cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Chirag Choudhary <chirag200...@gmail.com>
Subject Re: could not register iso
Date Thu, 17 Oct 2013 11:45:15 GMT
Hi Raj,
   You don't have to configure bridges on the host in the first place, as
you pointed out cloudstack does that, check if the version of system
template you have added is correct. As pointed out reboot ssvm once.

      The above log is a warning not an error, I am not sure about the
reason as I am getting this warning, but everything else seems to work
fine, I added KVM and Xen hosts, created instances. Can you post detailed
logs from management server , cloud agent logs and the ssvm logs.

Regards,


On Thu, Oct 17, 2013 at 3:05 PM, raj kumar <rajkumar600003@gmail.com> wrote:

> configured manually link-local ip listed in the web in ssvm with gateway
> ip(hypervisor link local ip)
> stopped iptables in both hypervisor and ssvm. I can able to ssh. if
> iptables is running i can't ssh.
> tried adding iso. but not successful.
>
> log shows
> [storage.endpoint.DefaultEndPointSelector] (StatsCollector-2:null) No
> running ssvm is found, so command will be sent to LocalHostEndPoint.
>
>
> On Thu, Oct 17, 2013 at 12:03 PM, raj kumar <rajkumar600003@gmail.com
> >wrote:
>
> > Thank you all for your responses.
> >
> > After refering logs and logging into console through virsh, seen that
> > there is no link-local ip even though the link ip address is listed in
> web
> > console. there is only 127.0.0.1 configure in ssvm.  So where i'm
> missing.
> >
> > I'm using basic network, no vlans. only one subnet. Also pls note I
> > skipped totally "8.1.7.2. Configuring the network bridges" from the
> > installation guide for kvm hypervisor. But cloudstack itself has created
> > cloud0, cloudbr0 and vnet interfaces.
> >
> > -Raj
> >
> >
> > On Thu, Oct 17, 2013 at 12:48 AM, Nitin Mehta <Nitin.Mehta@citrix.com
> >wrote:
> >
> >> Did you reboot the SSVM as well ? You might have to do this to take into
> >> affect. Let me know if that resolves it for you.
> >>
> >> On 16/10/13 6:22 AM, "raj kumar" <rajkumar600003@gmail.com> wrote:
> >>
> >> >Hi,
> >> >
> >> >while registering iso, registration is successful, but it is not ready
> >> for
> >> >use. after 20 to 30sec, it vanishes.  I've added the http server in
> >> global
> >> >settings secstorage.allowed.internal.sites. still no luck.
> >> >
> >> >both secodary and console system vms are running.
> >>
> >>
> >
>



-- 
Chirag Choudhary,
Software Engineer

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message