cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Abdul Rasool <rasool...@gmail.com>
Subject Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Date Fri, 17 Oct 2014 11:47:19 GMT
Hi Kirk,

Thanks a lot for your support I could able to make it. it is working as
expected....

Thanks Again.

AR

On Fri, Oct 17, 2014 at 2:12 PM, Kirk Kosinski <kirkkosinski@gmail.com>
wrote:

> If you didn't check anything at all when creating the Network Offering
> it is probably not configured correctly.  Look at the default shared
> Network Offering and create a new offering based on that but without the
> things you specifically know you don't want, such as DHCP, DNS, etc..
> If you don't know what the setting is then just set it the same as the
> default offering.  I believe the error you pasted is occurring because
> the offering has Specify IP ranges = no.
>
> Best regards,
> Kirk
>
> On 10/16/2014 10:27 PM, Abdul Rasool wrote:
> > My Network config details are below.
> >
> > 192.168.200.0/24        cloudbr3 --> Management NW
> > 192.168.100.0/24        cloudbr0 --> Guest+Public N/W
> > 192.168.201.0/24        cloudbr4 --> Storage N/W
> > NO IP mention on NIC cloudbr5 --> Guest Additional Network.
> >
> > I am trying to use guest additional network offering without using any
> ACS
> > offering like VR, DNS, DHCP, Firewall etc. I have created a new network
> > offering called Ex-LAN-NO-Offering while creating this I have not
> selected
> > any of the default offering from the list. at the end I have mention this
> > particular interface tags.thatz all.
> >
> > In this physical NIC (cloudbr5) doesn’t have any existing network when I
> > try configuring new network using Ex-LAN-NO-Offering I am getting this
> > error *Network offering with specified id doesn't support adding multiple
> > ip ranges*.
> >
> > Please help me am I doing any thing wrong here .
> >
> > Thanks
> > AR
> >
> > On Fri, Oct 17, 2014 at 5:58 AM, Kirk Kosinski <kirkkosinski@gmail.com>
> > wrote:
> >
> >> Please provide the complete details of the Network Offering you are
> >> trying to use.
> >>
> >> Best regards,
> >> Kirk
> >>
> >> On 10/16/2014 05:36 AM, Abdul Rasool wrote:
> >>> Hi Kirk,
> >>>
> >>> Thanks for your suggestion,
> >>>
> >>> I have tried doing the same mentioning some IPs with service offering
> >> which
> >>> has not selected any of the cloudstack service in the list, & account
> >>> specified.  I get this below error Network offering with specified id
> >>> doesn't support adding multiple ip ranges
> >>>
> >>>
> >>> This I have tried on Admin UI --> Infrastructure --> Zone--> POD-->
> >>> physical NIC --> Guest---> Network --> add guest Network.
> >>>
> >>>
> >>> Please guide me why I am not able to add this new network on ACS.
> >>>
> >>> Regards,
> >>> AR
> >>>
> >>>
> >>> On Thu, Oct 16, 2014 at 2:12 PM, Kirk Kosinski <kirkkosinski@gmail.com
> >
> >>> wrote:
> >>>
> >>>> Hi, Abdul.  In your previous message you wrote:
> >>>>
> >>>>> I want to add additional
> >>>>> physical NIC to VM without mention IPs and service offering from
> >>>>> cloudstack
> >>>>
> >>>> To me this sounds like you want to make changes directly to a VM at
> the
> >>>> hypervisor level, so I was trying to explain that this won't work as
> >>>> CloudStack can and will undo any such changes.  You will need to add
> >>>> every network to CloudStack that you want CloudStack-managed VMs to
> use.
> >>>>  As I explained earlier you may be required to input the IP addresses
> in
> >>>> CloudStack, but that range will not be used if the network offering
> has
> >>>> DHCP disabled; thus you can configure the NIC in the VM OS with any
> >>>> static IP address you want.
> >>>>
> >>>> Best regards,
> >>>> Kirk
> >>>>
> >>>> On 10/14/2014 05:04 AM, Abdul Rasool wrote:
> >>>>> Hi Kirk,
> >>>>>
> >>>>> I think we both are not on the same page, could you please go through
> >> my
> >>>>> below emails and let me know is my question is clear to you. if
so
> >> please
> >>>>> help to configure this scenario.
> >>>>>
> >>>>> Thanks in advance.
> >>>>> AR
> >>>>>
> >>>>> On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <
> >> kirkkosinski@gmail.com>
> >>>>> wrote:
> >>>>>
> >>>>>> Hi, all VM configuration needs to be done in CloudStack, otherwise
> it
> >>>>>> will be undone by CloudStack under various common circumstance
> >> (reboot,
> >>>>>> stop/start, etc.).
> >>>>>>
> >>>>>> Best regards,
> >>>>>> Kirk
> >>>>>>
> >>>>>> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
> >>>>>>> Hi Kirk
> >>>>>>>
> >>>>>>> Thanks for your reply,
> >>>>>>>
> >>>>>>> adding to some more points on the same case I want to add
> additional
> >>>>>>> physical NIC to VM without mention IPs and service offering
from
> >>>>>> cloudstack
> >>>>>>> is that possible ?. in my case I have 1 VM which has public
NIC and
> >>>> need
> >>>>>>> one more additional physical NIC for internal use. on the
WAN side
> >>>> every
> >>>>>>> thing is working as expected in the same VM I would need
to add one
> >>>> more
> >>>>>>> physical NIC which I need to manually configure IPs in different
> >> range
> >>>>>>> apart from the default CIDR.(Eg - connecting to different
network
> >> over
> >>>>>>> MPLS) meaning one guest VM will have two network one towards
to
> >> public
> >>>>>> with
> >>>>>>> default CIDR and other network towards to MPLS on different
IP
> range,
> >>>> is
> >>>>>>> that possible if so could you please assist me on this.
> >>>>>>>
> >>>>>>> Thanks
> >>>>>>> AR
> >>>>>>>
> >>>>>>> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <
> >> kirkkosinski@gmail.com
> >>>>>
> >>>>>>> wrote:
> >>>>>>>
> >>>>>>>> Hi, as I said before you may still be required to input
an IP
> range
> >>>> when
> >>>>>>>> creating the network, but it won't be used if DHCP is
disabled for
> >> the
> >>>>>>>> network.  So just input any IP range when creating the
network and
> >>>> then
> >>>>>>>> configure the desired IP address in the VM.
> >>>>>>>>
> >>>>>>>> Best regards,
> >>>>>>>> Kirk
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
> >>>>>>>>> Hi Kirk
> >>>>>>>>>
> >>>>>>>>> Thanks for your response
> >>>>>>>>> I have tried creating service offering  without
dhcp but while
> >>>> creating
> >>>>>>>>> guest network its forcing me to mention IP range.
My requirement
> >> is
> >>>>>>>> that i
> >>>>>>>>> will get only 1 IP from each branch network that
I have to
> >> configure
> >>>> in
> >>>>>>>>> guest VM directly. In the branch network switch
is created with
> >>>>>> multiple
> >>>>>>>> L2
> >>>>>>>>> vlans. Please guide me how to setup this network.
> >>>>>>>>>
> >>>>>>>>> I hope you have seen my model network diagram which
 i have
> >> uploaded
> >>>> in
> >>>>>>>>> google drive.
> >>>>>>>>>
> >>>>>>>>> Thx in advance
> >>>>>>>>> AR.
> >>>>>>>>>  On 10 Oct 2014 22:42, "Kirk Kosinski" <kirkkosinski@gmail.com>
> >>>> wrote:
> >>>>>>>>>
> >>>>>>>>>> Hi, if you don't want DHCP for your branch office
network you
> need
> >>>> to
> >>>>>>>>>> create a Network Offering without DHCP and select
that offering
> >> when
> >>>>>>>>>> adding the network in CloudStack.  You may still
be required to
> >>>> input
> >>>>>> an
> >>>>>>>>>> IP range when creating the network, but CloudStack
won't be able
> >> to
> >>>>>>>>>> assign the IPs with DHCP disabled.
> >>>>>>>>>>
> >>>>>>>>>> Best regards,
> >>>>>>>>>> Kirk
> >>>>>>>>>>
> >>>>>>>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> >>>>>>>>>>> Hi All,
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> I am new to Cloudstack I would required
your help to achieve my
> >>>>>>>> advanced
> >>>>>>>>>>> networking configuration. right now I am
using CS-4.4.0
> >> management
> >>>>>>>> server
> >>>>>>>>>>> with Mysql DB on it. I have 2 computing
server with multiple
> NICs
> >>>> to
> >>>>>>>> test
> >>>>>>>>>>> my environment. As per the study guide I
could able to test all
> >> the
> >>>>>>>>>>> functionality except my topology point view.
Basically I would
> >> need
> >>>>>> my
> >>>>>>>>>>> guest VM to have 2 Physical NICs one towards
to Internet
> (eth0) &
> >>>> VM
> >>>>>> to
> >>>>>>>>>> VM
> >>>>>>>>>>> communication and other Physical NIC (eth1)
for my branch
> office
> >>>>>>>>>>> connectivity without configuring gateway
on the interface. I
> will
> >>>>>>>>>> manually
> >>>>>>>>>>> add route on the VM. I have tried all the
possibility ways with
> >> my
> >>>>>> poor
> >>>>>>>>>>> knowledge on the CS I could not able to
add guest network
> without
> >>>>>>>>>>> mentioning IP range on the UI also cloudmonkey.
 I want to
> >>>> configure
> >>>>>>>> IPs
> >>>>>>>>>> on
> >>>>>>>>>>> the eth1 nic (Branch network) manually without
getting IPs from
> >>>> DHCP,
> >>>>>>>>>> could
> >>>>>>>>>>> someone please guide me on this.  We are
already running
> similar
> >>>>>> setup
> >>>>>>>> on
> >>>>>>>>>>> VMware I hope this can be done on cloudstack
as well.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Configuration details.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Management Server / computing server is
running on Ubuntu
> detail
> >>>> are
> >>>>>>>>>> below.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Distributor ID: Ubuntu
> >>>>>>>>>>>
> >>>>>>>>>>> Description: Ubuntu 12.04.5 LTS
> >>>>>>>>>>>
> >>>>>>>>>>> Release: 12.04
> >>>>>>>>>>>
> >>>>>>>>>>> Codename: precise
> >>>>>>>>>>>
> >>>>>>>>>>> Virtualization is on = KVM
> >>>>>>>>>>>
> >>>>>>>>>>> Guest VM OS = Windows -7, CentOS
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> I have attached detailed diagram for your
better understanding,
> >>>>>> please
> >>>>>>>>>> help
> >>>>>>>>>>> me to configure my scenario.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Please find this below link for network
diagram.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>
> >>>>>>
> >>>>
> >>
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Thanks in Advance.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Abdul Rasool.
> >>>>>>>>>>>
> >>>>>>>>>>> +91 98865 18767
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>
> >>
> >
>
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message