cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Abdul Rasool <rasool...@gmail.com>
Subject Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Date Fri, 10 Oct 2014 18:41:17 GMT
Hi Kirk

Thanks for your response
I have tried creating service offering  without dhcp but while creating
guest network its forcing me to mention IP range. My requirement  is that i
will get only 1 IP from each branch network that I have to configure in
guest VM directly. In the branch network switch is created with multiple L2
vlans. Please guide me how to setup this network.

I hope you have seen my model network diagram which  i have uploaded in
google drive.

Thx in advance
AR.
 On 10 Oct 2014 22:42, "Kirk Kosinski" <kirkkosinski@gmail.com> wrote:

> Hi, if you don't want DHCP for your branch office network you need to
> create a Network Offering without DHCP and select that offering when
> adding the network in CloudStack.  You may still be required to input an
> IP range when creating the network, but CloudStack won't be able to
> assign the IPs with DHCP disabled.
>
> Best regards,
> Kirk
>
> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> > Hi All,
> >
> >
> >
> > I am new to Cloudstack I would required your help to achieve my advanced
> > networking configuration. right now I am using CS-4.4.0 management server
> > with Mysql DB on it. I have 2 computing server with multiple NICs to test
> > my environment. As per the study guide I could able to test all the
> > functionality except my topology point view. Basically I would need my
> > guest VM to have 2 Physical NICs one towards to Internet (eth0) & VM to
> VM
> > communication and other Physical NIC (eth1) for my branch office
> > connectivity without configuring gateway on the interface. I will
> manually
> > add route on the VM. I have tried all the possibility ways with my poor
> > knowledge on the CS I could not able to add guest network without
> > mentioning IP range on the UI also cloudmonkey.  I want to configure IPs
> on
> > the eth1 nic (Branch network) manually without getting IPs from DHCP,
> could
> > someone please guide me on this.  We are already running similar setup on
> > VMware I hope this can be done on cloudstack as well.
> >
> >
> >
> > Configuration details.
> >
> >
> >
> > Management Server / computing server is running on Ubuntu detail are
> below.
> >
> >
> >
> > Distributor ID: Ubuntu
> >
> > Description: Ubuntu 12.04.5 LTS
> >
> > Release: 12.04
> >
> > Codename: precise
> >
> > Virtualization is on = KVM
> >
> > Guest VM OS = Windows -7, CentOS
> >
> >
> >
> > I have attached detailed diagram for your better understanding, please
> help
> > me to configure my scenario.
> >
> >
> > Please find this below link for network diagram.
> >
> >
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
> >
> >
> >
> > Thanks in Advance.
> >
> >
> >
> > Abdul Rasool.
> >
> > +91 98865 18767
> >
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message