hama-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From developer wang <developer...@gmail.com>
Subject Re: Some question about hama-0.6.3
Date Fri, 28 Feb 2014 06:59:31 GMT
For mvn -U install package, error log is : install-package-log

For mvn -U install package -Dmaven.test.skip=true, error log is :
test-skip-error-log


2014-02-28 14:35 GMT+08:00 Edward J. Yoon <edwardyoon@apache.org>:

> Can you attach your failure log showing?
>
> On Fri, Feb 28, 2014 at 3:14 PM, developer wang <developer.pw@gmail.com>
> wrote:
> > Actually I tried "mvn install package" with skipping test, but then it
> could
> > not pass the test in the compilation of core and it could not continue!
> >
> >
> > 2014-02-28 11:54 GMT+08:00 Edward J. Yoon <edwardyoon@apache.org>:
> >
> >> Please try to build without -Dmaven.test.skip=true option.
> >>
> >> > Problem 2:
> >> > Compared to 0.6.0, you use VerticesInfo to store the vertices, and in
> >> > the
> >> > DiskVerticesInfo, they serialize and deserialize every vertices into
> the
> >> > local file system.
> >> > Is this used to provides fault tolerance (the checkpoint part)? Or is
> it
> >> > designed for other purposes?
> >>
> >> It was a part of effort to reduce the memory usage[1]. In the TRUNK
> >> version, we've optimized memory consumption, by serializing vertex
> >> objects in memory, without big degradation of performance. As I
> >> mentioned before, the vertices doesn't occupy large memory.
> >>
> >> > If it is designed for checkpoint part in fault tolerance, why it write
> >> > to
> >> > local disk but not HDFS?
> >> > In my mind, if a machine crashed, if the fault tolerance mechanism
> >> > depends
> >> > on the manual reboot or repair of the crashed machine, the potential
> >> > lengthy
> >> > recovery time is intolerant.
> >> > Do you agree with me?
> >> > Or maybe you have other trade-off?
> >>
> >> User will be able to set the checkpointing interval. Then, the content
> >> of memory buffers need to be written to HDFS only when checkpoint
> >> occurs.
> >>
> >> 1.
> >>
> https://issues.apache.org/jira/browse/HAMA-704?focusedCommentId=13580454&page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel#comment-13580454
> >>
> >> On Fri, Feb 28, 2014 at 11:55 AM, developer wang <
> developer.pw@gmail.com>
> >> wrote:
> >> > Thank you very much for the previous useful reply.
> >> > But I encounters with other problems.
> >> >
> >> >
> -----------------------------------------------------------------------------------------------------------------------------------------------
> >> > 1 Problem
> >> > I tried the trunk (with the commit-point in git:
> >> > 1b3f1744a33a29686c2eafe7764bb3640938fcc8), but it can not pass the
> >> > compilation phase (I use this command:  mvn install package
> >> > -Dmaven.test.skip=true) it complained this:
> >> >
> >> > [INFO]
> >> > [INFO]
> >> >
> ------------------------------------------------------------------------
> >> > [INFO] Building graph 0.7.0-SNAPSHOT
> >> > [INFO]
> >> >
> ------------------------------------------------------------------------
> >> > [INFO]
> >> >
> ------------------------------------------------------------------------
> >> > [INFO] Reactor Summary:
> >> > [INFO]
> >> > [INFO] Apache Hama parent POM ............................ SUCCESS
> >> > [2.960s]
> >> > [INFO] pipes ............................................. SUCCESS
> >> > [10.033s]
> >> > [INFO] commons ........................................... SUCCESS
> >> > [6.664s]
> >> > [INFO] core .............................................. SUCCESS
> >> > [23.909s]
> >> > [INFO] graph ............................................. FAILURE
> >> > [0.048s]
> >> > [INFO] machine learning .................................. SKIPPED
> >> > [INFO] examples .......................................... SKIPPED
> >> > [INFO] hama-dist ......................................... SKIPPED
> >> > [INFO]
> >> >
> ------------------------------------------------------------------------
> >> > [INFO] BUILD FAILURE
> >> > [INFO]
> >> >
> ------------------------------------------------------------------------
> >> > [INFO] Total time: 44.102s
> >> > [INFO] Finished at: Fri Feb 28 10:06:23 HKT 2014
> >> > [INFO] Final Memory: 50M/384M
> >> > [INFO]
> >> >
> ------------------------------------------------------------------------
> >> > [ERROR] Failed to execute goal on project hama-graph: Could not
> resolve
> >> > dependencies for project
> org.apache.hama:hama-graph:jar:0.7.0-SNAPSHOT:
> >> > Failure to find org.apache.hama:hama-core:jar:tests:0.7.0-SNAPSHOT in
> >> > https://repository.cloudera.com/artifactory/cloudera-repos was
> cached in
> >> > the
> >> > local repository, resolution will not be reattempted until the update
> >> > interval of cloudera-repo has elapsed or updates are forced -> [Help
> 1]
> >> >
> >> > Does this mean you forget upload some jars to the maven remote
> >> > repository?
> >> > (I can the above command to compile 0.6.3)
> >> >
> >> > I surveyed about this question on the Internet, some says I should run
> >> > maven
> >> > with -U.
> >> > So I tried to this command:  mvn -U compile
> >> > but it still fails. almost the same error:
> >> > [ERROR] Failed to execute goal
> >> > org.apache.maven.plugins:maven-remote-resources-plugin:1.1:process
> >> > (default)
> >> > on project hama-graph: Failed to resolve dependencies for one or more
> >> > projects in the reactor. Reason: Missing:
> >> > [ERROR] ----------
> >> > [ERROR] 1) org.apache.hama:hama-core:test-jar:tests:0.7.0-SNAPSHOT
> >> > [ERROR]
> >> > [ERROR] Try downloading the file manually from the project website.
> >> > [ERROR]
> >> > [ERROR] Then, install it using the command:
> >> > [ERROR] mvn install:install-file -DgroupId=org.apache.hama
> >> > -DartifactId=hama-core -Dversion=0.7.0-SNAPSHOT -Dclassifier=tests
> >> > -Dpackaging=test-jar -Dfile=/path/to/file
> >> > [ERROR]
> >> > [ERROR] Alternatively, if you host your own repository you can deploy
> >> > the
> >> > file there:
> >> > [ERROR] mvn deploy:deploy-file -DgroupId=org.apache.hama
> >> > -DartifactId=hama-core -Dversion=0.7.0-SNAPSHOT -Dclassifier=tests
> >> > -Dpackaging=test-jar -Dfile=/path/to/file -Durl=[url]
> >> > -DrepositoryId=[id]
> >> > [ERROR]
> >> > [ERROR] Path to dependency:
> >> > [ERROR] 1) org.apache.hama:hama-graph:jar:0.7.0-SNAPSHOT
> >> > [ERROR] 2) org.apache.hama:hama-core:test-jar:tests:0.7.0-SNAPSHOT
> >> > [ERROR]
> >> > [ERROR] ----------
> >> > [ERROR] 1 required artifact is missing.
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> -----------------------------------------------------------------------------------------------------------------------------------------------
> >> >
> >> > Problem 2:
> >> > Compared to 0.6.0, you use VerticesInfo to store the vertices, and in
> >> > the
> >> > DiskVerticesInfo, they serialize and deserialize every vertices into
> the
> >> > local file system.
> >> > Is this used to provides fault tolerance (the checkpoint part)? Or is
> it
> >> > designed for other purposes?
> >> >
> >> > If it is designed for checkpoint part in fault tolerance, why it write
> >> > to
> >> > local disk but not HDFS?
> >> > In my mind, if a machine crashed, if the fault tolerance mechanism
> >> > depends
> >> > on the manual reboot or repair of the crashed machine, the potential
> >> > lengthy
> >> > recovery time is intolerant.
> >> > Do you agree with me?
> >> > Or maybe you have other trade-off?
> >> >
> >> >
> >> >
> >> > 2014-02-28 8:07 GMT+08:00 Edward J. Yoon <edwardyoon@apache.org>:
> >> >
> >> >> In 0.6.3, you can use only ListVerticesInfo. Please use the TRUNK if
> >> >> you
> >> >> want.
> >> >>
> >> >> And, vertices doesn't occupy large memory. Please use
> ListVerticesInfo.
> >> >>
> >> >> FT is not supported yet.
> >> >>
> >> >> On Thu, Feb 27, 2014 at 10:06 PM, developer wang
> >> >> <developer.pw@gmail.com>
> >> >> wrote:
> >> >> > Hi, all.
> >> >> >   Thank you for your detailed reply.
> >> >> >
> >> >> >   In the previous test, I used a incomplete graph to run PageRank,
> >> >> > then
> >> >> > I
> >> >> > got this error:
> >> >> >   java.lang.IllegalArgumentException: Messages must never be behind
> >> >> > the
> >> >> > vertex in ID! Current Message ID:
> >> >> >
> >> >> >   With your detailed reply, I knew it was because some vertices
> tried
> >> >> > to
> >> >> > send messages to dangling nodes (Actually 0.6.0 can handle this
by
> >> >> > adding a
> >> >> > repair phase). Then I fixed this by adding dangling nodes
> explicitly
> >> >> > with a
> >> >> > line which only contains a vertex id.
> >> >> >
> >> >> >   After this, I could run the PageRank (in the attachment) with
the
> >> >> > ListVerticesInfo.
> >> >> >
> >> >> >   But if I use DiskVerticesInfo instead of DiskVerticesInfo by
> this:
> >> >> >   pageJob.set("hama.graph.vertices.info",
> >> >> > "org.apache.hama.graph.DiskVerticesInfo");
> >> >> >
> >> >> >   I will still get the below error:
> >> >> >  java.lang.IllegalArgumentException: Messages must never be behind
> >> >> > the
> >> >> > vertex in ID! Current Message ID:
> >> >> >
> >> >> >  What's the problem?
> >> >> >  Do I use DiskVerticesInfo correctly?
> >> >> >
> >> >> >  Or if I want run my application with fault tolerance, what should
> I
> >> >> > do?
> >> >> >
> >> >> >  Thank you very much.
> >> >> >
> >> >> >
> >> >> >
> >> >> > 2014-02-26 18:27 GMT+08:00 Edward J. Yoon <edwardyoon@apache.org>:
> >> >> >
> >> >> >> > Could you answer this question:
> >> >> >> > I found during the loading,  peers would not exchange
vertices
> >> >> >> > with
> >> >> >> > each
> >> >> >> > other as hama 0.6.0 did.
> >> >> >> > So how does hama 0.6.3 solve the problem below: a peer
load a
> >> >> >> > vertex
> >> >> >> > which
> >> >> >> > is belong to another peer? (for example, suppose 3 peers
for
> this
> >> >> >> > task
> >> >> >> > and
> >> >> >> > the partitoner is Hash, peer #1 loads vertex 2, in 0.6.3,
peer
> #2
> >> >> >> > did
> >> >> >> > not
> >> >> >> > send vertex 2 to peer #2)
> >> >> >>
> >> >> >> Instead of network communication, 0.6.3 uses file communication
> for
> >> >> >> input data partitioning. Please see
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >>
> http://svn.apache.org/repos/asf/hama/trunk/core/src/main/java/org/apache/hama/bsp/PartitioningRunner.java
> >> >> >>
> >> >> >> On Wed, Feb 26, 2014 at 6:03 PM, developer wang
> >> >> >> <developer.pw@gmail.com>
> >> >> >> wrote:
> >> >> >> > Actually I comment the set statement
> >> >> >> >     //pageJob.set("hama.graph.self.ref", "true");
> >> >> >> >
> >> >> >> > and In GraphJobRunner:
> >> >> >> >     final boolean selfReference =
> >> >> >> > conf.getBoolean("hama.graph.self.ref",
> >> >> >> > false);
> >> >> >> >
> >> >> >> > And I will explicitly set hama.graph.self.ref to false,
and use
> a
> >> >> >> > complete
> >> >> >> > graph to have a try again.
> >> >> >> >
> >> >> >> >
> >> >> >> > Could you answer this question:
> >> >> >> > I found during the loading,  peers would not exchange
vertices
> >> >> >> > with
> >> >> >> > each
> >> >> >> > other as hama 0.6.0 did.
> >> >> >> > So how does hama 0.6.3 solve the problem below: a peer
load a
> >> >> >> > vertex
> >> >> >> > which
> >> >> >> > is belong to another peer? (for example, suppose 3 peers
for
> this
> >> >> >> > task
> >> >> >> > and
> >> >> >> > the partitoner is Hash, peer #1 loads vertex 2, in 0.6.3,
peer
> #2
> >> >> >> > did
> >> >> >> > not
> >> >> >> > send vertex 2 to peer #2)
> >> >> >> >
> >> >> >> > or I have some misunderstanding about hama 0.6.3 or above?
(In
> the
> >> >> >> > last
> >> >> >> > years, I used 0.6.0 to do the daily job)
> >> >> >> >
> >> >> >> >
> >> >> >> >
> >> >> >> > 2014-02-26 16:48 GMT+08:00 Edward J. Yoon <
> edwardyoon@apache.org>:
> >> >> >> >
> >> >> >> >> The background is described here:
> >> >> >> >> https://issues.apache.org/jira/browse/HAMA-758
> >> >> >> >>
> >> >> >> >> On Wed, Feb 26, 2014 at 5:38 PM, Edward J. Yoon
> >> >> >> >> <edwardyoon@apache.org>
> >> >> >> >> wrote:
> >> >> >> >> > Oh, please try after set "hama.check.missing.vertex"
to false
> >> >> >> >> > in
> >> >> >> >> > job
> >> >> >> >> > configuration.
> >> >> >> >> >
> >> >> >> >> > On Wed, Feb 26, 2014 at 5:14 PM, developer wang
> >> >> >> >> > <developer.pw@gmail.com>
> >> >> >> >> > wrote:
> >> >> >> >> >> Thank you very much.
> >> >> >> >> >>
> >> >> >> >> >> Since I think the framework should not decide
whether the
> >> >> >> >> >> graph
> >> >> >> >> >> should
> >> >> >> >> >> self-reference, so I disable this config.
(Actually when I
> >> >> >> >> >> used
> >> >> >> >> >> 0.6.0,
> >> >> >> >> >> I
> >> >> >> >> >> also disabled this config)
> >> >> >> >> >>
> >> >> >> >> >> Since I use my PC to test whether my application
works, I
> use
> >> >> >> >> >> a
> >> >> >> >> >> small
> >> >> >> >> >> graph.
> >> >> >> >> >> (It does have a lot of dangling node)
> >> >> >> >> >>
> >> >> >> >> >> The dataset and the PageRank is attached.
> >> >> >> >> >>
> >> >> >> >> >> Thank you very much.
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >> 2014-02-26 16:04 GMT+08:00 Edward J. Yoon
> >> >> >> >> >> <edwardyoon@apache.org>:
> >> >> >> >> >>
> >> >> >> >> >>> Hi Wang,
> >> >> >> >> >>>
> >> >> >> >> >>> Can you send me your input data so that
I can debug?
> >> >> >> >> >>>
> >> >> >> >> >>> On Wed, Feb 26, 2014 at 4:55 PM, developer
wang
> >> >> >> >> >>> <developer.pw@gmail.com>
> >> >> >> >> >>> wrote:
> >> >> >> >> >>> > Firstly, thank you very much for
reply.
> >> >> >> >> >>> >
> >> >> >> >> >>> > But in the log, I found "14/02/25
16:45:00 INFO
> >> >> >> >> >>> > graph.GraphJobRunner:
> >> >> >> >> >>> > 2918
> >> >> >> >> >>> > vertices are loaded into localhost:60340
"
> >> >> >> >> >>> > So it had finished the loading
phase. is this true?
> >> >> >> >> >>> >
> >> >> >> >> >>> > Another problem is that:
> >> >> >> >> >>> > I found during the loading,  peers
would not exchange
> >> >> >> >> >>> > vertices
> >> >> >> >> >>> > with
> >> >> >> >> >>> > each
> >> >> >> >> >>> > other as hama 0.6.0 did.
> >> >> >> >> >>> > So how does hama 0.6.3 solve the
problem below: a peer
> load
> >> >> >> >> >>> > a
> >> >> >> >> >>> > vertex
> >> >> >> >> >>> > which
> >> >> >> >> >>> > is belong to another peer? (for
example, suppose 3 peers
> >> >> >> >> >>> > for
> >> >> >> >> >>> > this
> >> >> >> >> >>> > task
> >> >> >> >> >>> > and
> >> >> >> >> >>> > the partitoner is Hash, peer #1
loads vertex 2, in 0.6.3,
> >> >> >> >> >>> > peer
> >> >> >> >> >>> > #2
> >> >> >> >> >>> > did
> >> >> >> >> >>> > not
> >> >> >> >> >>> > send vertex 2 to peer #2)
> >> >> >> >> >>> >
> >> >> >> >> >>> >
> >> >> >> >> >>> > 2014-02-26 15:46 GMT+08:00 Edward
J. Yoon
> >> >> >> >> >>> > <edwardyoon@apache.org>:
> >> >> >> >> >>> >
> >> >> >> >> >>> >> > I tried PageRank with
a small input of my own.
> >> >> >> >> >>> >>
> >> >> >> >> >>> >> Hi Wang,
> >> >> >> >> >>> >>
> >> >> >> >> >>> >> This error often occurs when
there is a record
> conversion
> >> >> >> >> >>> >> error.
> >> >> >> >> >>> >> So,
> >> >> >> >> >>> >> you should check whether the
vertex reader works
> >> >> >> >> >>> >> correctly.
> >> >> >> >> >>> >>
> >> >> >> >> >>> >> And, I highly recommend you
to use latest TRUNK
> version[1]
> >> >> >> >> >>> >> as
> >> >> >> >> >>> >> possible.
> >> >> >> >> >>> >>
> >> >> >> >> >>> >> 1.
> >> >> >> >> >>> >>
> >> >> >> >> >>> >>
> >> >> >> >> >>> >>
> >> >> >> >> >>> >>
> >> >> >> >> >>> >>
> >> >> >> >> >>> >>
> http://wiki.apache.org/hama/GettingStarted#Build_latest_version_from_source
> >> >> >> >> >>> >>
> >> >> >> >> >>> >> Thank you.
> >> >> >> >> >>> >>
> >> >> >> >> >>> >> On Wed, Feb 26, 2014 at 1:44
PM, developer wang
> >> >> >> >> >>> >> <developer.pw@gmail.com>
> >> >> >> >> >>> >> wrote:
> >> >> >> >> >>> >> > Hi, all.
> >> >> >> >> >>> >> >    I am Peng Wang, a student
trying to use and learn
> >> >> >> >> >>> >> > Hama.
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >    I cloned the develop
git repository of Hama.
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >    I firstly tried the
newest version in the tag, the
> >> >> >> >> >>> >> > tag:
> >> >> >> >> >>> >> > 0.7.0-SNAPSHOT.
> >> >> >> >> >>> >> > commit bef419747695d15de8a1087f44028ee40571b5f9
> >> >> >> >> >>> >> > Author: Edward J. Yoon
<edwardyoon@apache.org>
> >> >> >> >> >>> >> > Date:   Fri Mar 29 00:44:59
2013 +0000
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >     [maven-release-plugin]
 copy for tag
> 0.7.0-SNAPSHOT
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >     git-svn-id:
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> https://svn.apache.org/repos/asf/hama/tags/0.7.0-SNAPSHOT@1462366
> >> >> >> >> >>> >> > 13f79535-47bb-0310-9956-ffa450edef68
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >   But the tag: 0.6.3-RC3
> >> >> >> >> >>> >> > commit c9526b1272c83d641332667ce5d81d7ccc94be06
> >> >> >> >> >>> >> > Author: Edward J. Yoon
<edwardyoon@apache.org>
> >> >> >> >> >>> >> > Date:   Sun Oct 6 08:27:00
2013 +0000
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >     [maven-release-plugin]
 copy for tag 0.6.3-RC3
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >     git-svn-id:
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> https://svn.apache.org/repos/asf/hama/tags/0.6.3-RC3@1529594
> >> >> >> >> >>> >> > 13f79535-47bb-0310-9956-ffa450edef68
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >    From the commit log,
0.7.0-SNAPSHOT is earlier than
> >> >> >> >> >>> >> > 0.6.3-RC3,
> >> >> >> >> >>> >> >    So I used 0.6.3-RC3
instead of 0.7.0-SNAPSHOT (but
> on
> >> >> >> >> >>> >> > the
> >> >> >> >> >>> >> > website
> >> >> >> >> >>> >> > of
> >> >> >> >> >>> >> > hama, 0.7.0-SNAPSHOT is
the newest version)
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >    Then I deployed Hama
with the Pseudo Distributed
> Mode
> >> >> >> >> >>> >> > on
> >> >> >> >> >>> >> > my
> >> >> >> >> >>> >> > desktop
> >> >> >> >> >>> >> > with
> >> >> >> >> >>> >> > 3 task runners.
> >> >> >> >> >>> >> >    I tried PageRank with
a small input of my own.
> >> >> >> >> >>> >> >    But it failes. And
its log is:
> >> >> >> >> >>> >> > java.lang.IllegalArgumentException:
Messages must
> never
> >> >> >> >> >>> >> > be
> >> >> >> >> >>> >> > behind
> >> >> >> >> >>> >> > the
> >> >> >> >> >>> >> > vertex
> >> >> >> >> >>> >> > in ID! Current Message
ID: 100128 vs. 1004
> >> >> >> >> >>> >> >         at
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> org.apache.hama.graph.GraphJobRunner.iterate(GraphJobRunner.java:306)
> >> >> >> >> >>> >> >         at
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> org.apache.hama.graph.GraphJobRunner.doSuperstep(GraphJobRunner.java:254)
> >> >> >> >> >>> >> >         at
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> org.apache.hama.graph.GraphJobRunner.bsp(GraphJobRunner.java:145)
> >> >> >> >> >>> >> >         at
> >> >> >> >> >>> >> > org.apache.hama.bsp.BSPTask.runBSP(BSPTask.java:177)
> >> >> >> >> >>> >> >         at
> >> >> >> >> >>> >> > org.apache.hama.bsp.BSPTask.run(BSPTask.java:146)
> >> >> >> >> >>> >> >         at
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> org.apache.hama.bsp.GroomServer$BSPPeerChild.main(GroomServer.java:1246)
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >    Could you tell me what
is the problem in my
> >> >> >> >> >>> >> > situation?
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >    I check whether hama
had finished the loading
> phase,
> >> >> >> >> >>> >> > and
> >> >> >> >> >>> >> > I
> >> >> >> >> >>> >> > found
> >> >> >> >> >>> >> > "14/02/25 16:45:00 INFO
graph.GraphJobRunner: 2918
> >> >> >> >> >>> >> > vertices
> >> >> >> >> >>> >> > are
> >> >> >> >> >>> >> > loaded
> >> >> >> >> >>> >> > into
> >> >> >> >> >>> >> > localhost:60340 "in the
log.
> >> >> >> >> >>> >> >    So it had finished
the loading phase.
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >    After this, I read
the source code, and I found
> >> >> >> >> >>> >> > during
> >> >> >> >> >>> >> > the
> >> >> >> >> >>> >> > loading,
> >> >> >> >> >>> >> > peers would not exchange
vertices with each other as
> >> >> >> >> >>> >> > hama
> >> >> >> >> >>> >> > 0.5.0
> >> >> >> >> >>> >> > did.
> >> >> >> >> >>> >> >    So how does hama 0.6.3
solve the problem below: a
> >> >> >> >> >>> >> > peer
> >> >> >> >> >>> >> > load
> >> >> >> >> >>> >> > a
> >> >> >> >> >>> >> > vertex
> >> >> >> >> >>> >> > which is belong to another
peer?
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >    Could you tell which
branch or tag is a stable
> >> >> >> >> >>> >> > version?
> >> >> >> >> >>> >> >    And does it support
fault tolerance for graph
> >> >> >> >> >>> >> > algorithms?
> >> >> >> >> >>> >> > and
> >> >> >> >> >>> >> > how
> >> >> >> >> >>> >> > can I
> >> >> >> >> >>> >> > get it?
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >> >
> >> >> >> >> >>> >>
> >> >> >> >> >>> >>
> >> >> >> >> >>> >>
> >> >> >> >> >>> >> --
> >> >> >> >> >>> >> Edward J. Yoon (@eddieyoon)
> >> >> >> >> >>> >> Chief Executive Officer
> >> >> >> >> >>> >> DataSayer, Inc.
> >> >> >> >> >>> >
> >> >> >> >> >>> >
> >> >> >> >> >>>
> >> >> >> >> >>>
> >> >> >> >> >>>
> >> >> >> >> >>> --
> >> >> >> >> >>> Edward J. Yoon (@eddieyoon)
> >> >> >> >> >>> Chief Executive Officer
> >> >> >> >> >>> DataSayer, Inc.
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > --
> >> >> >> >> > Edward J. Yoon (@eddieyoon)
> >> >> >> >> > Chief Executive Officer
> >> >> >> >> > DataSayer, Inc.
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> --
> >> >> >> >> Edward J. Yoon (@eddieyoon)
> >> >> >> >> Chief Executive Officer
> >> >> >> >> DataSayer, Inc.
> >> >> >> >
> >> >> >> >
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> --
> >> >> >> Edward J. Yoon (@eddieyoon)
> >> >> >> Chief Executive Officer
> >> >> >> DataSayer, Inc.
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Edward J. Yoon (@eddieyoon)
> >> >> Chief Executive Officer
> >> >> DataSayer, Inc.
> >> >
> >> >
> >>
> >>
> >>
> >> --
> >> Edward J. Yoon (@eddieyoon)
> >> Chief Executive Officer
> >> DataSayer, Inc.
> >
> >
>
>
>
> --
> Edward J. Yoon (@eddieyoon)
> Chief Executive Officer
> DataSayer, Inc.
>

Mime
  • Unnamed multipart/mixed (inline, None, 0 bytes)
View raw message