usergrid-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From sfeld...@apache.org
Subject [03/68] [abbrv] incubator-usergrid git commit: Remove binaries from source code control, we were already excluding them from the build.
Date Fri, 17 Apr 2015 22:47:08 GMT
http://git-wip-us.apache.org/repos/asf/incubator-usergrid/blob/31ad5987/sdks/dotnet/packages/RestSharp.104.1/lib/sl4-wp71/RestSharp.WindowsPhone.xml
----------------------------------------------------------------------
diff --git a/sdks/dotnet/packages/RestSharp.104.1/lib/sl4-wp71/RestSharp.WindowsPhone.xml b/sdks/dotnet/packages/RestSharp.104.1/lib/sl4-wp71/RestSharp.WindowsPhone.xml
deleted file mode 100644
index 9ee553e..0000000
--- a/sdks/dotnet/packages/RestSharp.104.1/lib/sl4-wp71/RestSharp.WindowsPhone.xml
+++ /dev/null
@@ -1,3510 +0,0 @@
-<?xml version="1.0"?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<doc>
-    <assembly>
-        <name>RestSharp.WindowsPhone</name>
-    </assembly>
-    <members>
-        <member name="T:RestSharp.Authenticators.OAuth1Authenticator">
-            <seealso href="http://tools.ietf.org/html/rfc5849"/>
-        </member>
-        <member name="T:RestSharp.OAuth2Authenticator">
-            <summary>
-            Base class for OAuth 2 Authenticators.
-            </summary>
-            <remarks>
-            Since there are many ways to authenticate in OAuth2,
-            this is used as a base class to differentiate between 
-            other authenticators.
-            
-            Any other OAuth2 authenticators must derive from this
-            abstract class.
-            </remarks>
-        </member>
-        <member name="F:RestSharp.OAuth2Authenticator._accessToken">
-            <summary>
-            Access token to be used when authenticating.
-            </summary>
-        </member>
-        <member name="M:RestSharp.OAuth2Authenticator.#ctor(System.String)">
-            <summary>
-            Initializes a new instance of the <see cref="T:RestSharp.OAuth2Authenticator"/> class.
-            </summary>
-            <param name="accessToken">
-            The access token.
-            </param>
-        </member>
-        <member name="P:RestSharp.OAuth2Authenticator.AccessToken">
-            <summary>
-            Gets the access token.
-            </summary>
-        </member>
-        <member name="T:RestSharp.OAuth2UriQueryParameterAuthenticator">
-            <summary>
-            The OAuth 2 authenticator using URI query parameter.
-            </summary>
-            <remarks>
-            Based on http://tools.ietf.org/html/draft-ietf-oauth-v2-10#section-5.1.2
-            </remarks>
-        </member>
-        <member name="M:RestSharp.OAuth2UriQueryParameterAuthenticator.#ctor(System.String)">
-            <summary>
-            Initializes a new instance of the <see cref="T:RestSharp.OAuth2UriQueryParameterAuthenticator"/> class.
-            </summary>
-            <param name="accessToken">
-            The access token.
-            </param>
-        </member>
-        <member name="T:RestSharp.OAuth2AuthorizationRequestHeaderAuthenticator">
-            <summary>
-            The OAuth 2 authenticator using the authorization request header field.
-            </summary>
-            <remarks>
-            Based on http://tools.ietf.org/html/draft-ietf-oauth-v2-10#section-5.1.1
-            </remarks>
-        </member>
-        <member name="F:RestSharp.OAuth2AuthorizationRequestHeaderAuthenticator._authorizationValue">
-            <summary>
-            Stores the Authoriztion header value as "OAuth accessToken". used for performance.
-            </summary>
-        </member>
-        <member name="M:RestSharp.OAuth2AuthorizationRequestHeaderAuthenticator.#ctor(System.String)">
-            <summary>
-            Initializes a new instance of the <see cref="T:RestSharp.OAuth2AuthorizationRequestHeaderAuthenticator"/> class.
-            </summary>
-            <param name="accessToken">
-            The access token.
-            </param>
-        </member>
-        <member name="F:RestSharp.Authenticators.OAuth.OAuthTools._encoding">
-            <summary>
-            All text parameters are UTF-8 encoded (per section 5.1).
-            </summary>
-            <seealso cref="!:http://www.hueniverse.com/hueniverse/2008/10/beginners-gui-1.html"/> 
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.GetNonce">
-            <summary>
-            Generates a random 16-byte lowercase alphanumeric string. 
-            </summary>
-            <seealso cref="!:http://oauth.net/core/1.0#nonce"/>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.GetTimestamp">
-            <summary>
-            Generates a timestamp based on the current elapsed seconds since '01/01/1970 0000 GMT"
-            </summary>
-            <seealso cref="!:http://oauth.net/core/1.0#nonce"/>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.GetTimestamp(System.DateTime)">
-            <summary>
-            Generates a timestamp based on the elapsed seconds of a given time since '01/01/1970 0000 GMT"
-            </summary>
-            <seealso cref="!:http://oauth.net/core/1.0#nonce"/>
-            <param name="dateTime">A specified point in time.</param>
-            <returns></returns>
-        </member>
-        <member name="F:RestSharp.Authenticators.OAuth.OAuthTools.UriRfc3986CharsToEscape">
-            <summary>
-            The set of characters that are unreserved in RFC 2396 but are NOT unreserved in RFC 3986.
-            </summary>
-            <seealso cref="!:http://stackoverflow.com/questions/846487/how-to-get-uri-escapedatastring-to-comply-with-rfc-3986"/>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.UrlEncodeRelaxed(System.String)">
-            <summary>
-            URL encodes a string based on section 5.1 of the OAuth spec.
-            Namely, percent encoding with [RFC3986], avoiding unreserved characters,
-            upper-casing hexadecimal characters, and UTF-8 encoding for text value pairs.
-            </summary>
-            <param name="value">The value to escape.</param>
-            <returns>The escaped value.</returns>
-            <remarks>
-            The <see cref="M:System.Uri.EscapeDataString(System.String)"/> method is <i>supposed</i> to take on
-            RFC 3986 behavior if certain elements are present in a .config file.  Even if this
-            actually worked (which in my experiments it <i>doesn't</i>), we can't rely on every
-            host actually having this configuration element present.
-            </remarks>
-            <seealso cref="!:http://oauth.net/core/1.0#encoding_parameters"/>
-            <seealso cref="!:http://stackoverflow.com/questions/846487/how-to-get-uri-escapedatastring-to-comply-with-rfc-3986"/>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.UrlEncodeStrict(System.String)">
-            <summary>
-            URL encodes a string based on section 5.1 of the OAuth spec.
-            Namely, percent encoding with [RFC3986], avoiding unreserved characters,
-            upper-casing hexadecimal characters, and UTF-8 encoding for text value pairs.
-            </summary>
-            <param name="value"></param>
-            <seealso cref="!:http://oauth.net/core/1.0#encoding_parameters"/>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.NormalizeRequestParameters(RestSharp.Authenticators.OAuth.WebParameterCollection)">
-            <summary>
-            Sorts a collection of key-value pairs by name, and then value if equal,
-            concatenating them into a single string. This string should be encoded
-            prior to, or after normalization is run.
-            </summary>
-            <seealso cref="!:http://oauth.net/core/1.0#rfc.section.9.1.1"/>
-            <param name="parameters"></param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.SortParametersExcludingSignature(RestSharp.Authenticators.OAuth.WebParameterCollection)">
-            <summary>
-            Sorts a <see cref="T:RestSharp.Authenticators.OAuth.WebParameterCollection"/> by name, and then value if equal.
-            </summary>
-            <param name="parameters">A collection of parameters to sort</param>
-            <returns>A sorted parameter collection</returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.ConstructRequestUrl(System.Uri)">
-            <summary>
-            Creates a request URL suitable for making OAuth requests.
-            Resulting URLs must exclude port 80 or port 443 when accompanied by HTTP and HTTPS, respectively.
-            Resulting URLs must be lower case.
-            </summary>
-            <seealso cref="!:http://oauth.net/core/1.0#rfc.section.9.1.2"/>
-            <param name="url">The original request URL</param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.ConcatenateRequestElements(System.String,System.String,RestSharp.Authenticators.OAuth.WebParameterCollection)">
-            <summary>
-            Creates a request elements concatentation value to send with a request. 
-            This is also known as the signature base.
-            </summary>
-            <seealso cref="!:http://oauth.net/core/1.0#rfc.section.9.1.3"/>
-            <seealso cref="!:http://oauth.net/core/1.0#sig_base_example"/>
-            <param name="method">The request's HTTP method type</param>
-            <param name="url">The request URL</param>
-            <param name="parameters">The request's parameters</param>
-            <returns>A signature base string</returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.GetSignature(RestSharp.Authenticators.OAuth.OAuthSignatureMethod,System.String,System.String)">
-            <summary>
-            Creates a signature value given a signature base and the consumer secret.
-            This method is used when the token secret is currently unknown.
-            </summary>
-            <seealso cref="!:http://oauth.net/core/1.0#rfc.section.9.2"/>
-            <param name="signatureMethod">The hashing method</param>
-            <param name="signatureBase">The signature base</param>
-            <param name="consumerSecret">The consumer key</param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.GetSignature(RestSharp.Authenticators.OAuth.OAuthSignatureMethod,RestSharp.Authenticators.OAuth.OAuthSignatureTreatment,System.String,System.String)">
-            <summary>
-            Creates a signature value given a signature base and the consumer secret.
-            This method is used when the token secret is currently unknown.
-            </summary>
-            <seealso cref="!:http://oauth.net/core/1.0#rfc.section.9.2"/>
-            <param name="signatureMethod">The hashing method</param>
-            <param name="signatureTreatment">The treatment to use on a signature value</param>
-            <param name="signatureBase">The signature base</param>
-            <param name="consumerSecret">The consumer key</param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.GetSignature(RestSharp.Authenticators.OAuth.OAuthSignatureMethod,System.String,System.String,System.String)">
-            <summary>
-            Creates a signature value given a signature base and the consumer secret and a known token secret.
-            </summary>
-            <seealso cref="!:http://oauth.net/core/1.0#rfc.section.9.2"/>
-            <param name="signatureMethod">The hashing method</param>
-            <param name="signatureBase">The signature base</param>
-            <param name="consumerSecret">The consumer secret</param>
-            <param name="tokenSecret">The token secret</param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthTools.GetSignature(RestSharp.Authenticators.OAuth.OAuthSignatureMethod,RestSharp.Authenticators.OAuth.OAuthSignatureTreatment,System.String,System.String,System.String)">
-            <summary>
-            Creates a signature value given a signature base and the consumer secret and a known token secret.
-            </summary>
-            <seealso cref="!:http://oauth.net/core/1.0#rfc.section.9.2"/>
-            <param name="signatureMethod">The hashing method</param>
-            <param name="signatureTreatment">The treatment to use on a signature value</param>
-            <param name="signatureBase">The signature base</param>
-            <param name="consumerSecret">The consumer secret</param>
-            <param name="tokenSecret">The token secret</param>
-            <returns></returns>
-        </member>
-        <member name="T:RestSharp.Authenticators.OAuth.OAuthWorkflow">
-            <summary>
-            A class to encapsulate OAuth authentication flow.
-            <seealso cref="!:http://oauth.net/core/1.0#anchor9"/>
-            </summary>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthWorkflow.BuildRequestTokenInfo(System.String)">
-            <summary>
-            Generates a <see cref="T:RestSharp.Authenticators.OAuth.OAuthWebQueryInfo"/> instance to pass to an
-            <see cref="T:RestSharp.IAuthenticator"/> for the purpose of requesting an
-            unauthorized request token.
-            </summary>
-            <param name="method">The HTTP method for the intended request</param>
-            <seealso cref="!:http://oauth.net/core/1.0#anchor9"/>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthWorkflow.BuildRequestTokenInfo(System.String,RestSharp.Authenticators.OAuth.WebParameterCollection)">
-            <summary>
-            Generates a <see cref="T:RestSharp.Authenticators.OAuth.OAuthWebQueryInfo"/> instance to pass to an
-            <see cref="T:RestSharp.IAuthenticator"/> for the purpose of requesting an
-            unauthorized request token.
-            </summary>
-            <param name="method">The HTTP method for the intended request</param>
-            <param name="parameters">Any existing, non-OAuth query parameters desired in the request</param>
-            <seealso cref="!:http://oauth.net/core/1.0#anchor9"/>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthWorkflow.BuildAccessTokenInfo(System.String)">
-            <summary>
-            Generates a <see cref="T:RestSharp.Authenticators.OAuth.OAuthWebQueryInfo"/> instance to pass to an
-            <see cref="T:RestSharp.IAuthenticator"/> for the purpose of exchanging a request token
-            for an access token authorized by the user at the Service Provider site.
-            </summary>
-            <param name="method">The HTTP method for the intended request</param>
-            <seealso cref="!:http://oauth.net/core/1.0#anchor9"/>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthWorkflow.BuildAccessTokenInfo(System.String,RestSharp.Authenticators.OAuth.WebParameterCollection)">
-            <summary>
-            Generates a <see cref="T:RestSharp.Authenticators.OAuth.OAuthWebQueryInfo"/> instance to pass to an
-            <see cref="T:RestSharp.IAuthenticator"/> for the purpose of exchanging a request token
-            for an access token authorized by the user at the Service Provider site.
-            </summary>
-            <param name="method">The HTTP method for the intended request</param>
-            <seealso cref="!:http://oauth.net/core/1.0#anchor9"/>
-            <param name="parameters">Any existing, non-OAuth query parameters desired in the request</param>
-        </member>
-        <member name="M:RestSharp.Authenticators.OAuth.OAuthWorkflow.BuildClientAuthAccessTokenInfo(System.String,RestSharp.Authenticators.OAuth.WebParameterCollection)">
-            <summary>
-            Generates a <see cref="T:RestSharp.Authenticators.OAuth.OAuthWebQueryInfo"/> instance to pass to an
-            <see cref="T:RestSharp.IAuthenticator"/> for the purpose of exchanging user credentials
-            for an access token authorized by the user at the Service Provider site.
-            </summary>
-            <param name="method">The HTTP method for the intended request</param>
-            <seealso cref="!:http://tools.ietf.org/html/draft-dehora-farrell-oauth-accesstoken-creds-00#section-4"/>
-            <param name="parameters">Any existing, non-OAuth query parameters desired in the request</param>
-        </member>
-        <member name="P:RestSharp.Authenticators.OAuth.OAuthWorkflow.RequestTokenUrl">
-            <seealso cref="!:http://oauth.net/core/1.0#request_urls"/>
-        </member>
-        <member name="P:RestSharp.Authenticators.OAuth.OAuthWorkflow.AccessTokenUrl">
-            <seealso cref="!:http://oauth.net/core/1.0#request_urls"/>
-        </member>
-        <member name="P:RestSharp.Authenticators.OAuth.OAuthWorkflow.AuthorizationUrl">
-            <seealso cref="!:http://oauth.net/core/1.0#request_urls"/>
-        </member>
-        <member name="T:RestSharp.Compression.ZLib.CRC32">
-            <summary>
-            Calculates a 32bit Cyclic Redundancy Checksum (CRC) using the same polynomial
-            used by Zip. This type is used internally by DotNetZip; it is generally not used
-            directly by applications wishing to create, read, or manipulate zip archive
-            files.
-            </summary>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CRC32.GetCrc32(System.IO.Stream)">
-            <summary>
-            Returns the CRC32 for the specified stream.
-            </summary>
-            <param name="input">The stream over which to calculate the CRC32</param>
-            <returns>the CRC32 calculation</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CRC32.GetCrc32AndCopy(System.IO.Stream,System.IO.Stream)">
-            <summary>
-            Returns the CRC32 for the specified stream, and writes the input into the
-            output stream.
-            </summary>
-            <param name="input">The stream over which to calculate the CRC32</param>
-            <param name="output">The stream into which to deflate the input</param>
-            <returns>the CRC32 calculation</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CRC32.ComputeCrc32(System.Int32,System.Byte)">
-            <summary>
-            Get the CRC32 for the given (word,byte) combo.  This is a computation
-            defined by PKzip.
-            </summary>
-            <param name="W">The word to start with.</param>
-            <param name="B">The byte to combine it with.</param>
-            <returns>The CRC-ized result.</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CRC32.SlurpBlock(System.Byte[],System.Int32,System.Int32)">
-            <summary>
-            Update the value for the running CRC32 using the given block of bytes.
-            This is useful when using the CRC32() class in a Stream.
-            </summary>
-            <param name="block">block of bytes to slurp</param>
-            <param name="offset">starting point in the block</param>
-            <param name="count">how many bytes within the block to slurp</param>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.CRC32.TotalBytesRead">
-            <summary>
-            indicates the total number of bytes read on the CRC stream.
-            This is used when writing the ZipDirEntry when compressing files.
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.CRC32.Crc32Result">
-            <summary>
-            Indicates the current CRC for all blocks slurped in.
-            </summary>
-        </member>
-        <member name="T:RestSharp.Compression.ZLib.CrcCalculatorStream">
-             <summary>
-             A Stream that calculates a CRC32 (a checksum) on all bytes read, 
-             or on all bytes written.
-             </summary>
-            
-             <remarks>
-             <para>
-             This class can be used to verify the CRC of a ZipEntry when
-             reading from a stream, or to calculate a CRC when writing to a
-             stream.  The stream should be used to either read, or write, but
-             not both.  If you intermix reads and writes, the results are not
-             defined.
-             </para>
-             
-             <para>
-             This class is intended primarily for use internally by the
-             DotNetZip library.
-             </para>
-             </remarks>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CrcCalculatorStream.#ctor(System.IO.Stream)">
-            <summary>
-            The default constructor.
-            </summary>
-            <remarks>
-            Instances returned from this constructor will leave the underlying stream
-            open upon Close().
-            </remarks>
-            <param name="stream">The underlying stream</param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CrcCalculatorStream.#ctor(System.IO.Stream,System.Boolean)">
-            <summary>
-            The constructor allows the caller to specify how to handle the underlying
-            stream at close.
-            </summary>
-            <param name="stream">The underlying stream</param>
-            <param name="leaveOpen">true to leave the underlying stream 
-            open upon close of the CrcCalculatorStream.; false otherwise.</param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CrcCalculatorStream.#ctor(System.IO.Stream,System.Int64)">
-            <summary>
-            A constructor allowing the specification of the length of the stream to read.
-            </summary>
-            <remarks>
-            Instances returned from this constructor will leave the underlying stream open
-            upon Close().
-            </remarks>
-            <param name="stream">The underlying stream</param>
-            <param name="length">The length of the stream to slurp</param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CrcCalculatorStream.#ctor(System.IO.Stream,System.Int64,System.Boolean)">
-            <summary>
-            A constructor allowing the specification of the length of the stream to
-            read, as well as whether to keep the underlying stream open upon Close().
-            </summary>
-            <param name="stream">The underlying stream</param>
-            <param name="length">The length of the stream to slurp</param>
-            <param name="leaveOpen">true to leave the underlying stream 
-            open upon close of the CrcCalculatorStream.; false otherwise.</param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CrcCalculatorStream.Read(System.Byte[],System.Int32,System.Int32)">
-            <summary>
-            Read from the stream
-            </summary>
-            <param name="buffer">the buffer to read</param>
-            <param name="offset">the offset at which to start</param>
-            <param name="count">the number of bytes to read</param>
-            <returns>the number of bytes actually read</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CrcCalculatorStream.Write(System.Byte[],System.Int32,System.Int32)">
-            <summary>
-            Write to the stream. 
-            </summary>
-            <param name="buffer">the buffer from which to write</param>
-            <param name="offset">the offset at which to start writing</param>
-            <param name="count">the number of bytes to write</param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CrcCalculatorStream.Flush">
-            <summary>
-            Flush the stream.
-            </summary>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CrcCalculatorStream.Seek(System.Int64,System.IO.SeekOrigin)">
-            <summary>
-            Not implemented.
-            </summary>
-            <param name="offset">N/A</param>
-            <param name="origin">N/A</param>
-            <returns>N/A</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CrcCalculatorStream.SetLength(System.Int64)">
-            <summary>
-            Not implemented.
-            </summary>
-            <param name="value">N/A</param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.CrcCalculatorStream.Close">
-            <summary>
-            Closes the stream.
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.CrcCalculatorStream.TotalBytesSlurped">
-             <summary>
-             Gets the total number of bytes run through the CRC32 calculator.
-             </summary>
-            
-             <remarks>
-             This is either the total number of bytes read, or the total number of bytes
-             written, depending on the direction of this stream.
-             </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.CrcCalculatorStream.Crc">
-            <summary>
-            Provides the current CRC for all blocks slurped in.
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.CrcCalculatorStream.LeaveOpen">
-            <summary>
-            Indicates whether the underlying stream will be left open when the
-            CrcCalculatorStream is Closed.
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.CrcCalculatorStream.CanRead">
-            <summary>
-            Indicates whether the stream supports reading. 
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.CrcCalculatorStream.CanSeek">
-            <summary>
-            Indicates whether the stream supports seeking. 
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.CrcCalculatorStream.CanWrite">
-            <summary>
-            Indicates whether the stream supports writing. 
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.CrcCalculatorStream.Length">
-            <summary>
-            Not implemented.
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.CrcCalculatorStream.Position">
-            <summary>
-            Not implemented.
-            </summary>
-        </member>
-        <member name="T:RestSharp.Compression.ZLib.FlushType">
-            <summary>
-            Describes how to flush the current deflate operation. 
-            </summary>
-            <remarks>
-            The different FlushType values are useful when using a Deflate in a streaming application.
-            </remarks>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.FlushType.None">
-            <summary>No flush at all.</summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.FlushType.Partial">
-            <summary>Closes the current block, but doesn't flush it to
-            the output. Used internally only in hypothetical
-            scenarios.  This was supposed to be removed by Zlib, but it is
-            still in use in some edge cases. 
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.FlushType.Sync">
-            <summary>
-            Use this during compression to specify that all pending output should be
-            flushed to the output buffer and the output should be aligned on a byte
-            boundary.  You might use this in a streaming communication scenario, so that
-            the decompressor can get all input data available so far.  When using this
-            with a ZlibCodec, <c>AvailableBytesIn</c> will be zero after the call if
-            enough output space has been provided before the call.  Flushing will
-            degrade compression and so it should be used only when necessary.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.FlushType.Full">
-            <summary>
-            Use this during compression to specify that all output should be flushed, as
-            with <c>FlushType.Sync</c>, but also, the compression state should be reset
-            so that decompression can restart from this point if previous compressed
-            data has been damaged or if random access is desired.  Using
-            <c>FlushType.Full</c> too often can significantly degrade the compression.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.FlushType.Finish">
-            <summary>Signals the end of the compression/decompression stream.</summary>
-        </member>
-        <member name="T:RestSharp.Compression.ZLib.GZipStream">
-             <summary>
-             A class for compressing and decompressing GZIP streams.
-             </summary>
-             <remarks>
-            
-             <para>
-             The GZipStream is a <see href="http://en.wikipedia.org/wiki/Decorator_pattern">Decorator</see> on a <see cref="T:System.IO.Stream"/>.  It adds GZIP compression or decompression to any stream.
-             </para>
-            
-             <para> Like the <c>Compression.GZipStream</c> in the .NET Base
-             Class Library, the Ionic.Zlib.GZipStream can compress while writing, or decompress
-             while reading, but not vice versa.  The compression method used is GZIP, which is
-             documented in <see href="http://www.ietf.org/rfc/rfc1952.txt">IETF RFC 1952</see>,
-             "GZIP file format specification version 4.3".</para>
-            
-             <para> A GZipStream can be used to decompress data (through Read()) or to compress
-             data (through Write()), but not both.  </para>
-            
-             <para> If you wish to use the GZipStream to compress data, you must wrap it around a
-             write-able stream. As you call Write() on the GZipStream, the data will be
-             compressed into the GZIP format.  If you want to decompress data, you must wrap the
-             GZipStream around a readable stream that contains an IETF RFC 1952-compliant stream.
-             The data will be decompressed as you call Read() on the GZipStream.  </para>
-            
-             <para> Though the GZIP format allows data from multiple files to be concatenated
-             together, this stream handles only a single segment of GZIP format, typically
-             representing a single file.  </para>
-            
-             <para>
-             This class is similar to <see cref="T:RestSharp.Compression.ZLib.ZlibStream"/> and <see cref="!:DeflateStream"/>.
-             <c>ZlibStream</c> handles RFC1950-compliant streams.  <see cref="!:DeflateStream"/>
-             handles RFC1951-compliant streams. This class handles RFC1952-compliant streams.
-             </para>
-            
-             </remarks>
-            
-             <seealso cref="!:DeflateStream"/>
-             <seealso cref="T:RestSharp.Compression.ZLib.ZlibStream"/>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.GZipStream.LastModified">
-             <summary>
-             The last modified time for the GZIP stream.
-             </summary>
-            
-             <remarks> GZIP allows the storage of a last modified time with each GZIP entry.
-             When compressing data, you can set this before the first call to Write().  When
-             decompressing, you can retrieve this value any time after the first call to
-             Read().  </remarks>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.GZipStream.#ctor(System.IO.Stream)">
-            <summary>
-            Create a GZipStream using the specified CompressionMode and the specified CompressionLevel,
-            and explicitly specify whether the stream should be left open after Deflation or Inflation.
-            </summary>
-            <remarks>
-            <para>
-            This constructor allows the application to request that the captive stream remain open after
-            the deflation or inflation occurs.  By default, after Close() is called on the stream, the 
-            captive stream is also closed. In some cases this is not desired, for example if the stream 
-            is a memory stream that will be re-read after compressed data has been written to it.  Specify true for the 
-            leaveOpen parameter to leave the stream open. 
-            </para>
-            <para>
-            As noted in the class documentation, 
-            the CompressionMode (Compress or Decompress) also establishes the "direction" of the stream.  
-            A GZipStream with CompressionMode.Compress works only through Write().  A GZipStream with 
-            CompressionMode.Decompress works only through Read().
-            </para>
-            </remarks>
-            <example>
-            This example shows how to use a DeflateStream to compress data.
-            <code>
-            using (System.IO.Stream input = System.IO.File.OpenRead(fileToCompress))
-            {
-                using (var raw = System.IO.File.Create(outputFile))
-                {
-                    using (Stream compressor = new GZipStream(raw, CompressionMode.Compress, CompressionLevel.BestCompression, true))
-                    {
-                        byte[] buffer = new byte[WORKING_BUFFER_SIZE];
-                        int n;
-                        while ((n= input.Read(buffer, 0, buffer.Length)) != 0)
-                        {
-                            compressor.Write(buffer, 0, n);
-                        }
-                    }
-                }
-            }
-            </code>
-            <code lang="VB">
-            Dim outputFile As String = (fileToCompress &amp; ".compressed")
-            Using input As Stream = File.OpenRead(fileToCompress)
-                Using raw As FileStream = File.Create(outputFile)
-                Using compressor As Stream = New GZipStream(raw, CompressionMode.Compress, CompressionLevel.BestCompression, True)
-                    Dim buffer As Byte() = New Byte(4096) {}
-                    Dim n As Integer = -1
-                    Do While (n &lt;&gt; 0)
-                        If (n &gt; 0) Then
-                            compressor.Write(buffer, 0, n)
-                        End If
-                        n = input.Read(buffer, 0, buffer.Length)
-                    Loop
-                End Using
-                End Using
-            End Using
-            </code>
-            </example>
-            <param name="stream">The stream which will be read or written.</param>
-            <param name="mode">Indicates whether the GZipStream will compress or decompress.</param>
-            <param name="leaveOpen">true if the application would like the stream to remain open after inflation/deflation.</param>
-            <param name="level">A tuning knob to trade speed for effectiveness.</param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.GZipStream.Dispose(System.Boolean)">
-            <summary>
-            Dispose the stream.  
-            </summary>
-            <remarks>
-            This may or may not result in a Close() call on the captive stream. 
-            See the ctor's with leaveOpen parameters for more information.
-            </remarks>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.GZipStream.Flush">
-            <summary>
-            Flush the stream.
-            </summary>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.GZipStream.Read(System.Byte[],System.Int32,System.Int32)">
-            <summary>
-            Read and decompress data from the source stream.
-            </summary>
-            <remarks>
-            With a GZipStream, decompression is done through reading.
-            </remarks>
-            <example>
-            <code>
-            byte[] working = new byte[WORKING_BUFFER_SIZE];
-            using (System.IO.Stream input = System.IO.File.OpenRead(_CompressedFile))
-            {
-                using (Stream decompressor= new Ionic.Zlib.GZipStream(input, CompressionMode.Decompress, true))
-                {
-                    using (var output = System.IO.File.Create(_DecompressedFile))
-                    {
-                        int n;
-                        while ((n= decompressor.Read(working, 0, working.Length)) !=0)
-                        {
-                            output.Write(working, 0, n);
-                        }
-                    }
-                }
-            }
-            </code>
-            </example>
-            <param name="buffer">The buffer into which the decompressed data should be placed.</param>
-            <param name="offset">the offset within that data array to put the first byte read.</param>
-            <param name="count">the number of bytes to read.</param>
-            <returns>the number of bytes actually read</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.GZipStream.Seek(System.Int64,System.IO.SeekOrigin)">
-            <summary>
-            Calling this method always throws a <see cref="T:System.NotImplementedException"/>.
-            </summary>
-            <param name="offset">irrelevant; it will always throw!</param>
-            <param name="origin">irrelevant; it will always throw!</param>
-            <returns>irrelevant!</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.GZipStream.SetLength(System.Int64)">
-            <summary>
-            Calling this method always throws a NotImplementedException.
-            </summary>
-            <param name="value">irrelevant; this method will always throw!</param>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.Comment">
-             <summary>
-             The Comment on the GZIP stream.
-             </summary>
-             <remarks>
-             <para>
-             The GZIP format allows for each file to optionally have an associated comment stored with the
-             file.  The comment is encoded with the ISO-8859-1 code page.  To include a comment in
-             a GZIP stream you create, set this property before calling Write() for the first time
-             on the GZipStream.  
-             </para>
-            
-             <para>
-             When using GZipStream to decompress, you can retrieve this property after the first
-             call to Read().  If no comment has been set in the GZIP bytestream, the Comment
-             property will return null (Nothing in VB).
-             </para>
-             </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.FileName">
-            <summary>
-            The FileName for the GZIP stream.
-            </summary>
-            <remarks>
-            <para>
-            The GZIP format optionally allows each file to have an associated filename.  When
-            compressing data (through Write()), set this FileName before calling Write() the first
-            time on the GZipStream.  The actual filename is encoded into the GZIP bytestream with
-            the ISO-8859-1 code page, according to RFC 1952. It is the application's responsibility to 
-            insure that the FileName can be encoded and decoded correctly with this code page. 
-            </para>
-            <para>
-            When decompressing (through Read()), you can retrieve this value any time after the
-            first Read().  In the case where there was no filename encoded into the GZIP
-            bytestream, the property will return null (Nothing in VB).
-            </para>
-            </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.Crc32">
-            <summary>
-            The CRC on the GZIP stream. 
-            </summary>
-            <remarks>
-            This is used for internal error checking. You probably don't need to look at this property.
-            </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.FlushMode">
-            <summary>
-            This property sets the flush behavior on the stream.  
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.BufferSize">
-             <summary>
-             The size of the working buffer for the compression codec. 
-             </summary>
-            
-             <remarks>
-             <para>
-             The working buffer is used for all stream operations.  The default size is 1024 bytes.
-             The minimum size is 128 bytes. You may get better performance with a larger buffer.
-             Then again, you might not.  You would have to test it.
-             </para>
-            
-             <para>
-             Set this before the first call to Read()  or Write() on the stream. If you try to set it 
-             afterwards, it will throw.
-             </para>
-             </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.TotalIn">
-            <summary> Returns the total number of bytes input so far.</summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.TotalOut">
-            <summary> Returns the total number of bytes output so far.</summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.CanRead">
-            <summary>
-            Indicates whether the stream can be read.
-            </summary>
-            <remarks>
-            The return value depends on whether the captive stream supports reading.
-            </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.CanSeek">
-            <summary>
-            Indicates whether the stream supports Seek operations.
-            </summary>
-            <remarks>
-            Always returns false.
-            </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.CanWrite">
-            <summary>
-            Indicates whether the stream can be written.
-            </summary>
-            <remarks>
-            The return value depends on whether the captive stream supports writing.
-            </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.Length">
-            <summary>
-            Reading this property always throws a NotImplementedException.
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.GZipStream.Position">
-            <summary>
-            The position of the stream pointer. 
-            </summary>
-            <remarks>
-            Writing this property always throws a NotImplementedException. Reading will
-            return the total bytes written out, if used in writing, or the total bytes 
-            read in, if used in reading.   The count may refer to compressed bytes or 
-            uncompressed bytes, depending on how you've used the stream.
-            </remarks>
-        </member>
-        <member name="T:RestSharp.Compression.ZLib.ZlibException">
-            <summary>
-            A general purpose exception class for exceptions in the Zlib library.
-            </summary>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibException.#ctor">
-            <summary>
-            The ZlibException class captures exception information generated
-            by the Zlib library. 
-            </summary>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibException.#ctor(System.String)">
-            <summary>
-            This ctor collects a message attached to the exception.
-            </summary>
-            <param name="s"></param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.SharedUtils.URShift(System.Int32,System.Int32)">
-            <summary>
-            Performs an unsigned bitwise right shift with the specified number
-            </summary>
-            <param name="number">Number to operate on</param>
-            <param name="bits">Ammount of bits to shift</param>
-            <returns>The resulting number from the shift operation</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.SharedUtils.URShift(System.Int64,System.Int32)">
-            <summary>
-            Performs an unsigned bitwise right shift with the specified number
-            </summary>
-            <param name="number">Number to operate on</param>
-            <param name="bits">Ammount of bits to shift</param>
-            <returns>The resulting number from the shift operation</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.SharedUtils.ReadInput(System.IO.TextReader,System.Byte[],System.Int32,System.Int32)">
-            <summary>Reads a number of characters from the current source TextReader and writes the data to the target array at the specified index.</summary>
-            <param name="sourceTextReader">The source TextReader to read from</param>
-            <param name="target">Contains the array of characteres read from the source TextReader.</param>
-            <param name="start">The starting index of the target array.</param>
-            <param name="count">The maximum number of characters to read from the source TextReader.</param>
-            <returns>The number of characters read. The number will be less than or equal to count depending on the data available in the source TextReader. Returns -1 if the end of the stream is reached.</returns>
-        </member>
-        <member name="T:RestSharp.Compression.ZLib.Adler">
-            <summary>
-            Computes an Adler-32 checksum. 
-            </summary>
-            <remarks>
-            The Adler checksum is similar to a CRC checksum, but faster to compute, though less
-            reliable.  It is used in producing RFC1950 compressed streams.  The Adler checksum
-            is a required part of the "ZLIB" standard.  Applications will almost never need to
-            use this class directly.
-            </remarks>
-        </member>
-        <member name="T:RestSharp.Compression.ZLib.ZlibCodec">
-             <summary>
-             Encoder and Decoder for ZLIB and DEFLATE (IETF RFC1950 and RFC1951).
-             </summary>
-            
-             <remarks>
-             This class compresses and decompresses data according to the Deflate algorithm
-             and optionally, the ZLIB format, as documented in <see
-             href="http://www.ietf.org/rfc/rfc1950.txt">RFC 1950 - ZLIB</see> and <see
-             href="http://www.ietf.org/rfc/rfc1951.txt">RFC 1951 - DEFLATE</see>.
-             </remarks>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibCodec.InputBuffer">
-            <summary>
-            The buffer from which data is taken.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibCodec.NextIn">
-            <summary>
-            An index into the InputBuffer array, indicating where to start reading. 
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibCodec.AvailableBytesIn">
-            <summary>
-            The number of bytes available in the InputBuffer, starting at NextIn. 
-            </summary>
-            <remarks>
-            Generally you should set this to InputBuffer.Length before the first Inflate() or Deflate() call. 
-            The class will update this number as calls to Inflate/Deflate are made.
-            </remarks>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibCodec.TotalBytesIn">
-            <summary>
-            Total number of bytes read so far, through all calls to Inflate()/Deflate().
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibCodec.OutputBuffer">
-            <summary>
-            Buffer to store output data.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibCodec.NextOut">
-            <summary>
-            An index into the OutputBuffer array, indicating where to start writing. 
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibCodec.AvailableBytesOut">
-            <summary>
-            The number of bytes available in the OutputBuffer, starting at NextOut. 
-            </summary>
-            <remarks>
-            Generally you should set this to OutputBuffer.Length before the first Inflate() or Deflate() call. 
-            The class will update this number as calls to Inflate/Deflate are made.
-            </remarks>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibCodec.TotalBytesOut">
-            <summary>
-            Total number of bytes written to the output so far, through all calls to Inflate()/Deflate().
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibCodec.Message">
-            <summary>
-            used for diagnostics, when something goes wrong!
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibCodec.WindowBits">
-            <summary>
-            The number of Window Bits to use.  
-            </summary>
-            <remarks>
-            This gauges the size of the sliding window, and hence the 
-            compression effectiveness as well as memory consumption. It's best to just leave this 
-            setting alone if you don't know what it is.  The maximum value is 15 bits, which implies
-            a 32k window.  
-            </remarks>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibCodec.#ctor">
-            <summary>
-            Create a ZlibCodec that decompresses.
-            </summary>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibCodec.InitializeInflate">
-            <summary>
-            Initialize the inflation state. 
-            </summary>
-            <remarks>
-            It is not necessary to call this before using the ZlibCodec to inflate data; 
-            It is implicitly called when you call the constructor.
-            </remarks>
-            <returns>Z_OK if everything goes well.</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibCodec.InitializeInflate(System.Boolean)">
-             <summary>
-             Initialize the inflation state with an explicit flag to
-             govern the handling of RFC1950 header bytes.
-             </summary>
-            
-             <remarks>
-             By default, the ZLIB header defined in <see
-             href="http://www.ietf.org/rfc/rfc1950.txt">RFC 1950</see> is expected.  If
-             you want to read a zlib stream you should specify true for
-             expectRfc1950Header.  If you have a deflate stream, you will want to specify
-             false. It is only necessary to invoke this initializer explicitly if you
-             want to specify false.
-             </remarks>
-            
-             <param name="expectRfc1950Header">whether to expect an RFC1950 header byte
-             pair when reading the stream of data to be inflated.</param>
-            
-             <returns>Z_OK if everything goes well.</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibCodec.InitializeInflate(System.Int32)">
-            <summary>
-            Initialize the ZlibCodec for inflation, with the specified number of window bits. 
-            </summary>
-            <param name="windowBits">The number of window bits to use. If you need to ask what that is, 
-            then you shouldn't be calling this initializer.</param>
-            <returns>Z_OK if all goes well.</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibCodec.InitializeInflate(System.Int32,System.Boolean)">
-             <summary>
-             Initialize the inflation state with an explicit flag to govern the handling of
-             RFC1950 header bytes. 
-             </summary>
-            
-             <remarks>
-             If you want to read a zlib stream you should specify true for
-             expectRfc1950Header. In this case, the library will expect to find a ZLIB
-             header, as defined in <see href="http://www.ietf.org/rfc/rfc1950.txt">RFC
-             1950</see>, in the compressed stream.  If you will be reading a DEFLATE or
-             GZIP stream, which does not have such a header, you will want to specify
-             false.
-             </remarks>
-            
-             <param name="expectRfc1950Header">whether to expect an RFC1950 header byte pair when reading 
-             the stream of data to be inflated.</param>
-             <param name="windowBits">The number of window bits to use. If you need to ask what that is, 
-             then you shouldn't be calling this initializer.</param>
-             <returns>Z_OK if everything goes well.</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibCodec.Inflate(RestSharp.Compression.ZLib.FlushType)">
-             <summary>
-             Inflate the data in the InputBuffer, placing the result in the OutputBuffer.
-             </summary>
-             <remarks>
-             You must have set InputBuffer and OutputBuffer, NextIn and NextOut, and AvailableBytesIn and 
-             AvailableBytesOut  before calling this method.
-             </remarks>
-             <example>
-             <code>
-             private void InflateBuffer()
-             {
-                 int bufferSize = 1024;
-                 byte[] buffer = new byte[bufferSize];
-                 ZlibCodec decompressor = new ZlibCodec();
-             
-                 Console.WriteLine("\n============================================");
-                 Console.WriteLine("Size of Buffer to Inflate: {0} bytes.", CompressedBytes.Length);
-                 MemoryStream ms = new MemoryStream(DecompressedBytes);
-             
-                 int rc = decompressor.InitializeInflate();
-             
-                 decompressor.InputBuffer = CompressedBytes;
-                 decompressor.NextIn = 0;
-                 decompressor.AvailableBytesIn = CompressedBytes.Length;
-             
-                 decompressor.OutputBuffer = buffer;
-             
-                 // pass 1: inflate 
-                 do
-                 {
-                     decompressor.NextOut = 0;
-                     decompressor.AvailableBytesOut = buffer.Length;
-                     rc = decompressor.Inflate(ZlibConstants.Z_NO_FLUSH);
-             
-                     if (rc != ZlibConstants.Z_OK &amp;&amp; rc != ZlibConstants.Z_STREAM_END)
-                         throw new Exception("inflating: " + decompressor.Message);
-             
-                     ms.Write(decompressor.OutputBuffer, 0, buffer.Length - decompressor.AvailableBytesOut);
-                 }
-                 while (decompressor.AvailableBytesIn &gt; 0 || decompressor.AvailableBytesOut == 0);
-             
-                 // pass 2: finish and flush
-                 do
-                 {
-                     decompressor.NextOut = 0;
-                     decompressor.AvailableBytesOut = buffer.Length;
-                     rc = decompressor.Inflate(ZlibConstants.Z_FINISH);
-             
-                     if (rc != ZlibConstants.Z_STREAM_END &amp;&amp; rc != ZlibConstants.Z_OK)
-                         throw new Exception("inflating: " + decompressor.Message);
-             
-                     if (buffer.Length - decompressor.AvailableBytesOut &gt; 0)
-                         ms.Write(buffer, 0, buffer.Length - decompressor.AvailableBytesOut);
-                 }
-                 while (decompressor.AvailableBytesIn &gt; 0 || decompressor.AvailableBytesOut == 0);
-             
-                 decompressor.EndInflate();
-             }
-            
-             </code>
-             </example>
-             <param name="flush">The flush to use when inflating.</param>
-             <returns>Z_OK if everything goes well.</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibCodec.EndInflate">
-            <summary>
-            Ends an inflation session. 
-            </summary>
-            <remarks>
-            Call this after successively calling Inflate().  This will cause all buffers to be flushed. 
-            After calling this you cannot call Inflate() without a intervening call to one of the
-            InitializeInflate() overloads.
-            </remarks>
-            <returns>Z_OK if everything goes well.</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibCodec.SyncInflate">
-            <summary>
-            I don't know what this does!
-            </summary>
-            <returns>Z_OK if everything goes well.</returns>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibCodec.SetDictionary(System.Byte[])">
-            <summary>
-            Set the dictionary to be used for either Inflation or Deflation.
-            </summary>
-            <param name="dictionary">The dictionary bytes to use.</param>
-            <returns>Z_OK if all goes well.</returns>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.ZlibCodec.Adler32">
-            <summary>
-            The Adler32 checksum on the data transferred through the codec so far. You probably don't need to look at this.
-            </summary>
-        </member>
-        <member name="T:RestSharp.Compression.ZLib.ZlibConstants">
-            <summary>
-            A bunch of constants used in the Zlib interface.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibConstants.WindowBitsMax">
-            <summary>
-            The maximum number of window bits for the Deflate algorithm.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibConstants.WindowBitsDefault">
-            <summary>
-            The default number of window bits for the Deflate algorithm.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibConstants.Z_OK">
-            <summary>
-            indicates everything is A-OK
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibConstants.Z_STREAM_END">
-            <summary>
-            Indicates that the last operation reached the end of the stream.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibConstants.Z_NEED_DICT">
-            <summary>
-            The operation ended in need of a dictionary. 
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibConstants.Z_STREAM_ERROR">
-            <summary>
-            There was an error with the stream - not enough data, not open and readable, etc.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibConstants.Z_DATA_ERROR">
-            <summary>
-            There was an error with the data - not enough data, bad data, etc.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibConstants.Z_BUF_ERROR">
-            <summary>
-            There was an error with the working buffer.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibConstants.WorkingBufferSizeDefault">
-            <summary>
-            The size of the working buffer used in the ZlibCodec class. Defaults to 8192 bytes.
-            </summary>
-        </member>
-        <member name="F:RestSharp.Compression.ZLib.ZlibConstants.WorkingBufferSizeMin">
-            <summary>
-            The minimum size of the working buffer used in the ZlibCodec class.  Currently it is 128 bytes.
-            </summary>
-        </member>
-        <member name="T:RestSharp.Compression.ZLib.ZlibStream">
-             <summary>
-             Represents a Zlib stream for compression or decompression.
-             </summary>
-             <remarks>
-            
-             <para>
-             The ZlibStream is a <see href="http://en.wikipedia.org/wiki/Decorator_pattern">Decorator</see> on a <see cref="T:System.IO.Stream"/>.  It adds ZLIB compression or decompression to any
-             stream.
-             </para>
-            
-             <para> Using this stream, applications can compress or decompress data via
-             stream <c>Read</c> and <c>Write</c> operations.  Either compresssion or
-             decompression can occur through either reading or writing. The compression
-             format used is ZLIB, which is documented in <see href="http://www.ietf.org/rfc/rfc1950.txt">IETF RFC 1950</see>, "ZLIB Compressed
-             Data Format Specification version 3.3". This implementation of ZLIB always uses
-             DEFLATE as the compression method.  (see <see href="http://www.ietf.org/rfc/rfc1951.txt">IETF RFC 1951</see>, "DEFLATE
-             Compressed Data Format Specification version 1.3.") </para>
-            
-             <para>
-             The ZLIB format allows for varying compression methods, window sizes, and dictionaries.
-             This implementation always uses the DEFLATE compression method, a preset dictionary,
-             and 15 window bits by default.  
-             </para>
-            
-             <para>
-             This class is similar to <see cref="!:DeflateStream"/>, except that it adds the
-             RFC1950 header and trailer bytes to a compressed stream when compressing, or expects
-             the RFC1950 header and trailer bytes when decompressing.  It is also similar to the
-             <see cref="T:RestSharp.Compression.ZLib.GZipStream"/>.
-             </para>
-             </remarks>
-             <seealso cref="!:DeflateStream"/>
-             <seealso cref="T:RestSharp.Compression.ZLib.GZipStream"/>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibStream.Dispose(System.Boolean)">
-            <summary>
-            Dispose the stream.  
-            </summary>
-            <remarks>
-            This may or may not result in a Close() call on the captive stream. 
-            See the constructors that have a leaveOpen parameter for more information.
-            </remarks>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibStream.Flush">
-            <summary>
-            Flush the stream.
-            </summary>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibStream.Read(System.Byte[],System.Int32,System.Int32)">
-             <summary>
-             Read data from the stream. 
-             </summary>
-            
-             <remarks>
-            
-             <para>
-             If you wish to use the ZlibStream to compress data while reading, you can create a
-             ZlibStream with CompressionMode.Compress, providing an uncompressed data stream.  Then
-             call Read() on that ZlibStream, and the data read will be compressed.  If you wish to
-             use the ZlibStream to decompress data while reading, you can create a ZlibStream with
-             CompressionMode.Decompress, providing a readable compressed data stream.  Then call
-             Read() on that ZlibStream, and the data will be decompressed as it is read.
-             </para>
-            
-             <para>
-             A ZlibStream can be used for Read() or Write(), but not both. 
-             </para>
-             </remarks>
-             <param name="buffer">The buffer into which the read data should be placed.</param>
-             <param name="offset">the offset within that data array to put the first byte read.</param>
-             <param name="count">the number of bytes to read.</param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibStream.Seek(System.Int64,System.IO.SeekOrigin)">
-            <summary>
-            Calling this method always throws a NotImplementedException.
-            </summary>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibStream.SetLength(System.Int64)">
-            <summary>
-            Calling this method always throws a NotImplementedException.
-            </summary>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibStream.Write(System.Byte[],System.Int32,System.Int32)">
-             <summary>
-             Write data to the stream. 
-             </summary>
-            
-             <remarks>
-            
-             <para>
-             If you wish to use the ZlibStream to compress data while writing, you can create a
-             ZlibStream with CompressionMode.Compress, and a writable output stream.  Then call
-             Write() on that ZlibStream, providing uncompressed data as input.  The data sent to
-             the output stream will be the compressed form of the data written.  If you wish to use
-             the ZlibStream to decompress data while writing, you can create a ZlibStream with
-             CompressionMode.Decompress, and a writable output stream.  Then call Write() on that
-             stream, providing previously compressed data. The data sent to the output stream will
-             be the decompressed form of the data written.
-             </para>
-            
-             <para>
-             A ZlibStream can be used for Read() or Write(), but not both. 
-             </para>
-             </remarks>
-             <param name="buffer">The buffer holding data to write to the stream.</param>
-             <param name="offset">the offset within that data array to find the first byte to write.</param>
-             <param name="count">the number of bytes to write.</param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibStream.UncompressString(System.Byte[])">
-            <summary>
-            Uncompress a byte array into a single string.
-            </summary>
-            <seealso cref="!:ZlibStream.CompressString(String)"/>
-            <param name="compressed">
-            A buffer containing ZLIB-compressed data.  
-            </param>
-        </member>
-        <member name="M:RestSharp.Compression.ZLib.ZlibStream.UncompressBuffer(System.Byte[])">
-            <summary>
-            Uncompress a byte array into a byte array.
-            </summary>
-            <seealso cref="!:ZlibStream.CompressBuffer(byte[])"/>
-            <seealso cref="M:RestSharp.Compression.ZLib.ZlibStream.UncompressString(System.Byte[])"/>
-            <param name="compressed">
-            A buffer containing ZLIB-compressed data.  
-            </param>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.ZlibStream.FlushMode">
-            <summary>
-            This property sets the flush behavior on the stream.  
-            Sorry, though, not sure exactly how to describe all the various settings.
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.ZlibStream.BufferSize">
-             <summary>
-             The size of the working buffer for the compression codec. 
-             </summary>
-            
-             <remarks>
-             <para>
-             The working buffer is used for all stream operations.  The default size is 1024 bytes.
-             The minimum size is 128 bytes. You may get better performance with a larger buffer.
-             Then again, you might not.  You would have to test it.
-             </para>
-            
-             <para>
-             Set this before the first call to Read()  or Write() on the stream. If you try to set it 
-             afterwards, it will throw.
-             </para>
-             </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.ZlibStream.TotalIn">
-            <summary> Returns the total number of bytes input so far.</summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.ZlibStream.TotalOut">
-            <summary> Returns the total number of bytes output so far.</summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.ZlibStream.CanRead">
-            <summary>
-            Indicates whether the stream can be read.
-            </summary>
-            <remarks>
-            The return value depends on whether the captive stream supports reading.
-            </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.ZlibStream.CanSeek">
-            <summary>
-            Indicates whether the stream supports Seek operations.
-            </summary>
-            <remarks>
-            Always returns false.
-            </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.ZlibStream.CanWrite">
-            <summary>
-            Indicates whether the stream can be written.
-            </summary>
-            <remarks>
-            The return value depends on whether the captive stream supports writing.
-            </remarks>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.ZlibStream.Length">
-            <summary>
-            Reading this property always throws a NotImplementedException.
-            </summary>
-        </member>
-        <member name="P:RestSharp.Compression.ZLib.ZlibStream.Position">
-            <summary>
-            The position of the stream pointer. 
-            </summary>
-            <remarks>
-            Writing this property always throws a NotImplementedException. Reading will
-            return the total bytes written out, if used in writing, or the total bytes 
-            read in, if used in reading.   The count may refer to compressed bytes or 
-            uncompressed bytes, depending on how you've used the stream.
-            </remarks>
-        </member>
-        <member name="T:RestSharp.Deserializers.DeserializeAsAttribute">
-            <summary>
-            Allows control how class and property names and values are deserialized by XmlAttributeDeserializer
-            </summary>
-        </member>
-        <member name="P:RestSharp.Deserializers.DeserializeAsAttribute.Name">
-            <summary>
-            The name to use for the serialized element
-            </summary>
-        </member>
-        <member name="P:RestSharp.Deserializers.DeserializeAsAttribute.Attribute">
-            <summary>
-            Sets if the property to Deserialize is an Attribute or Element (Default: false)
-            </summary>
-        </member>
-        <member name="T:RestSharp.Deserializers.DotNetXmlDeserializer">
-            <summary>
-            Wrapper for System.Xml.Serialization.XmlSerializer.
-            </summary>
-        </member>
-        <member name="T:RestSharp.ParameterType">
-            <summary>
-             Types of parameters that can be added to requests
-            </summary>
-        </member>
-        <member name="T:RestSharp.DataFormat">
-            <summary>
-            Data formats
-            </summary>
-        </member>
-        <member name="T:RestSharp.Method">
-            <summary>
-            HTTP method to use when making requests
-            </summary>
-        </member>
-        <member name="T:RestSharp.DateFormat">
-            <summary>
-            Format strings for commonly-used date formats
-            </summary>
-        </member>
-        <member name="F:RestSharp.DateFormat.Iso8601">
-            <summary>
-            .NET format string for ISO 8601 date format
-            </summary>
-        </member>
-        <member name="F:RestSharp.DateFormat.RoundTrip">
-            <summary>
-            .NET format string for roundtrip date format
-            </summary>
-        </member>
-        <member name="T:RestSharp.ResponseStatus">
-            <summary>
-            Status for responses (surprised?)
-            </summary>
-        </member>
-        <member name="T:RestSharp.Extensions.MiscExtensions">
-            <summary>
-            Extension method overload!
-            </summary>
-        </member>
-        <member name="M:RestSharp.Extensions.MiscExtensions.ReadAsBytes(System.IO.Stream)">
-            <summary>
-            Read a stream into a byte array
-            </summary>
-            <param name="input">Stream to read</param>
-            <returns>byte[]</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.MiscExtensions.CopyTo(System.IO.Stream,System.IO.Stream)">
-            <summary>
-            Copies bytes from one stream to another
-            </summary>
-            <param name="input">The input stream.</param>
-            <param name="output">The output stream.</param>
-        </member>
-        <member name="M:RestSharp.Extensions.MiscExtensions.AsString(System.Byte[])">
-            <summary>
-            Converts a byte array to a string, using its byte order mark to convert it to the right encoding.
-            http://www.shrinkrays.net/code-snippets/csharp/an-extension-method-for-converting-a-byte-array-to-a-string.aspx
-            </summary>
-            <param name="buffer">An array of bytes to convert</param>
-            <returns>The byte as a string.</returns>
-        </member>
-        <member name="T:RestSharp.Extensions.ReflectionExtensions">
-            <summary>
-            Reflection extensions
-            </summary>
-        </member>
-        <member name="M:RestSharp.Extensions.ReflectionExtensions.GetAttribute``1(System.Reflection.MemberInfo)">
-            <summary>
-            Retrieve an attribute from a member (property)
-            </summary>
-            <typeparam name="T">Type of attribute to retrieve</typeparam>
-            <param name="prop">Member to retrieve attribute from</param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Extensions.ReflectionExtensions.GetAttribute``1(System.Type)">
-            <summary>
-            Retrieve an attribute from a type
-            </summary>
-            <typeparam name="T">Type of attribute to retrieve</typeparam>
-            <param name="type">Type to retrieve attribute from</param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Extensions.ReflectionExtensions.IsSubclassOfRawGeneric(System.Type,System.Type)">
-            <summary>
-            Checks a type to see if it derives from a raw generic (e.g. List[[]])
-            </summary>
-            <param name="toCheck"></param>
-            <param name="generic"></param>
-            <returns></returns>
-        </member>
-        <!-- Badly formed XML comment ignored for member "M:RestSharp.Extensions.ReflectionExtensions.FindEnumValue(System.Type,System.String,System.Globalization.CultureInfo)" -->
-        <member name="M:RestSharp.Extensions.StringExtensions.UrlEncode(System.String)">
-            <summary>
-            Uses Uri.EscapeDataString() based on recommendations on MSDN
-            http://blogs.msdn.com/b/yangxind/archive/2006/11/09/don-t-use-net-system-uri-unescapedatastring-in-url-decoding.aspx
-            </summary>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.HasValue(System.String)">
-            <summary>
-            Check that a string is not null or empty
-            </summary>
-            <param name="input">String to check</param>
-            <returns>bool</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.RemoveUnderscoresAndDashes(System.String)">
-            <summary>
-            Remove underscores from a string
-            </summary>
-            <param name="input">String to process</param>
-            <returns>string</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.ParseJsonDate(System.String,System.Globalization.CultureInfo)">
-            <summary>
-            Parses most common JSON date formats
-            </summary>
-            <param name="input">JSON value to parse</param>
-            <returns>DateTime</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.RemoveSurroundingQuotes(System.String)">
-            <summary>
-            Remove leading and trailing " from a string
-            </summary>
-            <param name="input">String to parse</param>
-            <returns>String</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.Matches(System.String,System.String)">
-            <summary>
-            Checks a string to see if it matches a regex
-            </summary>
-            <param name="input">String to check</param>
-            <param name="pattern">Pattern to match</param>
-            <returns>bool</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.ToPascalCase(System.String,System.Globalization.CultureInfo)">
-            <summary>
-            Converts a string to pascal case
-            </summary>
-            <param name="lowercaseAndUnderscoredWord">String to convert</param>
-            <returns>string</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.ToPascalCase(System.String,System.Boolean,System.Globalization.CultureInfo)">
-            <summary>
-            Converts a string to pascal case with the option to remove underscores
-            </summary>
-            <param name="text">String to convert</param>
-            <param name="removeUnderscores">Option to remove underscores</param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.ToCamelCase(System.String,System.Globalization.CultureInfo)">
-            <summary>
-            Converts a string to camel case
-            </summary>
-            <param name="lowercaseAndUnderscoredWord">String to convert</param>
-            <returns>String</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.MakeInitialLowerCase(System.String)">
-            <summary>
-            Convert the first letter of a string to lower case
-            </summary>
-            <param name="word">String to convert</param>
-            <returns>string</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.IsUpperCase(System.String)">
-            <summary>
-            Checks to see if a string is all uppper case
-            </summary>
-            <param name="inputString">String to check</param>
-            <returns>bool</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.AddUnderscores(System.String)">
-            <summary>
-            Add underscores to a pascal-cased string
-            </summary>
-            <param name="pascalCasedWord">String to convert</param>
-            <returns>string</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.AddDashes(System.String)">
-            <summary>
-            Add dashes to a pascal-cased string
-            </summary>
-            <param name="pascalCasedWord">String to convert</param>
-            <returns>string</returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.AddUnderscorePrefix(System.String)">
-            <summary>
-            Add an undescore prefix to a pascasl-cased string
-            </summary>
-            <param name="pascalCasedWord"></param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Extensions.StringExtensions.GetNameVariants(System.String,System.Globalization.CultureInfo)">
-            <summary>
-            Return possible variants of a name for name matching.
-            </summary>
-            <param name="name">String to convert</param>
-            <param name="culture">The culture to use for conversion</param>
-            <returns>IEnumerable&lt;string&gt;</returns>
-        </member>
-        <member name="T:RestSharp.Extensions.XmlExtensions">
-            <summary>
-            XML Extension Methods
-            </summary>
-        </member>
-        <member name="M:RestSharp.Extensions.XmlExtensions.AsNamespaced(System.String,System.String)">
-            <summary>
-            Returns the name of an element with the namespace if specified
-            </summary>
-            <param name="name">Element name</param>
-            <param name="namespace">XML Namespace</param>
-            <returns></returns>
-        </member>
-        <member name="T:RestSharp.FileParameter">
-            <summary>
-            Container for files to be uploaded with requests
-            </summary>
-        </member>
-        <member name="M:RestSharp.FileParameter.Create(System.String,System.Byte[],System.String,System.String)">
-            <summary>
-             Creates a file parameter from an array of bytes.
-            </summary>
-            <param name="name">The parameter name to use in the request.</param>
-            <param name="data">The data to use as the file's contents.</param>
-            <param name="filename">The filename to use in the request.</param>
-            <param name="contentType">The content type to use in the request.</param>
-            <returns>The <see cref="T:RestSharp.FileParameter"/></returns>
-        </member>
-        <member name="M:RestSharp.FileParameter.Create(System.String,System.Byte[],System.String)">
-            <summary>
-             Creates a file parameter from an array of bytes.
-            </summary>
-            <param name="name">The parameter name to use in the request.</param>
-            <param name="data">The data to use as the file's contents.</param>
-            <param name="filename">The filename to use in the request.</param>
-            <returns>The <see cref="T:RestSharp.FileParameter"/> using the default content type.</returns>
-        </member>
-        <member name="P:RestSharp.FileParameter.ContentLength">
-            <summary>
-            The length of data to be sent
-            </summary>
-        </member>
-        <member name="P:RestSharp.FileParameter.Writer">
-            <summary>
-            Provides raw data for file
-            </summary>
-        </member>
-        <member name="P:RestSharp.FileParameter.FileName">
-            <summary>
-            Name of the file to use when uploading
-            </summary>
-        </member>
-        <member name="P:RestSharp.FileParameter.ContentType">
-            <summary>
-            MIME content type of file
-            </summary>
-        </member>
-        <member name="P:RestSharp.FileParameter.Name">
-            <summary>
-            Name of the parameter
-            </summary>
-        </member>
-        <member name="T:RestSharp.Http">
-            <summary>
-            HttpWebRequest wrapper (async methods)
-            </summary>
-            <summary>
-            HttpWebRequest wrapper
-            </summary>
-        </member>
-        <member name="M:RestSharp.Http.AsPostAsync(System.Action{RestSharp.HttpResponse},System.String)">
-            <summary>
-            Execute an async POST-style request with the specified HTTP Method.  
-            </summary>
-            <param name="httpMethod">The HTTP method to execute.</param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Http.AsGetAsync(System.Action{RestSharp.HttpResponse},System.String)">
-            <summary>
-            Execute an async GET-style request with the specified HTTP Method.  
-            </summary>
-            <param name="httpMethod">The HTTP method to execute.</param>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Http.Create">
-            <summary>
-             Creates an IHttp
-            </summary>
-            <returns></returns>
-        </member>
-        <member name="M:RestSharp.Http.#ctor">
-            <summary>
-            Default constructor
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.HasParameters">
-            <summary>
-            True if this HTTP request has any HTTP parameters
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.HasCookies">
-            <summary>
-            True if this HTTP request has any HTTP cookies
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.HasBody">
-            <summary>
-            True if a request body has been specified
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.HasFiles">
-            <summary>
-            True if files have been set to be uploaded
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.UserAgent">
-            <summary>
-            UserAgent to be sent with request
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.Timeout">
-            <summary>
-            Timeout in milliseconds to be used for the request
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.Credentials">
-            <summary>
-            System.Net.ICredentials to be sent with request
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.CookieContainer">
-            <summary>
-            The System.Net.CookieContainer to be used for the request
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.Files">
-            <summary>
-            Collection of files to be sent with request
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.FollowRedirects">
-            <summary>
-            Whether or not HTTP 3xx response redirects should be automatically followed
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.Headers">
-            <summary>
-            HTTP headers to be sent with request
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.Parameters">
-            <summary>
-            HTTP parameters (QueryString or Form values) to be sent with request
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.Cookies">
-            <summary>
-            HTTP cookies to be sent with request
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.RequestBody">
-            <summary>
-            Request body to be sent with request
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.RequestContentType">
-            <summary>
-            Content type of the request body.
-            </summary>
-        </member>
-        <member name="P:RestSharp.Http.Url">
-            <summary>
-            URL to call for this request
-            </summary>
-        </member>
-        <member name="T:RestSharp.HttpCookie">
-            <summary>
-            Representation of an HTTP cookie
-            </summary>
-        </member>
-        <member name="P:RestSharp.HttpCookie.Comment">
-            <summary>
-            Comment of the cookie
-            </summary>
-        </member>
-        <member name="P:RestSharp.HttpCookie.CommentUri">

<TRUNCATED>

Mime
View raw message