cloudstack-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Rakesh Venkatesh <www.rakeshv....@gmail.com>
Subject Re: Unable to ping secondary NIC ip of a VM in VPC
Date Thu, 13 Aug 2020 07:44:18 GMT
Hi Andrija

Yes if I configure eth1 manually inside VM to get Ip from dhcp then ping
works fine but not sure how to do this inside windows vm

On Wed, Aug 12, 2020 at 10:43 PM Andrija Panic <andrija.panic@gmail.com>
wrote:

> Hi Rakesh,
>
> if you configure eth1 manually inside a VM, but set it to obtain the IP via
> DHCP, does it obtain the IP properly then?
>
> Best,
>
> On Tue, 11 Aug 2020, 12:41 Rakesh Venkatesh, <www.rakeshv.com@gmail.com>
> wrote:
>
> > Wei,
> >
> > This was the test done on ubuntu os. The initial issue was found on
> windows
> > vm.
> >
> > Even if it can be solved by adding some config inside the vm, do we need
> to
> > do every time we delete/add additional NIC's to vm? That will be extra
> work
> > all the time right?
> >
> > On Mon, Aug 10, 2020 at 5:43 PM Wei ZHOU <ustcweizhou@gmail.com> wrote:
> >
> > > Hi Rakesh,
> > >
> > > It is not a bug. you need to configure the networks inside vm. for
> > example
> > > /etc/network/interfaces in old ubuntu versions or /etc/netplan in newer
> > > ubuntu versions.
> > >
> > > -Wei
> > >
> > > On Monday, 10 August 2020, Rakesh Venkatesh <www.rakeshv.com@gmail.com
> >
> > > wrote:
> > >
> > > > Hello Thomas
> > > >
> > > >
> > > > Thanks for the reply. It looks like the NIC is not configured
> properly
> > in
> > > > VM. I dont see IP 10.10.2.23 being configured
> > > >
> > > > # ip a
> > > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
> > group
> > > > default qlen 1
> > > >     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> > > >     inet 127.0.0.1/8 scope host lo
> > > >        valid_lft forever preferred_lft forever
> > > >     inet6 ::1/128 scope host
> > > >        valid_lft forever preferred_lft forever
> > > > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> > > state
> > > > UP group default qlen 1000
> > > >     link/ether 02:00:78:24:00:01 brd ff:ff:ff:ff:ff:ff
> > > >     inet 10.10.1.51/24 brd 10.10.1.255 scope global eth0
> > > >        valid_lft forever preferred_lft forever
> > > >     inet6 fe80::78ff:fe24:1/64 scope link
> > > >        valid_lft forever preferred_lft forever
> > > > 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
> > > default
> > > > qlen 1000
> > > >     link/ether 02:00:1f:ed:00:0e brd ff:ff:ff:ff:ff:ff
> > > >
> > > >
> > > >
> > > > I removed the secondary NIC, stopped the vm, added secondary NIC and
> > > > started the VM. The extra NIC is still not configured in VM.
> > > > Is this a bug?
> > > >
> > > > On Mon, Aug 10, 2020 at 4:46 PM Thomas Joseph <
> thomas.job07@gmail.com>
> > > > wrote:
> > > >
> > > > > Hello Venkatesh,
> > > > >
> > > > > I'm guessing from the output provided that you have tried to ping
> the
> > > ip
> > > > > from the VR.
> > > > > Have you checked if the NIC is up on the VM?
> > > > >  you can run tcpdump on the related VM to check if the icmp packets
> > are
> > > > > reaching the VM.
> > > > >
> > > > > Regards
> > > > > Thomas
> > > > >
> > > > > On Mon, 10 Aug 2020, 8:06 pm Rakesh Venkatesh, <
> > > > www.rakeshv.com@gmail.com>
> > > > > wrote:
> > > > >
> > > > > > Hello,
> > > > > >
> > > > > > I have created a VPC with three tiers in it (tier1, tier2. tier3)
> > > using
> > > > > > cloudstack 4.14.0.0 version with Ubuntu16 as OS for mgt, agent
> > > > > > I created a VM in tier1 and I am able to ping its IP address
> > > > > >
> > > > > > # ping 10.10.1.51
> > > > > > PING 10.10.1.51 (10.10.1.51): 56 data bytes
> > > > > > 64 bytes from 10.10.1.51: icmp_seq=0 ttl=64 time=2.273 ms
> > > > > > 64 bytes from 10.10.1.51: icmp_seq=1 ttl=64 time=1.690 ms
> > > > > > ^C--- 10.10.1.51 ping statistics ---
> > > > > >
> > > > > >
> > > > > > After adding secondary NIC to vm from tier2 or tier3 then I
am
> not
> > > able
> > > > > to
> > > > > > ping that IP address.
> > > > > >
> > > > > > # ping 10.10.2.23
> > > > > > PING 10.10.2.23 (10.10.2.23): 56 data bytes
> > > > > > 92 bytes from 10.10.2.254: Destination Host Unreachable
> > > > > > 92 bytes from 10.10.2.254: Destination Host Unreachable
> > > > > > 92 bytes from 10.10.2.254: Destination Host Unreachable
> > > > > > 92 bytes from 10.10.2.254: Destination Host Unreachable
> > > > > > ^C--- 10.10.2.23 ping statistics ---
> > > > > >
> > > > > >
> > > > > >
> > > > > > Dchphost content
> > > > > >
> > > > > > # cat /etc/dhcphosts.txt
> > > > > > 02:00:72:36:00:01,10.10.2.83,tier12,infinite
> > > > > > 02:00:2f:16:00:0c,set:10_10_2_23,10.10.2.23,tier11,infinite
> > > > > > 02:00:78:24:00:01,10.10.1.51,tier11,infinite
> > > > > >
> > > > > >
> > > > > >
> > > > > > Dhcpopts content
> > > > > >
> > > > > >
> > > > > > # cat /etc/dhcpopts.txt
> > > > > > 10_10_2_23,3
> > > > > > 10_10_2_23,6
> > > > > > 10_10_2_23,15
> > > > > >
> > > > > >
> > > > > > I don't see any errors in /var/log/cloud.log on VR when secondary
> > nic
> > > > is
> > > > > > added.
> > > > > > Is there any other I can troubleshoot this or look for logs?
> > > > > >
> > > > > > --
> > > > > > Thanks and regards
> > > > > > Rakesh
> > > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > Thanks and regards
> > > > Rakesh venkatesh
> > > >
> > >
> >
> >
> > --
> > Thanks and regards
> > Rakesh venkatesh
> >
>


-- 
Thanks and regards
Rakesh venkatesh

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message