cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Abdul Rasool <rasool...@gmail.com>
Subject Re: Fwd: Guest VM with Multiple Networks on single VR (Virtual Router)
Date Thu, 16 Oct 2014 12:36:43 GMT
Hi Kirk,

Thanks for your suggestion,

I have tried doing the same mentioning some IPs with service offering which
has not selected any of the cloudstack service in the list, & account
specified.  I get this below error Network offering with specified id
doesn't support adding multiple ip ranges


This I have tried on Admin UI --> Infrastructure --> Zone--> POD-->
physical NIC --> Guest---> Network --> add guest Network.


Please guide me why I am not able to add this new network on ACS.

Regards,
AR


On Thu, Oct 16, 2014 at 2:12 PM, Kirk Kosinski <kirkkosinski@gmail.com>
wrote:

> Hi, Abdul.  In your previous message you wrote:
>
> > I want to add additional
> > physical NIC to VM without mention IPs and service offering from
> > cloudstack
>
> To me this sounds like you want to make changes directly to a VM at the
> hypervisor level, so I was trying to explain that this won't work as
> CloudStack can and will undo any such changes.  You will need to add
> every network to CloudStack that you want CloudStack-managed VMs to use.
>  As I explained earlier you may be required to input the IP addresses in
> CloudStack, but that range will not be used if the network offering has
> DHCP disabled; thus you can configure the NIC in the VM OS with any
> static IP address you want.
>
> Best regards,
> Kirk
>
> On 10/14/2014 05:04 AM, Abdul Rasool wrote:
> > Hi Kirk,
> >
> > I think we both are not on the same page, could you please go through my
> > below emails and let me know is my question is clear to you. if so please
> > help to configure this scenario.
> >
> > Thanks in advance.
> > AR
> >
> > On Tue, Oct 14, 2014 at 12:56 AM, Kirk Kosinski <kirkkosinski@gmail.com>
> > wrote:
> >
> >> Hi, all VM configuration needs to be done in CloudStack, otherwise it
> >> will be undone by CloudStack under various common circumstance (reboot,
> >> stop/start, etc.).
> >>
> >> Best regards,
> >> Kirk
> >>
> >> On 10/13/2014 04:03 AM, Abdul Rasool wrote:
> >>> Hi Kirk
> >>>
> >>> Thanks for your reply,
> >>>
> >>> adding to some more points on the same case I want to add additional
> >>> physical NIC to VM without mention IPs and service offering from
> >> cloudstack
> >>> is that possible ?. in my case I have 1 VM which has public NIC and
> need
> >>> one more additional physical NIC for internal use. on the WAN side
> every
> >>> thing is working as expected in the same VM I would need to add one
> more
> >>> physical NIC which I need to manually configure IPs in different range
> >>> apart from the default CIDR.(Eg - connecting to different network over
> >>> MPLS) meaning one guest VM will have two network one towards to public
> >> with
> >>> default CIDR and other network towards to MPLS on different IP range,
> is
> >>> that possible if so could you please assist me on this.
> >>>
> >>> Thanks
> >>> AR
> >>>
> >>> On Sat, Oct 11, 2014 at 9:46 AM, Kirk Kosinski <kirkkosinski@gmail.com
> >
> >>> wrote:
> >>>
> >>>> Hi, as I said before you may still be required to input an IP range
> when
> >>>> creating the network, but it won't be used if DHCP is disabled for the
> >>>> network.  So just input any IP range when creating the network and
> then
> >>>> configure the desired IP address in the VM.
> >>>>
> >>>> Best regards,
> >>>> Kirk
> >>>>
> >>>>
> >>>> On 10/10/2014 11:41 AM, Abdul Rasool wrote:
> >>>>> Hi Kirk
> >>>>>
> >>>>> Thanks for your response
> >>>>> I have tried creating service offering  without dhcp but while
> creating
> >>>>> guest network its forcing me to mention IP range. My requirement
 is
> >>>> that i
> >>>>> will get only 1 IP from each branch network that I have to configure
> in
> >>>>> guest VM directly. In the branch network switch is created with
> >> multiple
> >>>> L2
> >>>>> vlans. Please guide me how to setup this network.
> >>>>>
> >>>>> I hope you have seen my model network diagram which  i have uploaded
> in
> >>>>> google drive.
> >>>>>
> >>>>> Thx in advance
> >>>>> AR.
> >>>>>  On 10 Oct 2014 22:42, "Kirk Kosinski" <kirkkosinski@gmail.com>
> wrote:
> >>>>>
> >>>>>> Hi, if you don't want DHCP for your branch office network you
need
> to
> >>>>>> create a Network Offering without DHCP and select that offering
when
> >>>>>> adding the network in CloudStack.  You may still be required
to
> input
> >> an
> >>>>>> IP range when creating the network, but CloudStack won't be
able to
> >>>>>> assign the IPs with DHCP disabled.
> >>>>>>
> >>>>>> Best regards,
> >>>>>> Kirk
> >>>>>>
> >>>>>> On 10/10/2014 05:06 AM, Abdul Rasool wrote:
> >>>>>>> Hi All,
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> I am new to Cloudstack I would required your help to achieve
my
> >>>> advanced
> >>>>>>> networking configuration. right now I am using CS-4.4.0
management
> >>>> server
> >>>>>>> with Mysql DB on it. I have 2 computing server with multiple
NICs
> to
> >>>> test
> >>>>>>> my environment. As per the study guide I could able to test
all the
> >>>>>>> functionality except my topology point view. Basically I
would need
> >> my
> >>>>>>> guest VM to have 2 Physical NICs one towards to Internet
(eth0) &
> VM
> >> to
> >>>>>> VM
> >>>>>>> communication and other Physical NIC (eth1) for my branch
office
> >>>>>>> connectivity without configuring gateway on the interface.
I will
> >>>>>> manually
> >>>>>>> add route on the VM. I have tried all the possibility ways
with my
> >> poor
> >>>>>>> knowledge on the CS I could not able to add guest network
without
> >>>>>>> mentioning IP range on the UI also cloudmonkey.  I want
to
> configure
> >>>> IPs
> >>>>>> on
> >>>>>>> the eth1 nic (Branch network) manually without getting IPs
from
> DHCP,
> >>>>>> could
> >>>>>>> someone please guide me on this.  We are already running
similar
> >> setup
> >>>> on
> >>>>>>> VMware I hope this can be done on cloudstack as well.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Configuration details.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Management Server / computing server is running on Ubuntu
detail
> are
> >>>>>> below.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Distributor ID: Ubuntu
> >>>>>>>
> >>>>>>> Description: Ubuntu 12.04.5 LTS
> >>>>>>>
> >>>>>>> Release: 12.04
> >>>>>>>
> >>>>>>> Codename: precise
> >>>>>>>
> >>>>>>> Virtualization is on = KVM
> >>>>>>>
> >>>>>>> Guest VM OS = Windows -7, CentOS
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> I have attached detailed diagram for your better understanding,
> >> please
> >>>>>> help
> >>>>>>> me to configure my scenario.
> >>>>>>>
> >>>>>>>
> >>>>>>> Please find this below link for network diagram.
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>
> >>
> https://drive.google.com/file/d/0B_WdtmbCAFl4bW91d1VPajFzdkk/view?usp=sharing
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Thanks in Advance.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Abdul Rasool.
> >>>>>>>
> >>>>>>> +91 98865 18767
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>
> >>
> >
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message