cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Sanjeev Neelarapu <sanjeev.neelar...@citrix.com>
Subject RE: CS 4.2 Advance Zone System VM won't start
Date Thu, 17 Oct 2013 06:38:48 GMT
Did you allow ping traffic in ingress rules in the guest network?

-----Original Message-----
From: motty cruz [mailto:motty.cruz@gmail.com] 
Sent: Saturday, October 12, 2013 2:44 AM
To: users@cloudstack.apache.org
Subject: Re: CS 4.2 Advance Zone System VM won't start

So after changing my gateway to public address my System VMs started, I was able to download
a ISO install an instance but I'm unable to ping the instance, or the VR, guest CIDR 10.1.1.0/24
guest traffic is in the same network as public traffic using vlan 100.
this is how eth0 public interface looks like

DEVICE=eth0
HWADDR=00:15:17:7B:67:65
ONBOOT=yes
BRIDGE=cloudbr0

DEVICE=eth0.99
HWADDR=00:15:17:7B:67:65
ONBOOT=yes
VLAN=yes


DEVICE=eth0.100
HWADDR=00:15:17:7B:67:65
ONBOOT=yes
VLAN=yes

I'm not sure if this is correct?
Thanks,





On Fri, Oct 11, 2013 at 1:03 PM, motty cruz <motty.cruz@gmail.com> wrote:

> Thank you very much,
> my gateway was set to local network,
>
> Thanks,
>
>
> On Fri, Oct 11, 2013 at 12:17 PM, Amogh Vasekar <amogh.vasekar@citrix.com>wrote:
>
>> Possibly - Your default gateway on the host is set to your internal 
>> 192.* gateway? What does route -n say?
>>
>> Thanks,
>> Amogh
>>
>> On 10/11/13 9:18 AM, "motty cruz" <motty.cruz@gmail.com> wrote:
>>
>> >Thank you for your reply, I blow out my installation, started from 
>> >scratch; you mentioned that we don't configure bridge for guest VLAN 
>> >traffic but Cloudstack did not configure it automatically. Also, I 
>> >noticied after installed cloudstack-agent and configure advance zone 
>> >four new interfaces appear vnet0 - vnet3. I don't know what that is.
>> >root@kvm4 network-scripts]# brctl show
>> >bridge name     bridge id               STP enabled     interfaces
>> >cloud0          8000.fe00a9fe025f       no              vnet0
>> >cloudbr0                8000.0015177b6765       no              eth0
>> >                                                        vnet2
>> >cloudbr1                8000.0015177b6764       no              eth1
>> >                                                        vnet1
>> >                                                        vnet3
>> >virbr0          8000.525400643b18       yes             virbr0-nic
>> >
>> >after re-installing Cloudstack-management on the management server 
>> >and Cloudstack-agent on the KVM host configure two bridge cloudbr0 
>> >for public/guest and Cloudbr1 for managemen/storage, now my system 
>> >VMs are running but when trying to download and iso, I get the 
>> >follwoing error
>> "No
>> >route to host",
>> >here is my cloudbr0 bridge for public/guest traffic
>> >[root@kvm4 network-scripts]# less ifcfg-cloudbr0
>> >DEVICE=cloudbr0
>> >ONBOOT=yes
>> >TYPE=Bridge
>> >IPADDR=xxx.xxxx.xxx
>> >GATEWAY=xxxx.xxxx.xxxx.xxx
>> >NETMASK=255.255.255.0
>> >DNS1=8.8.8.8
>> >
>> >base on eth0
>> >DEVICE=eth0
>> >HWADDR=00:15:17:7B:67:65
>> >ONBOOT=yes
>> >BRIDGE=cloudbr0
>> >
>> >Thanks again,
>> >
>> >
>> >
>> >
>> >On Fri, Oct 11, 2013 at 2:20 AM, Sanjeev Neelarapu < 
>> >sanjeev.neelarapu@citrix.com> wrote:
>> >
>> >> Hi,
>> >>
>> >> Please post management server log and agent log from kvm (with 
>> >> debug
>> >> enabled) to find out the issue .
>> >> We don't have to created bridge with guest vlan for guest traffic.
>> >> Cloudstack will configure it automatically on kvm when required.
>> >>
>> >> -Sanjeev
>> >>
>> >> -----Original Message-----
>> >> From: motty cruz [mailto:motty.cruz@gmail.com]
>> >> Sent: Thursday, October 10, 2013 10:50 PM
>> >> To: users@cloudstack.apache.org
>> >> Subject: CS 4.2 Advance Zone System VM won't start
>> >>
>> >> Hi,
>> >> I posted this problem in the past and got no help, so I'm trying 
>> >> my
>> luck
>> >> again I install CS 4.2, configure advance zone for KVM cluster 
>> >>here is my  brctl
>> >> [root@kvm4 network-scripts]# brctl show
>> >> bridge name     bridge id               STP enabled     interfaces
>> >> cloud0          8000.fe00a9fe0212       no              vnet0
>> >> cloudbr0                8000.0015177b6765       no              eth0
>> >>                                                         vnet1
>> >>                                                         vnet3
>> >> cloudbr1                8000.0015177b6764       no              eth1
>> >>                                                         vnet2
>> >> cloudbr99               8000.0015177b6764       no              eth1.99
>> >> virbr0          8000.52540089a4da       yes             virbr0-nic
>> >>
>> >> I'm using inteface eth0 for management
>> >> [root@kvm4 network-scripts]# less ifcfg-eth0
>> >> DEVICE=eth0
>> >> ONBOOT=yes
>> >> BRIDGE=cloudbr0
>> >>
>> >> here is bridge for eth0
>> >> DEVICE=cloudbr0
>> >> ONBOOT=yes
>> >> TYPE=Bridge
>> >> IPADDR=192.168.0.10
>> >> NETMASK=255.255.255.0
>> >> GATEWAY=192.168.0.1
>> >> DNS1=8.8.8.8
>> >>
>> >> I'm using eth1 for public/guest
>> >> [root@kvm4 network-scripts]# less ifcfg-eth1
>> >> DEVICE=eth1
>> >> ONBOOT=yes
>> >> BRIDGE=cloudbr1
>> >>
>> >> here is bridge to public network untag in vlan 1 by default
>> >> DEVICE=cloudbr1
>> >> ONBOOT=yes
>> >> TYPE=Bridge
>> >> IPADDR=98.234.34.208
>> >> NETMASK=255.255.255.0
>> >>
>> >> I created VLAN 99 for guest traffic
>> >> DEVICE=eth1.99
>> >> ONBOOT=yes
>> >> VLAN=yes
>> >> BRIDGE=cloudbr99
>> >>
>> >> DEVICE=cloudbr99
>> >> ONBOOT=yes
>> >> TYPE=Bridge
>> >> IPADDR=10.1.1.2
>> >> NETMASK=255.255.255.0
>> >> DNS1=8.8.8.8
>> >>
>> >> I'm using CLVM for primary storage, I noticed system vms were 
>> >> created
>> >> lvm> lvscan
>> >>   inactive
>> >>'/dev/hitachi-1/c490e01b-4e40-40fb-aa56-fbedd89b86cd'
>> >> [1.95 GiB] inherit
>> >>   inactive
>> >>'/dev/hitachi-1/ec032d27-26a4-467b-a1da-222402eedd60'
>> >> [1.95 GiB] inherit
>> >>   ACTIVE            '/dev/vg_kvm2/lv_root' [189.20 GiB] inherit
>> >>   ACTIVE            '/dev/vg_kvm2/lv_swap' [31.51 GiB] inherit
>> >> lvm>
>> >>
>> >> here is my age.properties file:
>> >> #Storage
>> >> #Thu Oct 10 09:47:57 PDT 2013
>> >> guest.network.device=cloudbr99
>> >> workers=5
>> >> private.network.device=cloudbr0
>> >> port=8250
>> >> resource=com.cloud.hypervisor.kvm.resource.LibvirtComputingResourc
>> >> e
>> >> pod=1
>> >> zone=1
>> >> guid=10d96879-df46-3b97-9428-85e2934e0b95
>> >> public.network.device=cloudbr1
>> >> cluster=1
>> >> local.storage.uuid=7c563a7d-e257-48da-9133-cf5ae8973761
>> >> domr.scripts.dir=scripts/network/domr/kvm
>> >> LibvirtComputingResource.id=1
>> >> host=192.168.0.5
>> >>
>> >>
>> >> but System VMs are not starting, can someone tell me if VLAN are 
>> >>configure  right?
>> >>
>> >> log:
>> >> 2013-10-10 10:17:58,838 DEBUG 
>> >> [network.lb.LBHealthCheckManagerImpl]
>> >> (LBHealthCheck-1:null) LB HealthCheck Manager is running and 
>> >> getting
>> the
>> >> updates from LB providers and updating service status
>> >>
>> >> 2013-10-10 10:18:19,049 DEBUG [cloud.capacity.CapacityManagerImpl]
>> >> (CapacityChecker:null) Found 2 VMs on host 1
>> >> 2013-10-10 10:18:19,060 DEBUG [cloud.capacity.CapacityManagerImpl]
>> >> (CapacityChecker:null) Found 0 VM, not running on host 1
>> >> 2013-10-10 10:18:19,049 DEBUG [cloud.capacity.CapacityManagerImpl]
>> >> (CapacityChecker:null) Found 2 VMs on host 1
>> >> 2013-10-10 10:18:19,060 DEBUG [cloud.capacity.CapacityManagerImpl]
>> >> (CapacityChecker:null) Found 0 VM, not running on host 1
>> >>
>> >>
>> >>
>> >> Thanks in advance!
>> >>
>>
>>
>

Mime
View raw message