cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Ahmad Emneina <aemne...@gmail.com>
Subject Re: CS 4.2 System VMs not starting
Date Sat, 19 Oct 2013 19:21:42 GMT
Log into the vm console, can the system vm ping the respective gateways of each interface?
Are the interfaces configured properly? Can you ping the management server from the system
vm?

Ahmad

> On Oct 19, 2013, at 11:58 AM, motty cruz <motty.cruz@gmail.com> wrote:
> 
> management traffic is an separate interface eth1 bridge to cloudbr1,
> public traffic and guest on eth0 bridge to cloudbr0
> 
> I can't ping public ip, private(management) or local lik
> 
> Public IP Address 98.234.34.208
> Private IP Address 10.107.0.89
> Link Local IP Address 169.254.1.180
> 
> both system VMs are running, I can't go past this? any ideas? or
> suggestions?
> 
> Thanks
> 
> 
> 
> 
>> On Sat, Oct 19, 2013 at 10:59 AM, motty cruz <motty.cruz@gmail.com> wrote:
>> 
>> Thanks for you support on this matter! it is of a streamly importance. I
>> can't VNC into the macine, I get the error "no route to hosts"
>> 
>> yes the zone is enable!
>> 
>> I personally don't think it has to do with VLANs because management
>> traffic does not have VLANs but I could be wrong, also I disabled iptables
>> and selinux but not able to resolve this issue.
>> 
>> 
>> 
>> 
>> On Sat, Oct 19, 2013 at 10:08 AM, raj kumar <rajkumar600003@gmail.com>wrote:
>> 
>>> Can you check whether zone is enabled? if not enabled it.
>>> 
>>> 
>>>> On Sat, Oct 19, 2013 at 9:34 PM, Erdősi Péter <fazy@niif.hu> wrote:
>>>> 
>>>> Hy,
>>>> 
>>>> Can you try to vnc to sysvm machine?
>>>> root/password should be work, if you use the default sysvm template.
>>>> 
>>>> 
>>>> Peter
>>>> 
>>>> 2013.10.19. 17:33 keltezéssel, motty cruz írta:
>>>> 
>>>> thank you;
>>>>> I found the file :
>>>>> [root@kvm1 .ssh]# ls
>>>>> id_rsa.cloud  id_rsa.pub.cloud  known_hosts
>>>>> [root@kvm1 .ssh]#
>>>>> 
>>>>> 
>>>>> [root@kvm1 network-scripts]# ssh -i ~/.ssh/id_rsa.cloud -p 3922
>>>>> 169.254.2.56
>>>>> ssh: connect to host 169.254.2.56 port 3922: No route to host
>>>>> [root@kvm1 network-scripts]#
>>>>> 
>>>>> 
>>>>> I get no route to host, I'm running out of ideas. please help
>>>>> 
>>>>> 
>>>>> 
>>>>> On Thu, Oct 17, 2013 at 9:15 PM, Jayapal Reddy Uradi <
>>>>> jayapalreddy.uradi@citrix.com> wrote:
>>>>> 
>>>>> Hi,
>>>>>> 
>>>>>> use the key file at /root/.ssh/id_rsa.cloud
>>>>>> If it not found, locate key file
>>>>>> 
>>>>>> 
>>>>>> Thanks,
>>>>>> Jayapal
>>>>>> 
>>>>>> On 18-Oct-2013, at 2:41 AM, motty cruz <motty.cruz@gmail.com>
wrote:
>>>>>> 
>>>>>> Thanks Peter,
>>>>>>> I tried the command you suggested,
>>>>>>> 
>>>>>>> [root@kvm1 network-scripts]# ssh -i .ssh/id_rsa.cloud -p 3922
>>>>>> 169.254.3.53
>>>>>> 
>>>>>>> Warning: Identity file .ssh/id_rsa.cloud not accessible: No such
>>> file or
>>>>>>> directory.
>>>>>>> ssh: connect to host 169.254.3.53 port 3922: No route to host
>>>>>>> [root@kvm1 network-scripts]#
>>>>>>> 
>>>>>>> do you mind providing  the config file of your vlans? I believe
VLANs
>>>>>>> are
>>>>>>> not configure properly
>>>>>>> here is my management/storage bridge
>>>>>>> less ifcfg-eth1:
>>>>>>> 
>>>>>>> DEVICE=eth1
>>>>>>> HWADDR=00:25:90:88:51:5D
>>>>>>> ONBOOT=yes
>>>>>>> BRIDGE=cloudbr1
>>>>>>> [root@kvm1 network-scripts]#
>>>>>>> 
>>>>>>> less ifcfg-cloudbr1:
>>>>>>> DEVICE=cloudbr1
>>>>>>> ONBOOT=yes
>>>>>>> TYPE=Bridge
>>>>>>> IPADDR=10.107.0.7
>>>>>>> NETMASK=255.255.255.0
>>>>>>> DNS1=8.8.8.8
>>>>>>> DNS2=10.0.10.0
>>>>>>> 
>>>>>>> Thank you for your support!
>>>>>>> 
>>>>>>> 
>>>>>>> On Thu, Oct 17, 2013 at 1:45 PM, Erdősi Péter <fazy@niif.hu>
wrote:
>>>>>>> 
>>>>>>> Hello!
>>>>>>>> 
>>>>>>>> I stucked something like this in Xen.
>>>>>>>> The problem was the networks (and vlans) on sysvm.
>>>>>>>> Can you ssh it (in xen,  ssh -i .ssh/id_rsa.cloud -p 3922
>>> 169.254.X.Y
>>>>>>>> from the xen host machine, which own the guest), and check
the
>>> network
>>>>>>>> avaibility of the system vm?
>>>>>>>> 
>>>>>>>> Best regards,
>>>>>>>> Peter
>>>>>>>> 
>>>>>>>> 
>>>>>>>> 2013.10.17. 22:31 keltezéssel, motty cruz írta:
>>>>>>>> 
>>>>>>>> Hello, install Cloudstack 4.2 with KVM hypervisors, Console
Proxy MV
>>>>>>>> 
>>>>>>>>> started but I am not able to ping the private or public
IP, second
>>> VM
>>>>>>>>> won't
>>>>>>>>> start. When I ran the command
>>>>>>>>> [root@kvm1 network-scripts]# virsh list
>>>>>>>>>  Id    Name                           State
>>>>>>>>> ------------------------------****----------------------
>>>>>>>>>  2     v-2-VM                         running
>>>>>>>>>  4     s-3-VM                         running
>>>>>>>>> 
>>>>>>>>> [root@kvm1 network-scripts]#
>>>>>>>>> 
>>>>>>>>> I see both VMs running; I configured zone with advance
network,
>>>>>>>>> guest/public network on eth0, management/storage on eth1
>>>>>>>>> 
>>>>>>>>> any ideas or suggestions?
>>>>>>>>> 
>>>>>>>>> Thanks,
>> 
>> 

Mime
View raw message