plc4x-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From venki hadoop <hadoopons...@gmail.com>
Subject Re: Exploring Plc4x
Date Wed, 27 May 2020 04:41:38 GMT
Thanks Cesar, will do the same. Not sure some one already tested Modbus
driver to retrieve holding register data, if some one did plz let us know
about this issue.        Regards,


On Wednesday, May 27, 2020, Cesar Garcia <cesar.garcia@ceos.com.ve> wrote:

> Ok,
>
> For tomorrow I will take the time to test the new version and I will take a
> step by step.
>
> Best regards,
>
> El mar., 26 may. 2020 a las 23:42, venki hadoop (<hadooponsite@gmail.com>)
> escribió:
>
> > Sure Cesar,
> >                     was unable to attach my program due to size
> > restrictions. But 1st am testing to retrieve holding resgister variable
> > locally, then will in corporate into my logstash plugin I already
> > implemented for OPC ua server signal simulator. Please find imp code:
> > Builder.addItem("value","registerholder:34").
> > Plcreadrequest req= builder.build().
> >   plcreadresponse res=req.execute().get().
> >  Val=res.getObject("value").
> >  It's throwing me timeout exception while executing execute().get()
> method.
> > On Wednesday, May 27, 2020, Cesar Garcia <cesar.garcia@ceos.com.ve>
> wrote:
> >
> > > Hello,
> > >
> > > I'm glad it worked.
> > >
> > > Sure if you put your example code, we can help you test it.
> > >
> > > Best regards,
> > >
> > >
> > > El mar., 26 may. 2020 a las 22:53, venki hadoop (<
> hadooponsite@gmail.com
> > >)
> > > escribió:
> > >
> > > > Hello Cesar,.
> > > >                    Was able to configure device and signal function
> > based
> > > > on above instructions.
> > > >  But am unable to retrieve value, am assuming due to version issue,
> > today
> > > > will update to 0.7.0 and test then will update you.
> > > > Regards,
> > > > On Tuesday, May 26, 2020, Cesar Garcia <cesar.garcia@ceos.com.ve>
> > wrote:
> > > >
> > > > > Hi,
> > > > >
> > > > > Please, you can use "karaf.bat" for startup.
> > > > >
> > > > > This way the console start.
> > > > >
> > > > > __  __                 _           _
> > > > > |  \/  |   ___   _ __  | |   ___   | |_
> > > > > | |\/| |  / _ \ | '__| | |  / _ \  | __|
> > > > > | |  | | |  __/ | |    | | | (_) | | |_
> > > > > |_|  |_|  \___| |_|    |_|  \___/   \__|
> > > > >
> > > > > Merlot Industrial Gateway (0.0.1-SNAPSHOT)
> > > > >
> > > > > Hit '<tab>' for a list of available commands
> > > > > and '[cmd] --help' for help on a specific command.
> > > > > Hit '<ctrl-d>' or type 'system:shutdown' or 'logout' to shutdown
> > > Merlot.
> > > > >
> > > > > karaf@root()>
> > > > >
> > > > >
> > > > > Karaf documentation can be found at https://karaf.apache.org
> > > > >
> > > > > If the console starts, the Modbus server is already active, so
> Modbus
> > > > > devices must be created.
> > > > >
> > > > > At the command line type
> > > > >
> > > > > karaf@root>modbus:new --help
> > > > > karaf@root> modbus:new 10 test desc 1000 1000 1000 1000
> > > > >
> > > > > Then check the configuration file for the simulation of the records
> > as
> > > I
> > > > > pointed out in the previous email.
> > > > >
> > > > > You must verify if the instance is active, since the option
> > "start.bat"
> > > > > starts as a service, which you must kill to avoid a problem with
> the
> > > > ports.
> > > > >
> > > > > Take a look at the concept here https://github.com/glcj/
> Merlot/wiki,
> > I
> > > > > will
> > > > > work on the documentation shortly.
> > > > >
> > > > > For tomorrow if you are online, we can use Google meet or other
> tools
> > > if
> > > > > you follow the problems.
> > > > >
> > > > > Best regards,
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > El mar., 26 may. 2020 a las 0:06, venki hadoop (<
> > > hadooponsite@gmail.com
> > > > >)
> > > > > escribió:
> > > > >
> > > > > > Hello Cesar,.
> > > > > >                  Can you please provide me some information
> > regarding
> > > > how
> > > > > > to start device, it's bit confusing.
> > > >  I
> > > > > > made necessary config changes in windows, then started using
> > > start.bat
> > > > > file
> > > > > > from command line prompt. But nothing is happening. Please let
me
> > > know
> > > > > what
> > > > > > am doing is correct?
> > > > > >                Thanks,
> > > > > >
> > > > > > On Tuesday, May 26, 2020, venki hadoop <hadooponsite@gmail.com>
> > > wrote:
> > > > > >
> > > > > > > Thanks Cesar, will test today, update status here.
> > > > > > >
> > > > > > > On Tuesday, May 26, 2020, Cesar Garcia <
> cesar.garcia@ceos.com.ve
> > >
> > > > > wrote:
> > > > > > >
> > > > > > >> Hi Venki,
> > > > > > >>
> > > > > > >> Sorry for the delay, the internet connection was spectacular,
> > the
> > > > ADSL
> > > > > > >> very
> > > > > > >> slow to download and very very & very slow to upload.
> > > > > > >>
> > > > > > >> Attach you will find the download links for the application,
> the
> > > > > version
> > > > > > >> .zip (Windows) and .tar.gz (Linux)...
> > > > > > >>
> > > > > > >>
> > > > > > https://mega.nz/file/nhVgxAQZ#M11oLJc-N5qDnbeF_
> > > > > AhhsQk5ow9B3rPsIT2bt1ZORLc
> > > > > > >>
> > > > > > https://mega.nz/file/zocg0CyT#Pk5E9nRdM-
> xdGNDSjAY9hl27pUpWgPDjdsO_
> > > > > apCE6WQ
> > > > > > >>
> > > > > > >> 1.  You can add a Modbus device through the command
line or
> > > > > permanently
> > > > > > in
> > > > > > >> the configuration file *com.ceos.merlot.modbus.dev.cfg*.
You
> > can
> > > > > > specify
> > > > > > >> the number of elements you require (Coils, Input registers,
> > etc.).
> > > > > > >> 2. After creating the Modbus device, you can add the
> simulation
> > > > > > services,
> > > > > > >> you have three:
> > > > > > >> Random: Which simulates bits and scalars in a given
range of
> > > > > registers.
> > > > > > >> Function: Perform simple math operations
> > > > > > >> Signal: Generates continuous functions (Sinus, square,
> > triangular
> > > > and
> > > > > > >> sawtooth).
> > > > > > >> You can do this in the configuration file *
> > > > > > com.ceos.merlot.modbus.sim.cf
> > > > > > >> g*.
> > > > > > >>
> > > > > > >> The configuration files can be found in the 'etc' directory.
> > > > > > >>
> > > > > > >> In the case of the signals function, you can play with
the
> > > frequency
> > > > > and
> > > > > > >> phase registers, to adjust the signal to your sampling
time.
> > > Please
> > > > > > don't
> > > > > > >> forget our friend Nyquist.
> > > > > > >>
> > > > > > >> I'm going to spend some time on documentation.
> > > > > > >>
> > > > > > >> Chris, this is the tool I was telling you about to
incorporate
> > > into
> > > > > the
> > > > > > >> PLC4X project, if It meet the requirements of course.
> > > > > > >>
> > > > > > >> I hope you find it useful in testing with Modbus
> > > > > > >>
> > > > > > >> Best regards,...
> > > > > > >>
> > > > > > >>
> > > > > > >>
> > > > > > >>
> > > > > > >>
> > > > > > >> El vie., 22 may. 2020 a las 2:27, venki hadoop (<
> > > > > hadooponsite@gmail.com
> > > > > > >)
> > > > > > >> escribió:
> > > > > > >>
> > > > > > >> > Thanks  Cesar,.
> > > > > > >> >                 Sure, will try immediately once
it is
> > available
> > > > and
> > > > > > will
> > > > > > >> > give me feedback.
> > > > > > >> >          Regards,
> > > > > > >> >
> > > > > > >> > On Friday, May 22, 2020, Cesar Garcia <
> > cesar.garcia@ceos.com.ve
> > > >
> > > > > > wrote:
> > > > > > >> >
> > > > > > >> > > Hi,
> > > > > > >> > >
> > > > > > >> > > Sorry,
> > > > > > >> > >
> > > > > > >> > > I misunderstood your email.
> > > > > > >> > >
> > > > > > >> > > You already tried from an OPC server, excellent.
> > > > > > >> > >
> > > > > > >> > > Remember me next week, I am going to implement
the signal
> > > > > simulator
> > > > > > in
> > > > > > >> > > Modbus so you can do your tests with the
PLC4X driver.
> > > > > > >> > >
> > > > > > >> > > The important thing is that you give us feedback,
on any
> > point
> > > > of
> > > > > > >> > > improvement of the driver.
> > > > > > >> > >
> > > > > > >> > > Best regards,
> > > > > > >> > >
> > > > > > >> > > El jue., 21 may. 2020 a las 12:59, venki
hadoop (<
> > > > > > >> hadooponsite@gmail.com
> > > > > > >> > >)
> > > > > > >> > > escribió:
> > > > > > >> > >
> > > > > > >> > > > Hello  Cesar,
> > > > > > >> > > >                    I already tested
with Modbus, but
> want
> > to
> > > > > test
> > > > > > >> with
> > > > > > >> > > > streaming data ( data updated continuously)
like how I
> > > tested
> > > > > > using
> > > > > > >> OPC
> > > > > > >> > > UA
> > > > > > >> > > > server.  Was unable to get streaming
data using Modbus
> > > > > simulator.
> > > > > > >> > > >                    Regards,
> > > > > > >> > > >
> > > > > > >> > > > On Thursday, May 21, 2020, Cesar Garcia
<
> > > > > cesar.garcia@ceos.com.ve
> > > > > > >
> > > > > > >> > > wrote:
> > > > > > >> > > >
> > > > > > >> > > > >  Hello,
> > > > > > >> > > > >
> > > > > > >> > > > > Why don't you try Modbus first
to try out the
> different
> > > > PLC4X
> > > > > > >> tools.
> > > > > > >> > > > >
> > > > > > >> > > > > It is one of the simplest and most
widely used
> > protocols.
> > > > > > >> > Additionally,
> > > > > > >> > > > > Chris has made excellent documentation
of the tools.
> > > > > > >> > > > >
> > > > > > >> > > > >
> > https://plc4x.apache.org/users/plc4j/virtual-modbus.html
> > > > > > >> > > > >
> > > > > > >> > > > > As for the Siemens Software, you
can use it for 15
> days
> > by
> > > > > > >> > downloading
> > > > > > >> > > it
> > > > > > >> > > > > from its pages.
> > > > > > >> > > > >
> > > > > > >> > > > > My grain of sand,
> > > > > > >> > > > >
> > > > > > >> > > > > Happiness,
> > > > > > >> > > > >
> > > > > > >> > > > > El mié., 20 may. 2020 a las 12:13,
venki hadoop (<
> > > > > > >> > > hadooponsite@gmail.com
> > > > > > >> > > > >)
> > > > > > >> > > > > escribió:
> > > > > > >> > > > >
> > > > > > >> > > > > > Hi Lukas, went through the
video mentioned. But I
> > didn't
> > > > get
> > > > > > >> which
> > > > > > >> > > > > siemens
> > > > > > >> > > > > > simulator they used for demo?
Can some one let me
> know
> > > > free
> > > > > > >> siemens
> > > > > > >> > > s7
> > > > > > >> > > > > plc
> > > > > > >> > > > > > simulator for poc purpose?
> > > > > > >> > > > > >
> > > > > > >> > > > > > On Monday, May 18, 2020, Lukas
Ott <
> > > > ott.lukas.14@gmail.com>
> > > > > > >> wrote:
> > > > > > >> > > > > >
> > > > > > >> > > > > > > Hi Venki welcome to the
PLC4X community,
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > First direction we can
point you to is the webinar
> > > from
> > > > > > >> Julian:
> > > > > > >> > > > > > > https://youtu.be/MIp_0OcDTr4
There he shows in
> > detail
> > > > how
> > > > > > to
> > > > > > >> > > connect
> > > > > > >> > > > > > > Siemens PLCs to PLC4X.
> > > > > > >> > > > > > > Additionally he shows
you how to connect to a
> > > simulated
> > > > > PLC
> > > > > > >> > server
> > > > > > >> > > > > which
> > > > > > >> > > > > > is
> > > > > > >> > > > > > > maybe what you are looking
for to test and develop
> > > your
> > > > > > >> > application
> > > > > > >> > > > > with
> > > > > > >> > > > > > > the Kafka connector.
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > Best regards,
> > > > > > >> > > > > > > Lukas
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > Am Mo., 18. Mai 2020
um 16:04 Uhr schrieb venki
> > > hadoop <
> > > > > > >> > > > > > > hadooponsite@gmail.com>:
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > > ---------- Forwarded
message ----------
> > > > > > >> > > > > > > > From: *venki hadoop*
<hadooponsite@gmail.com>
> > > > > > >> > > > > > > > Date: Saturday,
May 16, 2020
> > > > > > >> > > > > > > > Subject: Exploring
Plc4x
> > > > > > >> > > > > > > > To: dev-subscribe@plc4x.apache.org
> > > > > > >> > > > > > > > Cc: chtistofer.dutz@c-ware.de
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > Hello Everyone,
> > > > > > >> > > > > > > >                
 Am a big data/cloud architect
> > > working
> > > > > on
> > > > > > >> > > analytics
> > > > > > >> > > > > > from
> > > > > > >> > > > > > > > India. Was working
in IOT industry since 2 years
> > > with
> > > > > > >> different
> > > > > > >> > > > > clients
> > > > > > >> > > > > > > but
> > > > > > >> > > > > > > > mostly on analytics
side than machine side.
> > Recently
> > > > > when
> > > > > > >> > > exploring
> > > > > > >> > > > > > about
> > > > > > >> > > > > > > > IIOT got to know
about plc4x tool. Since then
> > trying
> > > > to
> > > > > > >> explore
> > > > > > >> > > and
> > > > > > >> > > > > > > present
> > > > > > >> > > > > > > > to larger audience
in my company if it suits our
> > > > > > >> requirements.
> > > > > > >> > > > > > > >
> > > > > > >> > So
> > > > > > >> > > > > what
> > > > > > >> > > > > > am
> > > > > > >> > > > > > > > planning right now
is :
> > > > > > >> > > > Read
> > > > > > >> > > > > > > > streaming data from
siemens device and push it
> > Kafka
> > > > > from
> > > > > > >> there
> > > > > > >> > > > > > > dashboard.
> > > > > > >> > > > > > > > From examples provided
in documentation was able
> > to
> > > > > easily
> > > > > > >> > > > correlate
> > > > > > >> > > > > > > > pushing data into
Kafka and afterwards.  But as
> I
> > > > don't
> > > > > > have
> > > > > > >> > any
> > > > > > >> > > > > > > experience
> > > > > > >> > > > > > > > it's hard to understand
for me about the device
> > > > > > >> configuration
> > > > > > >> > and
> > > > > > >> > > > > > > > integrating with
plc4x( I know this are basic
> plc
> > > > > > questions,
> > > > > > >> > > please
> > > > > > >> > > > > > bear
> > > > > > >> > > > > > > me
> > > > > > >> > > > > > > > with me for some
time). Now in order to start my
> > > poc,
> > > > I
> > > > > > need
> > > > > > >> > > > > fallowing
> > > > > > >> > > > > > > > information. Can
someone help me on this.
> > > 1.
> > > > > Any
> > > > > > >> > siemens
> > > > > > >> > > > plc
> > > > > > >> > > > > > > > device simulator
for poc?
>  2.
> > > > What
> > > > > > >> > > > configuration
> > > > > > >> > > > > > we
> > > > > > >> > > > > > > > need and we have
to check from plc side(
> assuming
> > I
> > > > have
> > > > > > >> some
> > > > > > >> > > > > > temperature
> > > > > > >> > > > > > > > kind of sensor).
> > > > > > >> > > > > > > >                
      3. How to point to plc
> > output
> > > > data
> > > > > > >> from
> > > > > > >> > > Kafka
> > > > > > >> > > > > > > > connect?( Was confused
with memory blocks,
> fields,
> > > etc
> > > > > in
> > > > > > >> the
> > > > > > >> > > > code).
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > >      I know this
are very basic questions from
> plc
> > > > side,
> > > > > > >> but my
> > > > > > >> > > no
> > > > > > >> > > > > > > > experience with
plc side make me hard to
> > understand
> > > > > using
> > > > > > >> > Google.
> > > > > > >> > > > > > > >
> > Last
> > > > but
> > > > > > not
> > > > > > >> > > least,
> > > > > > >> > > > > > thanks
> > > > > > >> > > > > > > > Christofer for introducing
me for this platform
> > and
> > > > > plc4x
> > > > > > >> tool.
> > > > > > >> > > > > > > >                
                   Best Regards,
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > >
> > > > > > >> > > > > >
> > > > > > >> > > > >
> > > > > > >> > > > >
> > > > > > >> > > > > --
> > > > > > >> > > > > *CEOS Automatización, C.A.*
> > > > > > >> > > > > *GALPON SERVICIO INDUSTRIALES Y
NAVALES FA, C.A.,*
> > > > > > >> > > > > *PISO 1, OFICINA 2, AV. RAUL LEONI,
SECTOR
> GUAMACHITO,*
> > > > > > >> > > > >
> > > > > > >> > > > > *FRENTE A LA ASOCIACION DE GANADEROS,BARCELONA,EDO.
> > > > > ANZOATEGUI*
> > > > > > >> > > > > *Ing. César García*
> > > > > > >> > > > >
> > > > > > >> > > > > *Cel: +58 414-760.98.95*
> > > > > > >> > > > >
> > > > > > >> > > > > *Hotline Técnica SIEMENS: 0800
1005080*
> > > > > > >> > > > >
> > > > > > >> > > > > *Email: support.aan.automation@siemens.com
> > > > > > >> > > > > <support.aan.automation@siemens.com>*
> > > > > > >> > > > >
> > > > > > >> > > >
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> > > --
> > > > > > >> > > *CEOS Automatización, C.A.*
> > > > > > >> > > *GALPON SERVICIO INDUSTRIALES Y NAVALES FA,
C.A.,*
> > > > > > >> > > *PISO 1, OFICINA 2, AV. RAUL LEONI, SECTOR
GUAMACHITO,*
> > > > > > >> > >
> > > > > > >> > > *FRENTE A LA ASOCIACION DE GANADEROS,BARCELONA,EDO.
> > > ANZOATEGUI*
> > > > > > >> > > *Ing. César García*
> > > > > > >> > >
> > > > > > >> > > *Cel: +58 414-760.98.95*
> > > > > > >> > >
> > > > > > >> > > *Hotline Técnica SIEMENS: 0800 1005080*
> > > > > > >> > >
> > > > > > >> > > *Email: support.aan.automation@siemens.com
> > > > > > >> > > <support.aan.automation@siemens.com>*
> > > > > > >> > >
> > > > > > >> >
> > > > > > >>
> > > > > > >>
> > > > > > >> --
> > > > > > >> *CEOS Automatización, C.A.*
> > > > > > >> *GALPON SERVICIO INDUSTRIALES Y NAVALES FA, C.A.,*
> > > > > > >> *PISO 1, OFICINA 2, AV. RAUL LEONI, SECTOR GUAMACHITO,*
> > > > > > >>
> > > > > > >> *FRENTE A LA ASOCIACION DE GANADEROS,BARCELONA,EDO.
> ANZOATEGUI*
> > > > > > >> *Ing. César García*
> > > > > > >>
> > > > > > >> *Cel: +58 414-760.98.95*
> > > > > > >>
> > > > > > >> *Hotline Técnica SIEMENS: 0800 1005080*
> > > > > > >>
> > > > > > >> *Email: support.aan.automation@siemens.com
> > > > > > >> <support.aan.automation@siemens.com>*
> > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > *CEOS Automatización, C.A.*
> > > > > *GALPON SERVICIO INDUSTRIALES Y NAVALES FA, C.A.,*
> > > > > *PISO 1, OFICINA 2, AV. RAUL LEONI, SECTOR GUAMACHITO,*
> > > > >
> > > > > *FRENTE A LA ASOCIACION DE GANADEROS,BARCELONA,EDO. ANZOATEGUI*
> > > > > *Ing. César García*
> > > > >
> > > > > *Cel: +58 414-760.98.95*
> > > > >
> > > > > *Hotline Técnica SIEMENS: 0800 1005080*
> > > > >
> > > > > *Email: support.aan.automation@siemens.com
> > > > > <support.aan.automation@siemens.com>*
> > > > >
> > > >
> > >
> > >
> > > --
> > > *CEOS Automatización, C.A.*
> > > *GALPON SERVICIO INDUSTRIALES Y NAVALES FA, C.A.,*
> > > *PISO 1, OFICINA 2, AV. RAUL LEONI, SECTOR GUAMACHITO,*
> > >
> > > *FRENTE A LA ASOCIACION DE GANADEROS,BARCELONA,EDO. ANZOATEGUI*
> > > *Ing. César García*
> > >
> > > *Cel: +58 414-760.98.95*
> > >
> > > *Hotline Técnica SIEMENS: 0800 1005080*
> > >
> > > *Email: support.aan.automation@siemens.com
> > > <support.aan.automation@siemens.com>*
> > >
> >
>
>
> --
> *CEOS Automatización, C.A.*
> *GALPON SERVICIO INDUSTRIALES Y NAVALES FA, C.A.,*
> *PISO 1, OFICINA 2, AV. RAUL LEONI, SECTOR GUAMACHITO,*
>
> *FRENTE A LA ASOCIACION DE GANADEROS,BARCELONA,EDO. ANZOATEGUI*
> *Ing. César García*
>
> *Cel: +58 414-760.98.95*
>
> *Hotline Técnica SIEMENS: 0800 1005080*
>
> *Email: support.aan.automation@siemens.com
> <support.aan.automation@siemens.com>*
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message