synapse-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Pasquale Campitiello" <pas.campitie...@gmail.com>
Subject Re: Link jUDDI 0.9rc4 to Synapse 1.2
Date Thu, 11 Dec 2008 13:13:17 GMT
When you talk about a new Endpoint type you refer to this interface
http://synapse.apache.org/apidocs/org/apache/synapse/endpoints/Endpoint.html

or to the classes indicated as
"All Known Implementing Classes:
AddressEndpoint<http://synapse.apache.org/apidocs/org/apache/synapse/endpoints/AddressEndpoint.html>,
DefaultEndpoint<http://synapse.apache.org/apidocs/org/apache/synapse/endpoints/DefaultEndpoint.html>,
FailoverEndpoint<http://synapse.apache.org/apidocs/org/apache/synapse/endpoints/FailoverEndpoint.html>,
IndirectEndpoint<http://synapse.apache.org/apidocs/org/apache/synapse/endpoints/IndirectEndpoint.html>,
LoadbalanceEndpoint<http://synapse.apache.org/apidocs/org/apache/synapse/endpoints/LoadbalanceEndpoint.html>,
SALoadbalanceEndpoint<http://synapse.apache.org/apidocs/org/apache/synapse/endpoints/SALoadbalanceEndpoint.html>,
WSDLEndpoint<http://synapse.apache.org/apidocs/org/apache/synapse/endpoints/WSDLEndpoint.html>
"* *?
Is that a fast solution?
What is wrong or right in our previous XML sample syntax?

Thanks
Pasquale



2008/12/11 Paul Fremantle <pzfreo@gmail.com>

> Pasquale
>
> You have to write some new Java code. The current Synapse code has no
> support for jUDDI or UDDI. Ideally we would extend the Synapse code to
> understand a new Endpoint type (the Endpoint type is extensible).
>
> To extend Synapse you must usually write both a new XML syntax (like
> the ones you have been trying), the code to parse that XML, and the
> underlying code to act on that information (in this case the code to
> make a query from UDDI and to pass the right URL back to the rest of
> Synapse).
>
> Paul
>
> On Wed, Dec 10, 2008 at 10:05 PM, Pasquale Campitiello
>  <pas.campitiello@gmail.com> wrote:
> > We also tried this:
> >
> > <definitions xmlns="http://ws.apache.org/ns/synapse">
> >     <sequence name="main">
> >         <in>
> >             <send>
> >                 <!-- get epr from the given wsdl -->
> >                 <endpoint>
> >                     <parameter
> > name="tModelKey">uuid:EA9D6C10-C56F-11DD-ABCC-D8EB6125F14E"</parameter>
> >                     <address uri="http://localhost:8080/juddi"/>
> >                     <parameter name="userID">juddi</parameter>
> >                 </endpoint>
> >             </send>
> >         </in>
> >         <out>
> >             <send/>
> >         </out>
> >     </sequence>
> > </definitions>
> >
> > And the server doesn't return exceptions. It seems all right, but we
> don't
> > know if it is a correct implementation!
> > How can we undestand if this is a correct implementation?
> > Once we start Synapse with this sample, this endpoint will return
> something?
> > What are the effects and where are they visible?
> >
> > Thank you
> >
> > Pasquale
> >
> >
> >
> >
> > 2008/12/9 Pasquale Campitiello <pas.campitiello@gmail.com>
> >>
> >> Hi,
> >>
> >> in order to create the endpoint, we looked at sample 56 in
> >> http://synapse.apache.org/Synapse_Samples.html.
> >> We followed this link
> >> http://www.descriptor.com/articles/web-services/juddi-p2.html to know
> how
> >> publish WSDL with jUDDI console. Now we published some example WSDL, and
> we
> >> have some information about them: business key, tModel key, ecc. We know
> >> also that, running axis2server, at
> >> http://localhost:9000/soap/SimpleStockQuoteService?wsdl there is the
> WSDL
> >> for "SimpleStockQuoteService".
> >> Starting from this information we roughly tried to modify
> >> synapse_sample_56.xml, and we saved the following file in sample
> directory
> >> like synapse_sample_500.xml:
> >>
> >> <definitions xmlns="http://ws.apache.org/ns/synapse">
> >>  <sequence name="main">
> >>     <in>
> >>       <send>
> >>        <!--  get epr from the given wsdl
> >>         -->
> >>        <endpoint>
> >>         <uddi tmodel="uuid:EA9D6C10-C56F-11DD-ABCC-D8EB6125F14E" />
> >>        </endpoint>
> >>       </send>
> >>     </in>
> >>     <out>
> >>       <send />
> >>     </out>
> >>  </sequence>
> >> </definitions>
> >>
> >> We inserted the tModel key of the WSDL we published with jUDDI
> >> ("uuid:EA9D6C10-C56F-11DD-ABCC-D8EB6125F14E").
> >>
> >> Now, we:
> >> -> deploy the SimpleStockQuoteService
> >> -> start the sample Axis2 server.
> >> -> start the Synapse configuration numbered 500 (synapse -sample 500)
> >>
> >> and the server is "Ready for processing"! Now we don't understand if
> this
> >> is correct or it is accidental!
> >>
> >> We think that it is also correct to insert
> >> http://localhost:9000/soap/SimpleStockQuoteService?wsdl  in sample XML,
> but
> >> we don't know how. We did many other XML attempts, but everytime we got
> some
> >> exception.
> >> We also searched in the UDDI2.0 specification but we didn't find any
> >> useful information about endpoints, and WSDL. We are searching in the
> WSDL
> >> specification.
> >>
> >> Now the questions are:
> >>
> >> 1) How we can create correctly the endpoint? Is the Synapse sample 56
> >> useful in this way?
> >>
> >> 2) Just to have the tModel key is sufficient to link to Synapse to the
> >> service WSDL?
> >>
> >> 3) Once we created the endpoint what we have to do precisely? And how
> >> about the interface[s] to implement?
> >>
> >> Thanks
> >>
> >> Pasquale Campitiello
> >>
> >>
> >>
> >> 2008/12/7 Pasquale Campitiello <pas.campitiello@gmail.com>
> >>>
> >>> I recompiled the Synapse source with JDK5_10 and now both jUDDI and
> >>> Synapse run without problems.
> >>>
> >>> We are searching for information about endpoint on UDDI2.0 and WSDL2.0
> >>> specifications.
> >>>
> >>> Pasquale
> >>>
> >>> 2008/12/4 Pasquale Campitiello <pas.campitiello@gmail.com>
> >>>>
> >>>> Ok. We published a generic service generic SimpleStockQuote with
> jUDDI.
> >>>> This XML file summarize all the basic data of the service (tmodel, url
> >>>> ecc):
> >>>>
> >>>> <?xml version="1.0" encoding="UTF-8"?><soapenv:Envelope
> >>>> xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
> >>>> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> >>>> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> >>>>  <soapenv:Body>
> >>>>   <serviceDetail generic="2.0" operator="jUDDI.org"
> >>>> xmlns="urn:uddi-org:api_v2">
> >>>>    <businessService businessKey="23E5A350-C22A-11DD-A350-8D826382C57F"
> >>>> serviceKey="471A6F80-C22B-11DD-AF80-A18B79866E43">
> >>>>     <name>Stock Quote Service</name>
> >>>>     <description>prova 1 dam</description>
> >>>>     <bindingTemplates>
> >>>>      <bindingTemplate
> bindingKey="472B1150-C22B-11DD-9150-87412D5B2DA6"
> >>>> serviceKey="471A6F80-C22B-11DD-AF80-A18B79866E43">
> >>>>       <accessPoint
> >>>> URLType="http">http://localhost:9000/soap/SimpleStockQuoteService
> </accessPoint>
> >>>>       <tModelInstanceDetails>
> >>>>        <tModelInstanceInfo
> >>>> tModelKey="uuid:BB4AF650-C22A-11DD-B650-F49EB0FF9773">
> >>>>         <instanceDetails>
> >>>>          <overviewDoc>
> >>>>
> >>>> <overviewURL>http://localhost:9000/soap/SimpleStockQuoteService?wsdl
> </overviewURL>
> >>>>          </overviewDoc>
> >>>>         </instanceDetails>
> >>>>        </tModelInstanceInfo>
> >>>>       </tModelInstanceDetails>
> >>>>      </bindingTemplate>
> >>>>     </bindingTemplates>
> >>>>    </businessService>
> >>>>   </serviceDetail>
> >>>>  </soapenv:Body>
> >>>> </soapenv:Envelope>
> >>>> --------------------------------
> >>>>
> >>>> in particular (we read on the web):
> >>>>
> >>>> The accessPoint, by convention, is the service's endpoint URL
> >>>> This tModelKey ties the service and binding template to the tModel we
> >>>> create earlier
> >>>>
> >>>> Now, starting from there how can we write the correct endpoint?
> >>>> Or, at least, what are the information we can use from this XML to
> >>>> create later the UDDI endpoint?
> >>>>
> >>>> Thanks
> >>>>
> >>>> Pasquale
> >>>>
> >>>>
> >>>>
> >>>> 2008/12/3 Pasquale Campitiello <pas.campitiello@gmail.com>
> >>>>>
> >>>>> Ok. We solved that problem.
> >>>>>
> >>>>> I reinstalled the JDK 5.0 Update 10. The problem was not in the
> >>>>> CLASSPATH or the JAVA_HOME, but it was the JVM used by Apache Tomcat:
> I
> >>>>> right clicked on the Monitor Tomcat icon --> Configure... -->
tab
> Java -->
> >>>>> browse and set the JDK 5.0_10 JVM (in my case
> >>>>> C:\Programmi\Java\jdk_jee_5u10\jdk\jre\bin\server\jvm.dll).
> >>>>>
> >>>>> I go on with the project. Now I have to recompile Synapse under
JDK
> 5.0
> >>>>> Update 10.
> >>>>>
> >>>>> Pasquale
> >>>>>
> >>>>>
> >>>>>
> >>>>> 2008/12/1 Paul Fremantle <pzfreo@gmail.com>
> >>>>>>
> >>>>>> I'm hoping someone on jUDDI will respond, because I have to
admit I
> >>>>>> don't know.
> >>>>>>
> >>>>>> Paul
> >>>>>>
> >>>>>> On Mon, Dec 1, 2008 at 7:50 PM, Pasquale Campitiello
> >>>>>> <pas.campitiello@gmail.com> wrote:
> >>>>>> > Perfect. Now I'm able to see the log in the console. I
do within
> >>>>>> > Eclipse:
> >>>>>> >
> >>>>>> > menu Run --> Open Run Dialog... --> Classpath tab
--> select
> >>>>>> > Bootstrap
> >>>>>> > Entries --> click Advanced --> Add external folder
--> select
> >>>>>> > %SYNAPSE_HOME%\lib --> then click Up to move it up within
> Bootstrap
> >>>>>> > Entries
> >>>>>> > (however it suffice add %SYNAPSE_HOME%\lib in Bootstrap
Entries).
> >>>>>> >
> >>>>>> > Now, I'm studying how jUDDI looks to WSDL, how jUDDI can
provide
> >>>>>> > UDDI
> >>>>>> > methods. I configured correctly jUDDI: I can see the "Happy
> jUDDI!"
> >>>>>> > page
> >>>>>> > without errors. But I have a common problem: in the jUDDI
console
> >>>>>> > when I
> >>>>>> > click get_authToken to obtain an authentication token,
and I
> insert
> >>>>>> > my user
> >>>>>> > and cred I get always the same error:
> >>>>>> >
> >>>>>> > <?xml version="1.0" encoding="utf-8" ?>
> >>>>>> > <SOAP-ENV:Envelope
> >>>>>> > xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
> >>>>>> > <SOAP-ENV:Header/>
> >>>>>> > <SOAP-ENV:Body>
> >>>>>> > <SOAP-ENV:Fault>
> >>>>>> > <faultcode>SOAP-ENV:Server</faultcode>
> >>>>>> > <faultstring>Fault string, and possibly fault code,
not
> >>>>>> > set</faultstring>
> >>>>>> > </SOAP-ENV:Fault>
> >>>>>> > </SOAP-ENV:Body>
> >>>>>> > </SOAP-ENV:Envelope>
> >>>>>> >
> >>>>>> > I tried every possible combination of user and cred ("juddi"
+
> >>>>>> > "juddi",
> >>>>>> > "juddi" + "";    "juddi" + "123456";    "jdoe" + "",  
 ecc.), but
> >>>>>> > everytime
> >>>>>> > I got this SOAP response. To configure jUDDI I followed
the
> official
> >>>>>> > document
> >>>>>> >
> >>>>>> >
> http://svn.apache.org/viewvc/webservices/juddi/trunk/docs/Getting-Started.pdf?revision=547750
> >>>>>> > so my configuration file are exactly like specified in
the
> document.
> >>>>>> >
> >>>>>> > Googling I read about changing the JDK version. I tried
JDK 5
> update
> >>>>>> > 10, JDK
> >>>>>> > 5 update 16, JDK + JEE 5 update 10, but nothing changed,
and
> besides
> >>>>>> > with
> >>>>>> > this versions I can't run Synapse. Now with JDK + JEE 6
update 10,
> I
> >>>>>> > can run
> >>>>>> > Synapse but I'm still blocked with jUDDI.
> >>>>>> >
> >>>>>> > Someone can help me? [I post this e-mail also in the jUDDI
dev
> >>>>>> > mailing list]
> >>>>>> >
> >>>>>> > Thanks
> >>>>>> >
> >>>>>> > Pasquale
> >>>>>> >
> >>>>>> >
> >>>>>> > 2008/11/29 Hiranya Jayathilaka <hiranya911@gmail.com>
> >>>>>> >>
> >>>>>> >> Hi Pasquale,
> >>>>>> >> Good to hear that you managed to start and stop Synapse
from
> within
> >>>>>> >> your
> >>>>>> >> IDE. Both Eclipse and Idea enable you to configure
the classpath.
> >>>>>> >> AFAIK in Eclipse you have to configure classpath from
your
> >>>>>> >> run/debug
> >>>>>> >> configuration window. Open up your run configuration
window, go
> to
> >>>>>> >> the
> >>>>>> >> classpath tab and hit the advanced button. Then you
can add a
> >>>>>> >> directory of
> >>>>>> >> your choice to the project classpath.
> >>>>>> >> In Idea you should go to settings and hit the project
settings
> >>>>>> >> button and
> >>>>>> >> make your changes to the classpath from there. (Look
for a window
> >>>>>> >> where you
> >>>>>> >> can specify project dependencies)
> >>>>>> >> In both IDEs classpath items are shown in a list. You
can
> generally
> >>>>>> >> select
> >>>>>> >> items and change the order in which they appear. The
first item
> in
> >>>>>> >> the list
> >>>>>> >> will be the first entry in your classpath string.
> >>>>>> >> Hope this helps. Good luck.
> >>>>>> >> Thanks
> >>>>>> >> Best Regards,
> >>>>>> >> Hiranya
> >>>>>> >> On Sat, Nov 29, 2008 at 4:40 AM, Pasquale Campitiello
> >>>>>> >> <pas.campitiello@gmail.com> wrote:
> >>>>>> >>>
> >>>>>> >>> Ok. Now I'm really able to run Synapse into Eclipse.
> >>>>>> >>> Hiranya, I tried to stop Synapse (and so the javaw.exe
process)
> >>>>>> >>> hitting
> >>>>>> >>> the stop button on Eclipse Console and it is ok.
I also tried
> the
> >>>>>> >>> QuickStart
> >>>>>> >>> guide of Synapse, launching the configuration "sample
0" and
> >>>>>> >>> "sample 150"
> >>>>>> >>> within Eclipse, and everything successfully completed.
> >>>>>> >>>
> >>>>>> >>> But, yet I'm not able to configure the Log4J. I
know that
> IntelliJ
> >>>>>> >>> IDEA
> >>>>>> >>> is a commercial IDE and it is possile to apply/buy
several types
> >>>>>> >>> of
> >>>>>> >>> licenses, but I don't know precisely what I have
to do with it
> for
> >>>>>> >>> configuring "$BASE_DIR/lib directory to the front
of the
> >>>>>> >>> classpath".
> >>>>>> >>>
> >>>>>> >>> Do I have to install IntelliJ IDEA (with "Classroom
license", I
> >>>>>> >>> suppose,
> >>>>>> >>> because I'm doing this work for univesity...)?
> >>>>>> >>> Do I have to import Synapse into IDEA? How can
I set
> >>>>>> >>> "$BASE_DIR/lib
> >>>>>> >>> directory to the front of the classpath"?
> >>>>>> >>> Is it impossibile to configure the Log4J in Eclipse,
without
> IDEA?
> >>>>>> >>>
> >>>>>> >>> Thank you
> >>>>>> >>>
> >>>>>> >>> Pasquale
> >>>>>> >>>
> >>>>>> >>>
> >>>>>> >>> 2008/11/25 Hiranya Jayathilaka <hiranya911@gmail.com>
> >>>>>> >>>>
> >>>>>> >>>> Hi Pasquale,
> >>>>>> >>>>
> >>>>>> >>>> Please see my comments in-line.
> >>>>>> >>>>
> >>>>>> >>>> On Tue, Nov 25, 2008 at 4:48 AM, Pasquale Campitiello
> >>>>>> >>>> <pas.campitiello@gmail.com> wrote:
> >>>>>> >>>>>
> >>>>>> >>>>> I'm proceeding with my project to create
an interface to
> connect
> >>>>>> >>>>> jUDDI
> >>>>>> >>>>> 0.9rc4 and Synapse 1.4. I have some questions:
> >>>>>> >>>>>
> >>>>>> >>>>> 1) I imported the source code of Synapse
in Eclipse with the
> >>>>>> >>>>> parameter
> >>>>>> >>>>> specified by Asankha Perera in the last
mail. But I don't
> >>>>>> >>>>> understand this:
> >>>>>> >>>>>
> >>>>>> >>>>>> I use the classpath from the IDE project,
and with IDEA, I
> add
> >>>>>> >>>>>> the
> >>>>>> >>>>>> $BASE_DIR/lib directory to the front
of the classpath to make
> >>>>>> >>>>>> sure my
> >>>>>> >>>>>> log4j.properties is correctly picked
up and the normal logs
> >>>>>> >>>>>> appear
> >>>>>> >>>>>
> >>>>>> >>>>> It is about the object log (I see that
this object is used
> very
> >>>>>> >>>>> much)?
> >>>>>> >>>>> And where is a logfile?
> >>>>>> >>>>
> >>>>>> >>>> Synapse uses Apache Commons Logging and Log4J
for logging
> >>>>>> >>>> purposes. The
> >>>>>> >>>> logging configuration is specified in a file
called
> >>>>>> >>>> log4j.properties which
> >>>>>> >>>> generally resides in the $BASE_DIR/lib directory.
By adding
> this
> >>>>>> >>>> directory
> >>>>>> >>>> to the beginning of your classpath you make
the log4.properties
> >>>>>> >>>> file get a
> >>>>>> >>>> higher precedence over the other configuration
files. This will
> >>>>>> >>>> enable
> >>>>>> >>>> Synapse to print out some useful log statements
on you IDE
> >>>>>> >>>> console while it
> >>>>>> >>>> is operating within your IDE.
> >>>>>> >>>>
> >>>>>> >>>>>
> >>>>>> >>>>>
> >>>>>> >>>>> THANK YOU
> >>>>>> >>>>>
> >>>>>> >>>>> Pasquale Campitiello
> >>>>>> >>>>>
> >>>>>> >>>>>
> >>>>>> >>>>>
> >>>>>> >>>>>
> >>>>>> >>>>>
> >>>>>> >>>>>
> >>>>>> >>>>>
> >>>>>> >>>>>
> >>>>>> >>>>>
> >>>>>> >>>>>
> >>>>>> >>>>> 2008/11/13 Pasquale Campitiello <pas.campitiello@gmail.com>
> >>>>>> >>>>>>
> >>>>>> >>>>>> I thank you very much for your help,
really I'm a beginner
> but
> >>>>>> >>>>>> I need
> >>>>>> >>>>>> to do this work (hard, for me).
> >>>>>> >>>>>>
> >>>>>> >>>>>> However, ok, in this weekend I will
prepare my computer to
> run
> >>>>>> >>>>>> everything (now I have to format for
several problems).
> >>>>>> >>>>>> Then I will try to import the project
in Eclipse, and I will
> >>>>>> >>>>>> ask you
> >>>>>> >>>>>> my doubts.
> >>>>>> >>>>>> For example, in the first place what
is "implementing a UDDI
> >>>>>> >>>>>> endpoint,
> >>>>>> >>>>>> that gets the actual endpoint from
UDDI"?.
> >>>>>> >>>>>>
> >>>>>> >>>>>> Thanks
> >>>>>> >>>>>>
> >>>>>> >>>>>> Pasquale
> >>>>>> >>>>>>
> >>>>>> >>>>>>
> >>>>>> >>>>>> 2008/11/13 Asankha C. Perera <asankha@apache.org>
> >>>>>> >>>>>>>
> >>>>>> >>>>>>> Pasquale
> >>>>>> >>>>>>>>
> >>>>>> >>>>>>>> As for getting the Synapse
code into Eclipse, try mvn
> eclipse
> >>>>>> >>>>>>>>
> >>>>>> >>>>>>>
> >>>>>> >>>>>>> Yes, first do a full online build
with "mvn clean install"
> (or
> >>>>>> >>>>>>> "mvn
> >>>>>> >>>>>>> clean install -Dmaven.test.skip"
if unit tests fail), and
> then
> >>>>>> >>>>>>> do "mvn
> >>>>>> >>>>>>> eclipse:eclipse" to build the project.
> >>>>>> >>>>>>>
> >>>>>> >>>>>>> To run the default configuration
from the IDE, what I
> normally
> >>>>>> >>>>>>> do is,
> >>>>>> >>>>>>> build and extract the binary Zip
to some location, and use
> >>>>>> >>>>>>> that location as
> >>>>>> >>>>>>> the base directory and start the
Synapse engine as follows:
> >>>>>> >>>>>>>
> >>>>>> >>>>>>> Main class: org.apache.synapse.SynapseServer
> >>>>>> >>>>>>> VM params: -server -Xms256M -Xmx256M
> >>>>>> >>>>>>> -Dcom.sun.management.jmxremote
> >>>>>> >>>>>>> Program parameters:
> /home/asankha/java/synapse-1.2/repository
> >>>>>> >>>>>>>  /home/asankha/java/synapse-1.2/repository/conf/axis2.xml
> >>>>>> >>>>>>>  /home/asankha/java/synapse-1.2/
> >>>>>> >>>>>>> /home/asankha/java/synapse-1.2/repository/conf/synapse.xml
> >>>>>> >>>>>>> Working directory: /home/asankha/java/synapse-1.2
> >>>>>> >>>>>>>
> >>>>>> >>>>>>> I use the classpath from the IDE
project, and with IDEA, I
> add
> >>>>>> >>>>>>> the
> >>>>>> >>>>>>> $BASE_DIR/lib directory to the
front of the classpath to
> make
> >>>>>> >>>>>>> sure my
> >>>>>> >>>>>>> log4j.properties is correctly picked
up and the normal logs
> >>>>>> >>>>>>> appear
> >>>>>> >>>>>>>
> >>>>>> >>>>>>> From here onwards, Synapse can
run purely within the IDE
> >>>>>> >>>>>>>
> >>>>>> >>>>>>> asankha
> >>>>>> >>>>>>>
> >>>>>> >>>>>>> --
> >>>>>> >>>>>>> Asankha C. Perera
> >>>>>> >>>>>>> http://adroitlogic.org
> >>>>>> >>>>>>>
> >>>>>> >>>>>>> http://esbmagic.blogspot.com
> >>>>>> >>>>>>>
> >>>>>> >>>>>>>
> >>>>>> >>>>>>>
> >>>>>> >>>>>>>
> ---------------------------------------------------------------------
> >>>>>> >>>>>>> To unsubscribe, e-mail: dev-unsubscribe@synapse.apache.org
> >>>>>> >>>>>>> For additional commands, e-mail:
> dev-help@synapse.apache.org
> >>>>>> >>>>>>>
> >>>>>> >>>>>>
> >>>>>> >>>>>
> >>>>>> >>>>
> >>>>>> >>>
> >>>>>> >>
> >>>>>> >
> >>>>>> >
> >>>>>> >
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> --
> >>>>>> Paul Fremantle
> >>>>>> Co-Founder and CTO, WSO2
> >>>>>> Apache Synapse PMC Chair
> >>>>>> OASIS WS-RX TC Co-chair
> >>>>>>
> >>>>>> blog: http://pzf.fremantle.org
> >>>>>> paul@wso2.com
> >>>>>>
> >>>>>> "Oxygenating the Web Service Platform", www.wso2.com
> >>>>>>
> >>>>>>
> ---------------------------------------------------------------------
> >>>>>> To unsubscribe, e-mail: dev-unsubscribe@synapse.apache.org
> >>>>>> For additional commands, e-mail: dev-help@synapse.apache.org
> >>>>>>
> >>>>>
> >>>>
> >>>
> >>
> >
> >
>
>
>
> --
>  Paul Fremantle
> Co-Founder and CTO, WSO2
> Apache Synapse PMC Chair
> OASIS WS-RX TC Co-chair
>
> blog: http://pzf.fremantle.org
> paul@wso2.com
>
> "Oxygenating the Web Service Platform", www.wso2.com
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@synapse.apache.org
> For additional commands, e-mail: dev-help@synapse.apache.org
>
>

Mime
View raw message