">
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationOutPhase"/>
+        <!--system predefined phase-->
+        <!--these phase will run irrespective of the service-->
+        <phase name="PolicyDetermination"/>
+        <phase name="MessageOut"/>
+        <phase name="Security"/>
+    </phaseOrder>
+    <phaseOrder type="InFaultFlow">
+        <phase name="PreDispatch"/>
+        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
+            <handler name="RequestURIBasedDispatcher"
+                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="SOAPActionBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="AddressingBasedDispatcher"
+                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="SOAPMessageBodyBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+            <handler name="InstanceDispatcher"
+                     class="org.apache.axis2.engine.InstanceDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+        </phase>
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationInFaultPhase"/>
+    </phaseOrder>
+    <phaseOrder type="OutFaultFlow">
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationOutFaultPhase"/>
+        <phase name="PolicyDetermination"/>
+        <phase name="MessageOut"/>
+    </phaseOrder>
 </axisconfig>

Modified: webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample04/client.axis2.xml
URL: http://svn.apache.org/viewvc/webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample04/client.axis2.xml?view=diff&rev=475341&r1=475340&r2=475341
==============================================================================
--- webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample04/client.axis2.xml (original)
+++ webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample04/client.axis2.xml Wed Nov 15 10:15:56 2006
@@ -1,222 +1,222 @@
-<axisconfig name="AxisJava2.0">
-
-	<module ref="rampart" />
-
-	<module ref="rampart" />
-	
-	<parameter name="OutflowSecurity">
-      <action>
-        <items>Timestamp Signature</items>
-        <user>client</user>
-        <signaturePropFile>client.properties</signaturePropFile>
-        <passwordCallbackClass>org.apache.rampart.samples.sample04.PWCBHandler</passwordCallbackClass>
-        <signatureKeyIdentifier>DirectReference</signatureKeyIdentifier>
-      </action>
-    </parameter>
-
-    <parameter name="InflowSecurity">
-      <action>
-        <items>Timestamp Signature</items>
-        <signaturePropFile>client.properties</signaturePropFile>
-      </action>
-    </parameter>
-    
-    <!-- ================================================= -->
-    <!-- Parameters -->
-    <!-- ================================================= -->
-    <parameter name="hotdeployment" locked="false">true</parameter>
-    <parameter name="hotupdate" locked="false">false</parameter>
-    <parameter name="enableMTOM" locked="false">false</parameter>
-
-    <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
-    <!--that behaviour.-->
-    <parameter name="sendStacktraceDetailsWithFaults" locked="false">true</parameter>
-
-    <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
-    <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
-    <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
-    <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
-    <parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>
-
-    <!--This is the user name and password of admin console-->
-    <parameter name="userName" locked="false">admin</parameter>
-    <parameter name="password" locked="false">axis2</parameter>
-
-    <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
-    <!--<parameter name="services" locked="false">service</parameter>-->
-    <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
-    <!--<parameter name="modules" locked="false">modules</parameter>-->
-
-    <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
-    <!--root which can configured using the following contextRoot parameter-->
-    <!--<parameter name="contextRoot" locked="false">axis2</parameter>-->
-
-    <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguish those endpoints-->
-    <!--<parameter name="servicePath" locked="false">services</parameter>-->
-    <!--<parameter name="restPath" locked="false">rest</parameter>-->
-
-    <!--Set the flag to true if you want to enable transport level session management-->
-    <parameter name="manageTransportSession" locked="false">false</parameter>
-
-    <!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
-    <!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
-    <!--parameters help to tweak the message handling of two main servlets. -->
-
-    <!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
-    <parameter name="enableRESTInAxis2MainServlet" locked="true">true</parameter>
-
-    <!-- Following parameter will completely disable REST handling in both the servlets-->
-    <parameter name="disableREST" locked="true">false</parameter>
-
-    <!-- This will disable the separate servlet we have for REST handling. -->
-    <parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>
-
-
-
-    <!-- ================================================= -->
-    <!-- Message Receivers -->
-    <!-- ================================================= -->
-    <!--This is the Default Message Receiver for the system , if you want to have MessageReceivers for -->
-    <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
-    <!--any operation -->
-    <!--Note : You can override this for particular service by adding the same element with your requirement-->
-    <messageReceivers>
-        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
-                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
-        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
-                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
-    </messageReceivers>
-
-    <!-- ================================================= -->
-    <!-- Target Resolvers -->
-    <!-- ================================================= -->
-    <!-- Uncomment the following and specify the class name for your TargetResolver to add -->
-    <!-- a TargetResolver. TargetResolvers are used to process the To EPR for example to -->
-    <!-- choose a server in a cluster -->
-    <!--<targetResolvers>-->
-    <!--<targetResolver class="" />-->
-    <!--</targetResolvers>-->
-
-
-    <!-- ================================================= -->
-    <!-- Transport Ins -->
-    <!-- ================================================= -->
-    <transportReceiver name="http"
-                       class="org.apache.axis2.transport.http.SimpleHTTPServer">
-        <parameter name="port" locked="false">6060</parameter>
-        <!--If you want to give your own host address for EPR generation-->
-        <!--uncomment following parameter , and set as you required.-->
-        <!--<parameter name="hostname" locked="false">http://myApp.com/ws</parameter>-->
-    </transportReceiver>
-
-    <transportReceiver name="tcp"
-                       class="org.apache.axis2.transport.tcp.TCPServer">
-        <parameter name="port" locked="false">6061</parameter>
-        <!--If you want to give your own host address for EPR generation-->
-        <!--uncomment following parameter , and set as you required.-->
-        <!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>-->
-    </transportReceiver>
-
-    <!-- ================================================= -->
-    <!-- Transport Outs -->
-    <!-- ================================================= -->
-
-    <transportSender name="jms"
-                     class="org.apache.axis2.transport.jms.JMSSender"/>
-    <transportSender name="tcp"
-                     class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
-    <transportSender name="local"
-                     class="org.apache.axis2.transport.local.LocalTransportSender"/>
-    <transportSender name="http"
-                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
-        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
-        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
-    </transportSender>
-    <transportSender name="https"
-                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
-        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
-        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
-    </transportSender>
-
-    <!-- ================================================= -->
-    <!-- Phases  -->
-    <!-- ================================================= -->
-    <phaseOrder type="InFlow">
-        <!--  System pre-defined phases       -->
-         <phase name="Transport">
-            <handler name="RequestURIBasedDispatcher"
-                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
-                <order phase="Transport"/>
-            </handler>
-            <handler name="SOAPActionBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
-                <order phase="Transport"/>
-            </handler>
-        </phase>
-        <phase name="Security"/>
-        <phase name="PreDispatch"/>
-        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
-            <handler name="AddressingBasedDispatcher"
-                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="SOAPMessageBodyBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-            <handler name="InstanceDispatcher"
-                     class="org.apache.axis2.engine.InstanceDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-        </phase>
-        <!--  System pre defined phases       -->
-        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
-        <phase name="OperationInPhase"/>
-    </phaseOrder>
-    <phaseOrder type="OutFlow">
-        <!--      user can add his own phases to this area  -->
-        <phase name="OperationOutPhase"/>
-        <!--system predefined phase-->
-        <!--these phase will run irrespective of the service-->
-        <phase name="PolicyDetermination"/>
-        <phase name="MessageOut"/>
-        <phase name="Security"/>
-    </phaseOrder>
-    <phaseOrder type="InFaultFlow">
-        <phase name="PreDispatch"/>
-        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
-            <handler name="RequestURIBasedDispatcher"
-                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="SOAPActionBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="AddressingBasedDispatcher"
-                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="SOAPMessageBodyBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-            <handler name="InstanceDispatcher"
-                     class="org.apache.axis2.engine.InstanceDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-        </phase>
-        <!--      user can add his own phases to this area  -->
-        <phase name="OperationInFaultPhase"/>
-    </phaseOrder>
-    <phaseOrder type="OutFaultFlow">
-        <!--      user can add his own phases to this area  -->
-        <phase name="OperationOutFaultPhase"/>
-        <phase name="PolicyDetermination"/>
-        <phase name="MessageOut"/>
-    </phaseOrder>
+<axisconfig name="AxisJava2.0">
+
+	<module ref="rampart" />
+
+	<module ref="rampart" />
+	
+	<parameter name="OutflowSecurity">
+      <action>
+        <items>Timestamp Signature</items>
+        <user>client</user>
+        <signaturePropFile>client.properties</signaturePropFile>
+        <passwordCallbackClass>org.apache.rampart.samples.sample04.PWCBHandler</passwordCallbackClass>
+        <signatureKeyIdentifier>DirectReference</signatureKeyIdentifier>
+      </action>
+    </parameter>
+
+    <parameter name="InflowSecurity">
+      <action>
+        <items>Timestamp Signature</items>
+        <signaturePropFile>client.properties</signaturePropFile>
+      </action>
+    </parameter>
+    
+    <!-- ================================================= -->
+    <!-- Parameters -->
+    <!-- ================================================= -->
+    <parameter name="hotdeployment" locked="false">true</parameter>
+    <parameter name="hotupdate" locked="false">false</parameter>
+    <parameter name="enableMTOM" locked="false">false</parameter>
+
+    <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
+    <!--that behaviour.-->
+    <parameter name="sendStacktraceDetailsWithFaults" locked="false">true</parameter>
+
+    <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
+    <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
+    <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
+    <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
+    <parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>
+
+    <!--This is the user name and password of admin console-->
+    <parameter name="userName" locked="false">admin</parameter>
+    <parameter name="password" locked="false">axis2</parameter>
+
+    <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
+    <!--<parameter name="services" locked="false">service</parameter>-->
+    <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
+    <!--<parameter name="modules" locked="false">modules</parameter>-->
+
+    <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
+    <!--root which can configured using the following contextRoot parameter-->
+    <!--<parameter name="contextRoot" locked="false">axis2</parameter>-->
+
+    <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguish those endpoints-->
+    <!--<parameter name="servicePath" locked="false">services</parameter>-->
+    <!--<parameter name="restPath" locked="false">rest</parameter>-->
+
+    <!--Set the flag to true if you want to enable transport level session management-->
+    <parameter name="manageTransportSession" locked="false">false</parameter>
+
+    <!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
+    <!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
+    <!--parameters help to tweak the message handling of two main servlets. -->
+
+    <!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
+    <parameter name="enableRESTInAxis2MainServlet" locked="true">true</parameter>
+
+    <!-- Following parameter will completely disable REST handling in both the servlets-->
+    <parameter name="disableREST" locked="true">false</parameter>
+
+    <!-- This will disable the separate servlet we have for REST handling. -->
+    <parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>
+
+
+
+    <!-- ================================================= -->
+    <!-- Message Receivers -->
+    <!-- ================================================= -->
+    <!--This is the Default Message Receiver for the system , if you want to have MessageReceivers for -->
+    <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
+    <!--any operation -->
+    <!--Note : You can override this for particular service by adding the same element with your requirement-->
+    <messageReceivers>
+        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
+                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
+        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
+                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
+    </messageReceivers>
+
+    <!-- ================================================= -->
+    <!-- Target Resolvers -->
+    <!-- ================================================= -->
+    <!-- Uncomment the following and specify the class name for your TargetResolver to add -->
+    <!-- a TargetResolver. TargetResolvers are used to process the To EPR for example to -->
+    <!-- choose a server in a cluster -->
+    <!--<targetResolvers>-->
+    <!--<targetResolver class="" />-->
+    <!--</targetResolvers>-->
+
+
+    <!-- ================================================= -->
+    <!-- Transport Ins -->
+    <!-- ================================================= -->
+    <transportReceiver name="http"
+                       class="org.apache.axis2.transport.http.SimpleHTTPServer">
+        <parameter name="port" locked="false">6060</parameter>
+        <!--If you want to give your own host address for EPR generation-->
+        <!--uncomment following parameter , and set as you required.-->
+        <!--<parameter name="hostname" locked="false">http://myApp.com/ws</parameter>-->
+    </transportReceiver>
+
+    <transportReceiver name="tcp"
+                       class="org.apache.axis2.transport.tcp.TCPServer">
+        <parameter name="port" locked="false">6061</parameter>
+        <!--If you want to give your own host address for EPR generation-->
+        <!--uncomment following parameter , and set as you required.-->
+        <!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>-->
+    </transportReceiver>
+
+    <!-- ================================================= -->
+    <!-- Transport Outs -->
+    <!-- ================================================= -->
+
+    <transportSender name="jms"
+                     class="org.apache.axis2.transport.jms.JMSSender"/>
+    <transportSender name="tcp"
+                     class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
+    <transportSender name="local"
+                     class="org.apache.axis2.transport.local.LocalTransportSender"/>
+    <transportSender name="http"
+                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
+        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
+        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
+    </transportSender>
+    <transportSender name="https"
+                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
+        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
+        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
+    </transportSender>
+
+    <!-- ================================================= -->
+    <!-- Phases  -->
+    <!-- ================================================= -->
+    <phaseOrder type="InFlow">
+        <!--  System pre-defined phases       -->
+         <phase name="Transport">
+            <handler name="RequestURIBasedDispatcher"
+                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
+                <order phase="Transport"/>
+            </handler>
+            <handler name="SOAPActionBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
+                <order phase="Transport"/>
+            </handler>
+        </phase>
+        <phase name="Security"/>
+        <phase name="PreDispatch"/>
+        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
+            <handler name="AddressingBasedDispatcher"
+                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="SOAPMessageBodyBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+            <handler name="InstanceDispatcher"
+                     class="org.apache.axis2.engine.InstanceDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+        </phase>
+        <!--  System pre defined phases       -->
+        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
+        <phase name="OperationInPhase"/>
+    </phaseOrder>
+    <phaseOrder type="OutFlow">
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationOutPhase"/>
+        <!--system predefined phase-->
+        <!--these phase will run irrespective of the service-->
+        <phase name="PolicyDetermination"/>
+        <phase name="MessageOut"/>
+        <phase name="Security"/>
+    </phaseOrder>
+    <phaseOrder type="InFaultFlow">
+        <phase name="PreDispatch"/>
+        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
+            <handler name="RequestURIBasedDispatcher"
+                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="SOAPActionBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="AddressingBasedDispatcher"
+                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="SOAPMessageBodyBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+            <handler name="InstanceDispatcher"
+                     class="org.apache.axis2.engine.InstanceDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+        </phase>
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationInFaultPhase"/>
+    </phaseOrder>
+    <phaseOrder type="OutFaultFlow">
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationOutFaultPhase"/>
+        <phase name="PolicyDetermination"/>
+        <phase name="MessageOut"/>
+    </phaseOrder>
 </axisconfig>

Modified: webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample05/client.axis2.xml
URL: http://svn.apache.org/viewvc/webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample05/client.axis2.xml?view=diff&rev=475341&r1=475340&r2=475341
==============================================================================
--- webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample05/client.axis2.xml (original)
+++ webservices/axis2/branches/java/new-trunk/modules/samples/security/basic/sample05/client.axis2.xml Wed Nov 15 10:15:56 2006
@@ -1,219 +1,219 @@
-<axisconfig name="AxisJava2.0">
-
-	<module ref="rampart" />
-
-	<parameter name="OutflowSecurity">
-      <action>
-        <items>Encrypt</items>
-        <encryptionUser>service</encryptionUser>
-        <encryptionPropFile>client.properties</encryptionPropFile>
-      </action>
-    </parameter>
-
-    <parameter name="InflowSecurity">
-      <action>
-        <items>Encrypt</items>
-        <passwordCallbackClass>org.apache.rampart.samples.sample05.PWCBHandler</passwordCallbackClass>
-        <decryptionPropFile>client.properties</decryptionPropFile>
-      </action>
-    </parameter>
-
-    <!-- ================================================= -->
-    <!-- Parameters -->
-    <!-- ================================================= -->
-    <parameter name="hotdeployment" locked="false">true</parameter>
-    <parameter name="hotupdate" locked="false">false</parameter>
-    <parameter name="enableMTOM" locked="false">false</parameter>
-
-    <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
-    <!--that behaviour.-->
-    <parameter name="sendStacktraceDetailsWithFaults" locked="false">true</parameter>
-
-    <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
-    <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
-    <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
-    <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
-    <parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>
-
-    <!--This is the user name and password of admin console-->
-    <parameter name="userName" locked="false">admin</parameter>
-    <parameter name="password" locked="false">axis2</parameter>
-
-    <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
-    <!--<parameter name="services" locked="false">service</parameter>-->
-    <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
-    <!--<parameter name="modules" locked="false">modules</parameter>-->
-
-    <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
-    <!--root which can configured using the following contextRoot parameter-->
-    <!--<parameter name="contextRoot" locked="false">axis2</parameter>-->
-
-    <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguish those endpoints-->
-    <!--<parameter name="servicePath" locked="false">services</parameter>-->
-    <!--<parameter name="restPath" locked="false">rest</parameter>-->
-
-    <!--Set the flag to true if you want to enable transport level session management-->
-    <parameter name="manageTransportSession" locked="false">false</parameter>
-
-    <!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
-    <!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
-    <!--parameters help to tweak the message handling of two main servlets. -->
-
-    <!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
-    <parameter name="enableRESTInAxis2MainServlet" locked="true">true</parameter>
-
-    <!-- Following parameter will completely disable REST handling in both the servlets-->
-    <parameter name="disableREST" locked="true">false</parameter>
-
-    <!-- This will disable the separate servlet we have for REST handling. -->
-    <parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>
-
-
-
-    <!-- ================================================= -->
-    <!-- Message Receivers -->
-    <!-- ================================================= -->
-    <!--This is the Default Message Receiver for the system , if you want to have MessageReceivers for -->
-    <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
-    <!--any operation -->
-    <!--Note : You can override this for particular service by adding the same element with your requirement-->
-    <messageReceivers>
-        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
-                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
-        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
-                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
-    </messageReceivers>
-
-    <!-- ================================================= -->
-    <!-- Target Resolvers -->
-    <!-- ================================================= -->
-    <!-- Uncomment the following and specify the class name for your TargetResolver to add -->
-    <!-- a TargetResolver. TargetResolvers are used to process the To EPR for example to -->
-    <!-- choose a server in a cluster -->
-    <!--<targetResolvers>-->
-    <!--<targetResolver class="" />-->
-    <!--</targetResolvers>-->
-
-
-    <!-- ================================================= -->
-    <!-- Transport Ins -->
-    <!-- ================================================= -->
-    <transportReceiver name="http"
-                       class="org.apache.axis2.transport.http.SimpleHTTPServer">
-        <parameter name="port" locked="false">6060</parameter>
-        <!--If you want to give your own host address for EPR generation-->
-        <!--uncomment following parameter , and set as you required.-->
-        <!--<parameter name="hostname" locked="false">http://myApp.com/ws</parameter>-->
-    </transportReceiver>
-
-    <transportReceiver name="tcp"
-                       class="org.apache.axis2.transport.tcp.TCPServer">
-        <parameter name="port" locked="false">6061</parameter>
-        <!--If you want to give your own host address for EPR generation-->
-        <!--uncomment following parameter , and set as you required.-->
-        <!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>-->
-    </transportReceiver>
-
-    <!-- ================================================= -->
-    <!-- Transport Outs -->
-    <!-- ================================================= -->
-
-    <transportSender name="jms"
-                     class="org.apache.axis2.transport.jms.JMSSender"/>
-    <transportSender name="tcp"
-                     class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
-    <transportSender name="local"
-                     class="org.apache.axis2.transport.local.LocalTransportSender"/>
-    <transportSender name="http"
-                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
-        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
-        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
-    </transportSender>
-    <transportSender name="https"
-                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
-        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
-        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
-    </transportSender>
-
-    <!-- ================================================= -->
-    <!-- Phases  -->
-    <!-- ================================================= -->
-    <phaseOrder type="InFlow">
-        <!--  System pre-defined phases       -->
-         <phase name="Transport">
-            <handler name="RequestURIBasedDispatcher"
-                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
-                <order phase="Transport"/>
-            </handler>
-            <handler name="SOAPActionBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
-                <order phase="Transport"/>
-            </handler>
-        </phase>
-        <phase name="Security"/>
-        <phase name="PreDispatch"/>
-        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
-            <handler name="AddressingBasedDispatcher"
-                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="SOAPMessageBodyBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-            <handler name="InstanceDispatcher"
-                     class="org.apache.axis2.engine.InstanceDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-        </phase>
-        <!--  System pre defined phases       -->
-        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
-        <phase name="OperationInPhase"/>
-    </phaseOrder>
-    <phaseOrder type="OutFlow">
-        <!--      user can add his own phases to this area  -->
-        <phase name="OperationOutPhase"/>
-        <!--system predefined phase-->
-        <!--these phase will run irrespective of the service-->
-        <phase name="PolicyDetermination"/>
-        <phase name="MessageOut"/>
-        <phase name="Security"/>
-    </phaseOrder>
-    <phaseOrder type="InFaultFlow">
-        <phase name="PreDispatch"/>
-        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
-            <handler name="RequestURIBasedDispatcher"
-                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="SOAPActionBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="AddressingBasedDispatcher"
-                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-
-            <handler name="SOAPMessageBodyBasedDispatcher"
-                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-            <handler name="InstanceDispatcher"
-                     class="org.apache.axis2.engine.InstanceDispatcher">
-                <order phase="Dispatch"/>
-            </handler>
-        </phase>
-        <!--      user can add his own phases to this area  -->
-        <phase name="OperationInFaultPhase"/>
-    </phaseOrder>
-    <phaseOrder type="OutFaultFlow">
-        <!--      user can add his own phases to this area  -->
-        <phase name="OperationOutFaultPhase"/>
-        <phase name="PolicyDetermination"/>
-        <phase name="MessageOut"/>
-    </phaseOrder>
+<axisconfig name="AxisJava2.0">
+
+	<module ref="rampart" />
+
+	<parameter name="OutflowSecurity">
+      <action>
+        <items>Encrypt</items>
+        <encryptionUser>service</encryptionUser>
+        <encryptionPropFile>client.properties</encryptionPropFile>
+      </action>
+    </parameter>
+
+    <parameter name="InflowSecurity">
+      <action>
+        <items>Encrypt</items>
+        <passwordCallbackClass>org.apache.rampart.samples.sample05.PWCBHandler</passwordCallbackClass>
+        <decryptionPropFile>client.properties</decryptionPropFile>
+      </action>
+    </parameter>
+
+    <!-- ================================================= -->
+    <!-- Parameters -->
+    <!-- ================================================= -->
+    <parameter name="hotdeployment" locked="false">true</parameter>
+    <parameter name="hotupdate" locked="false">false</parameter>
+    <parameter name="enableMTOM" locked="false">false</parameter>
+
+    <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
+    <!--that behaviour.-->
+    <parameter name="sendStacktraceDetailsWithFaults" locked="false">true</parameter>
+
+    <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
+    <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
+    <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
+    <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
+    <parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>
+
+    <!--This is the user name and password of admin console-->
+    <parameter name="userName" locked="false">admin</parameter>
+    <parameter name="password" locked="false">axis2</parameter>
+
+    <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
+    <!--<parameter name="services" locked="false">service</parameter>-->
+    <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
+    <!--<parameter name="modules" locked="false">modules</parameter>-->
+
+    <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
+    <!--root which can configured using the following contextRoot parameter-->
+    <!--<parameter name="contextRoot" locked="false">axis2</parameter>-->
+
+    <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguish those endpoints-->
+    <!--<parameter name="servicePath" locked="false">services</parameter>-->
+    <!--<parameter name="restPath" locked="false">rest</parameter>-->
+
+    <!--Set the flag to true if you want to enable transport level session management-->
+    <parameter name="manageTransportSession" locked="false">false</parameter>
+
+    <!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
+    <!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
+    <!--parameters help to tweak the message handling of two main servlets. -->
+
+    <!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
+    <parameter name="enableRESTInAxis2MainServlet" locked="true">true</parameter>
+
+    <!-- Following parameter will completely disable REST handling in both the servlets-->
+    <parameter name="disableREST" locked="true">false</parameter>
+
+    <!-- This will disable the separate servlet we have for REST handling. -->
+    <parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>
+
+
+
+    <!-- ================================================= -->
+    <!-- Message Receivers -->
+    <!-- ================================================= -->
+    <!--This is the Default Message Receiver for the system , if you want to have MessageReceivers for -->
+    <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
+    <!--any operation -->
+    <!--Note : You can override this for particular service by adding the same element with your requirement-->
+    <messageReceivers>
+        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
+                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
+        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
+                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
+    </messageReceivers>
+
+    <!-- ================================================= -->
+    <!-- Target Resolvers -->
+    <!-- ================================================= -->
+    <!-- Uncomment the following and specify the class name for your TargetResolver to add -->
+    <!-- a TargetResolver. TargetResolvers are used to process the To EPR for example to -->
+    <!-- choose a server in a cluster -->
+    <!--<targetResolvers>-->
+    <!--<targetResolver class="" />-->
+    <!--</targetResolvers>-->
+
+
+    <!-- ================================================= -->
+    <!-- Transport Ins -->
+    <!-- ================================================= -->
+    <transportReceiver name="http"
+                       class="org.apache.axis2.transport.http.SimpleHTTPServer">
+        <parameter name="port" locked="false">6060</parameter>
+        <!--If you want to give your own host address for EPR generation-->
+        <!--uncomment following parameter , and set as you required.-->
+        <!--<parameter name="hostname" locked="false">http://myApp.com/ws</parameter>-->
+    </transportReceiver>
+
+    <transportReceiver name="tcp"
+                       class="org.apache.axis2.transport.tcp.TCPServer">
+        <parameter name="port" locked="false">6061</parameter>
+        <!--If you want to give your own host address for EPR generation-->
+        <!--uncomment following parameter , and set as you required.-->
+        <!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>-->
+    </transportReceiver>
+
+    <!-- ================================================= -->
+    <!-- Transport Outs -->
+    <!-- ================================================= -->
+
+    <transportSender name="jms"
+                     class="org.apache.axis2.transport.jms.JMSSender"/>
+    <transportSender name="tcp"
+                     class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
+    <transportSender name="local"
+                     class="org.apache.axis2.transport.local.LocalTransportSender"/>
+    <transportSender name="http"
+                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
+        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
+        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
+    </transportSender>
+    <transportSender name="https"
+                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
+        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
+        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
+    </transportSender>
+
+    <!-- ================================================= -->
+    <!-- Phases  -->
+    <!-- ================================================= -->
+    <phaseOrder type="InFlow">
+        <!--  System pre-defined phases       -->
+         <phase name="Transport">
+            <handler name="RequestURIBasedDispatcher"
+                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
+                <order phase="Transport"/>
+            </handler>
+            <handler name="SOAPActionBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
+                <order phase="Transport"/>
+            </handler>
+        </phase>
+        <phase name="Security"/>
+        <phase name="PreDispatch"/>
+        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
+            <handler name="AddressingBasedDispatcher"
+                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="SOAPMessageBodyBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+            <handler name="InstanceDispatcher"
+                     class="org.apache.axis2.engine.InstanceDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+        </phase>
+        <!--  System pre defined phases       -->
+        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
+        <phase name="OperationInPhase"/>
+    </phaseOrder>
+    <phaseOrder type="OutFlow">
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationOutPhase"/>
+        <!--system predefined phase-->
+        <!--these phase will run irrespective of the service-->
+        <phase name="PolicyDetermination"/>
+        <phase name="MessageOut"/>
+        <phase name="Security"/>
+    </phaseOrder>
+    <phaseOrder type="InFaultFlow">
+        <phase name="PreDispatch"/>
+        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
+            <handler name="RequestURIBasedDispatcher"
+                     class="org.apache.axis2.engine.RequestURIBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="SOAPActionBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="AddressingBasedDispatcher"
+                     class="org.apache.axis2.engine.AddressingBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+
+            <handler name="SOAPMessageBodyBasedDispatcher"
+                     class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+            <handler name="InstanceDispatcher"
+                     class="org.apache.axis2.engine.InstanceDispatcher">
+                <order phase="Dispatch"/>
+            </handler>
+        </phase>
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationInFaultPhase"/>
+    </phaseOrder>
+    <phaseOrder type="OutFaultFlow">
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationOutFaultPhase"/>
+        <phase name="PolicyDetermination"/>
+        <phase name="MessageOut"/>
+    </phaseOrder>
 </axisconfig>



---------------------------------------------------------------------
To unsubscribe, e-mail: axis-cvs-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-cvs-help@ws.apache.org


Mime
View raw message